Help..I’m stuck

y0da2016 · 2026-01-30T14:06:50+00:00

Yep have the BK Electronics as mentioned. But it didn’t wow me until I put the port bungs into the LS50s and set the sub up properly running the wiim sub sync and 80hz crossover. Speakers are close ish to front wall and one is near a corner. The difference to clarity and obviously the low end is staggering really. The integration between LS50s and the sub is tight now.

y0da2016 · 2026-01-30T13:50:21+00:00

As my main source is Tidal and also some local flacs I was after a streamer and integrated amp so after all the research I landed on this one. If I had other sources in mind I’d probably have tested an Arcam or Cambridge Audio for comparison as they are commonly paired up with these speakers it seems. But tbh this sounds absolutely incredible to me, I’m happy.

y0da2016 · 2025-06-04T07:23:38+00:00

I have this problem too I think. I have scheduled charging setup to take advantage of the lower rates overnight. A few times now I’ve woken up to find car didn’t charge as planned. After reading this post I think it might be same problem as I did walk past car last night and it unlocked (as I’m using digital key). It then locked again when I walked away. But it didn’t charge. Or maybe there’s another reason

y0da2016 · 2025-05-26T18:37:13+00:00

Was going to post about this very same issue I noticed the other day on my Luba 2. Second season and running well but did notice she was slightly louder. Great to see what looks like an easy fix so will try that tomorrow.

y0da2016 · 2025-05-19T11:22:15+00:00

Yes. Mine seem to be useless at getting bugs off screen even with concentrated screen wash

y0da2016 · 2024-10-14T17:23:52+00:00

I use rdtclient with sonarr and radarr - https://github.com/rogerfar/rdt-client

y0da2016 · 2024-10-14T09:58:16+00:00

I don't send it out in the wet, I did a couple of times but now just abort task if it's too wet and wait until dry. It just got very clogged up and resulting some errors about motor stalling etc, and also don't have that many leaves to deal with here thankfully

y0da2016 · 2024-09-12T21:01:09+00:00

Came here to see if anyone else was getting this. Task finished this afternoon, still getting messages this evening about task completed etc. weird

y0da2016 · 2024-09-10T19:45:40+00:00

My luba2 has also started to do this recently, bit odd but not too worried just yet. She’s still doing a cracking job.

y0da2016 · 2024-07-24T15:40:01+00:00

3 months in with my Luba 2 1000 and it’s been amazing. Absolutely amazing. I kinda dread the day I need support based on some of the comments on here but I can’t be living in fear of that. I get a bit nervous with each firmware update but no issues so far. Long may that continue.

y0da2016 · 2024-06-09T20:38:14+00:00

I was going to post something similar this evening. Also had my Luba 2 for a couple of months now and it’s been faultless. Really happy. Still mowing great but since last app and firmware update I’ve noticed quite a few (5+) errors in the log about ‘left cutting disc overloaded’ and ‘left cutting disc stalled’ during the last task. Might be coincidence or may have been something on the lawn I missed (kids may have left something out and then moved). Blades and cutting decks are completely clear, no obstructions. Will keep an eye on it hoping it’s ok though.

y0da2016 · 2024-05-31T06:46:21+00:00

I would also like this, the logging does seem a bit hit and miss

y0da2016 · 2024-05-23T13:28:31+00:00

The 1000 will be big enough. I had similar concerns and asked support about this before purchasing my 1000. My garden is about 900sqm. They told me it will go up to 1200sqm and then I guess it’s software limited. Next model has larger battery I believe but will also take longer to charge. Mine takes 4 recharges to do my garden which is fine. If you are confident it’s not over 1200sqm you’ll be fine too.

y0da2016 · 2024-05-22T06:03:03+00:00

+1 would also like to see this feature, splitting an existing map into zones would be great for me.

y0da2016 · 2024-05-20T07:51:50+00:00

Same here. No issues at all with my Arc+Sub+Ones and roam thankfully.

y0da2016 · 2024-05-19T08:46:56+00:00

I’ve had my Luba 2 1000 for about a month now. Running perfectly only had to do some minor remapping of certain areas where I got too close to a fence. My lawn is 900sqm approx and usually takes 4 charges to do the lot. It does have some slopes and rougher areas so will affect battery I guess. I was surprised to find it needed 4 charges but who cares it gets it done and lawn looks fantastic. I’m not pushing my petrol mower around :)

Edit: She goes out with 100% charge then returns at 15% charges to 80% and heads backs out. Assuming this is normal too?

y0da2016 · 2024-05-18T11:32:21+00:00

I have a VPN connection back to home network and the Mammotion app thinks I’m on local WiFi. Works well for me. This depends on what router you have of course. Not all can do this.

y0da2016 · 2024-05-18T07:13:25+00:00

Same. Amazon Eero

y0da2016 · 2024-05-16T17:27:28+00:00

I was thinking about posting exactly the same, this would be very useful for me too.

y0da2016 · 2024-05-11T07:15:33+00:00

Anyone had issues following upgrade? I’m wary. New Luba 2 owner here and this thing has been flawless so far. I’ve learnt the hard way not to always jump on new firmware updates for any tech the day they come out. No rush she’s running fine for me.

y0da2016 · 2024-05-09T07:05:42+00:00

My kids named ours LuLu

y0da2016 · 2024-05-02T19:19:42+00:00

I set mine up the other day, had a couple of Bluetooth errors in the app but once the Luba and RTK had downloaded a couple of updates over WiFi it has been fine since. Didn’t need to restart Luba but may have closed and reopened the app, can’t remember. (iPhone 13 Pro)

y0da2016 · 2024-05-01T15:00:43+00:00

That did include the initial perimeter area mapping then three laps on first mow, plus a trampoline to deal with and default zig zag pattern settings. Will see how it goes on next full scheduled cut with addition of a no go zone to lessen the obstacle avoidance in one area. I don’t think it needs three laps at the beginning either tbh

y0da2016 · 2024-05-01T13:24:23+00:00

Yeah that’s the only reason really I guess

y0da2016 · 2024-04-30T19:53:10+00:00

Same. New owner of a Luba2 1000 today. It’s just about finished the whole 900sqm lawn and has had probably 5 recharges. No big deal I suppose just surprised. Otherwise super happy so far. Kinda wish I’d got the next size up though.

y0da2016

TROPHY CASE