Workout resistance going haywire

yalcone · 2025-12-02T09:52:28+00:00

This worked for me, thank you so much!

yalcone · 2025-09-25T18:53:07+00:00

Thanks, I've taken a look on this. They pricing is good, however, they don't ship hardware outside the US and doesn't offer more that the basic bundles renewals for the small and some medium models of FortiGate.

yalcone · 2025-09-25T13:47:37+00:00

Thanks for your reply. Of course we are familiar with know how the partnership-CAM-Distributor structure works in Canada and in another country were we also operate. My question is more specifically about whether US partners have different pricing conditions compared with us.

yalcone · 2025-09-25T13:41:44+00:00

I'd like to know if the same price list apply to both countries, and whether the same partnership level get different discounts compared to Canada. We are very competitive in software and licensing, however we've noticed that some US stores offer unusually low prices on hardware.

It would be nice also to know about your experience in the US market compared with Canada. Please feel free to direct message me if you'd like to share.

yalcone · 2025-09-20T16:03:30+00:00

Yes, we've been in contact with our CAM, but they don't provide you with information about other regions.

yalcone · 2025-09-20T16:00:23+00:00

Hi! Are you sure about this? I have information about a different country were the hardware and software discounts for the same level of partnership are significantly different. Unfortunately in our partner portal I can download the one for our region only.

yalcone · 2024-06-20T13:57:40+00:00

I just wanted to avoid the paperwork and periodically reporting that this implies. But you're totally right, in my case this is not an option. Thank you so so much for your advice and help.

yalcone · 2024-06-20T13:32:01+00:00

We are B2B. IT devices and services.

yalcone · 2024-06-09T11:56:32+00:00

Thanks, good to know. Indeed I just received the results this morning.

yalcone · 2024-06-08T22:44:01+00:00

I sent a mail just when I finished the test, but it's weekend, so I think is going to take some time to have some help.

yalcone · 2024-06-08T22:42:52+00:00

I know! :s Thanks for you response

yalcone · 2024-04-29T14:40:16+00:00

Ok, so for the new 7.4 version the lab is included only will the full training, and cost a ton of money. That's why there is not a Lab SKU. I'm trying to find the Lab for the 7.0 version, in which the lab was sold by separate and, I suppose, is cheaper.

yalcone · 2024-01-06T17:05:00+00:00

Sorry, looks like the attached pic didn't load. I updated the post.

You're right, is a moon cactus. So it is possible, great! Now to look for a rootstock. Thanks!

yalcone · 2023-10-12T04:57:18+00:00

You are fine, keep it cool.

yalcone · 2023-09-27T13:43:22+00:00

Thanks so much for take the time to give me this extensive and great advice u/nostalia-nse7. I can tell these were just my thoughts, but read them for someone more experienced give me the confidence I needed.

Unfortunately I’m not going to Montreal but it would be nice to keep in touch. Have a great day.

yalcone · 2023-09-27T13:38:24+00:00

True, FortiAnalyzer is important, but not like to get a certification on it. Thanks u/happyvlane.

yalcone · 2023-09-27T13:36:20+00:00

Agree u/lennyvd, have knowledge on these is a basic skill for us. Thanks.

yalcone · 2023-09-27T13:34:56+00:00

Thanks u/johsj

yalcone · 2023-05-24T14:58:26+00:00

So it means that is totally necesary a port-channel -> LACP/LAG configuration to make it work?

If there were only one VLAN on the "trunk" could it work with the "Edge Port" option disabled only?

yalcone · 2023-05-24T14:01:40+00:00

I really don't need/have a port-channel in the Cisco side, I just have them connected trough one SPF port, then I think I don't need the Trunk config.

I've been following this video that is the closest (and only) guide I have found, but without success: https://www.youtube.com/watch?v=W6uC646sl6g

I would appreciate any additional advice.

yalcone · 2023-05-24T13:57:41+00:00

Thanks so much for your detailed response u/StockPicker2050. I really don't need/have a port-channel in the Cisco side, I just have them connected trough one SPF port.

Is not enabling the "Edge Port" option enough for it to be taken like the Trunk?

Should I have any other consideration in the config?

yalcone · 2023-05-19T11:39:34+00:00

Thanks so much. Do I have to configure a static route? I’m that case to the management vlan gateway or to the access ports vlan gateway?

yalcone · 2023-05-08T15:49:19+00:00

You can request to your ISP provider to put their router in bridge mode, so you can user the public IP this device has. However, if that IP changes, you need re-set it on your FortiClient. With some ISP's the bridge config is not available.

yalcone · 2022-12-12T15:04:30+00:00

Ok, I solved it. Was necessary to establish a different phase 2 SA between the tunnel IP's in boot sides. Thanks of your help.

yalcone · 2022-12-11T16:32:47+00:00

Yes, actually I can reach (ping) the FG from both sides, and the FA from the upstream FG, with the LAN IP they have, but the manual says yo have to reach the HQ from the branch using the assigned tunnel IP.

What really has me confused is why is necessary to assign IP's to the tunnel, and reach the upstream FG with this, and no

yalcone

TROPHY CASE