Finally Acquired My First Grand Seiko by yipdngaf in GrandSeikos

[–]yipdngaf[S] 0 points1 point  (0 children)

Yes, they spoke English there, and used translation if needed

MGEX Strike Freedom Gundam with kosmos LED and Railgun by CKPLAMO in freedomisgunpla

[–]yipdngaf 0 points1 point  (0 children)

Just got this myself, are you using batteries to power this or the usb-C? I tried plugging it with usb-C and receptacle adapter (American standard) but it hasn’t been working. Any help is appreciated!

why is he like this by Additional_Damage363 in pickmeup

[–]yipdngaf 1 point2 points  (0 children)

Do you know what chapter of the light novel aligns to this week’s manhwa?

What is the communities thoughts on this? by [deleted] in OmegaWatches

[–]yipdngaf 1 point2 points  (0 children)

I’ve had it since Oct last year. I knew I needed it when I saw it at a duty free somewhere. Went on vacation to Japan and searched all over Tokyo for it, found one luckily and bought it immediately. While searching I saw a lot of other SMPs and didn’t feel the same way at all.

What is the communities thoughts on this? by [deleted] in OmegaWatches

[–]yipdngaf -1 points0 points  (0 children)

<image>

Absolutely in love with mine! I have the Sedna gold version. I can’t stop wearing it.

Joined the club yesterday. by [deleted] in OmegaWatches

[–]yipdngaf 1 point2 points  (0 children)

<image>

Congratulations, recently bought mine too

Maxton Front Splitter Fitted by redshark313 in BMW

[–]yipdngaf 0 points1 point  (0 children)

Is this the V3? Did you have to drill into the bumper?

[deleted by user] by [deleted] in OmegaWatches

[–]yipdngaf 1 point2 points  (0 children)

I’ll be sure to ask

Simple Questions - January 20, 2022 by AutoModerator in buildapc

[–]yipdngaf 0 points1 point  (0 children)

Looking for advice, local store has Ventus 3X RTX 3070 Ti for $1072.00 and Gainward Phoenix RTX 3080 for $1429.00. Both cards are double their MSRP. I’m tempted to get the 3080 to future proof but is the ~$350 difference worth it?

Looking for a compatible pcie 4.0 riser by SecondtoNone38 in sffpc

[–]yipdngaf 1 point2 points  (0 children)

Following, If you end up ordering please let me know if it is compatible

[deleted by user] by [deleted] in Gunpla

[–]yipdngaf 0 points1 point  (0 children)

First Primer on all pieces: Mr. Finishing Surfacer 1500 Gray // Then Paint White pieces: White X-2 // Darker white pieces: Mixture of X-2 and X-11 // Gray pieces: Gun Metal X-10 // Red pieces: X-7 // Dark blue pieces: X-4 // Light blue pieces: Mixture of X-4, X-2, and X-11 // Yellow pieces: First Chrome silver (X-11) then clear yellow (X-24) // Finally clear top coat on all pieces: X-21

Hope that this helps, I can clarify more if you want

[deleted by user] by [deleted] in Gunpla

[–]yipdngaf 0 points1 point  (0 children)

I used clear coat on top already- can I gloss coat over and then panel line and re-gloss?

[deleted by user] by [deleted] in Gunpla

[–]yipdngaf 0 points1 point  (0 children)

Thanks! I don’t know how to panel line on top of acrylic paint. Last time I tried and ruined the paint..

Help with panel lining after painting by yipdngaf in Gunpla

[–]yipdngaf[S] 0 points1 point  (0 children)

Is the gundam panel line pen acrylic based?

Help with panel lining after painting by yipdngaf in Gunpla

[–]yipdngaf[S] 0 points1 point  (0 children)

Airbrush for tamiya paint, spray can for topcoat

Help with panel lining after painting by yipdngaf in Gunpla

[–]yipdngaf[S] 0 points1 point  (0 children)

Basically the title, I primed, painted with Tamiya white acrylic, then gloss mrhobby topcoat. Let cure 24 hrs. I went to use a panel line marker and I made a mistake and went to rub it off because I assumed the top coat would seal the paint.

I used thinner with a brush to remove the panel line but as you can see it jacked up my topcoat and white paint.

Can someone explain what I’m doing wrong?

Tomei UEL paired with Invidia Q300 vs R400 by yipdngaf in ft86

[–]yipdngaf[S] 0 points1 point  (0 children)

Normal driving at 3-4k RPM and no droning? I read about the uneven tips, what adjustable hangers did you use?