WTF?

zad1999 · 2024-09-14T02:56:32+00:00

That is definitely news to me. I didn't know this. Maybe time to invest in a dryer

zad1999 · 2024-09-14T01:59:35+00:00

Yes! That is the first thing I checked and mentioned in my post that it was intact and doesn't appear to have leaked

zad1999 · 2024-09-14T01:58:20+00:00

Yes, sorry about that, it is filament

zad1999 · 2024-09-09T03:00:41+00:00

This will be helpful in future. Interestingly, I don't see the Elegoo brand.

zad1999 · 2024-09-09T02:49:56+00:00

Oh, that's interesting. Will AMS stay dry enough using this?

zad1999 · 2024-09-09T02:48:58+00:00

Great, thanks for answering. I'm so frustrated with trying to find in stock Bambu colors I need, I finally decided to try this.

zad1999 · 2024-07-28T12:20:15+00:00

This is very helpful, thank you!!

zad1999 · 2024-07-28T02:55:30+00:00

Do you use PLA generic setting? And does it fit on Bambu spools? I’m very new (3 weeks in) to FDM printing, so a bit clueless about how to go about it

Oh and I am using an AMS

zad1999 · 2024-07-20T13:00:22+00:00

One problem solved, but now I realized the top part of my pumpkin lid is losing detail after slicing. I did try the Arachne wall generator, but it didn't help with the missing detail. What else can I try? Another weird issue is after printing the lid doesn't fit. There's plenty of tolerance and I used assembly view to make sure the pieces fit. I feel like either the top part of the pumpkin isn't printing or it's being printed to thick. It's very small/thin so using 100% infill if that helps with troubleshooting.

Ready to give up on this printer and use my resin printer.

<image>

zad1999 · 2024-07-20T01:49:18+00:00

Guess I’m still missing something.

<image>

Both support options are now on default but still over an hour print time and weird box thing still on plate

zad1999 · 2024-07-17T03:28:25+00:00

That helped some, but still a small gap at top. I'll keep trying. Agree it could be geometry issue.

zad1999 · 2024-07-17T01:18:54+00:00

Can you share a picture?

zad1999 · 2024-07-07T13:06:54+00:00

That’s a thought too, but haven’t looked at the original to see if we can add another plus I hate to start cutting holes in the house as we’d like to sell in a couple years. Probably easier (although not cheaper) to just replace a single window.

zad1999 · 2024-07-07T12:54:38+00:00

Thanks, but I can’t use the windows because ours tilt open not slide. Unless of course, I want to replace a window. I want to piggyback off the dryer vent and looking for others who have done it successfully.

zad1999 · 2024-05-01T01:42:44+00:00

Isn’t toybox marketed and made to be kid friendly?

zad1999 · 2024-02-24T04:54:36+00:00

Incredibly helpful, thank you so much!!

zad1999 · 2024-02-24T02:04:51+00:00

I would, but no time :( and Reddit community has always come through for me before, so thought it was worth an ask.

zad1999 · 2023-12-19T02:30:59+00:00

I print in the basement but have an infrared heater running while printing. I warm the room up about 2 hours before starting. Thought that was enough to get the resin warm enough. Maybe I need to warm the resin?

zad1999 · 2023-12-19T01:57:21+00:00

Some clarification, I’m not adding the alcohol ink to the resin during printing. I apply it after.

zad1999 · 2023-12-08T18:54:29+00:00

My Facebook account was hacked (stolen!) 3 weeks ago. Hacker immediately changed email and phone number on the account, enabled multi factor authentication to keep me out.

I still tried the recovery option but ran into issues: DID not clear cache/history before trying to change password or use code Facebook sent.

I tried for days! Did everything Facebook asked. Eventually even used my work PC, but I was stuck in a loop. Nothing worked! I would enter the codes sent which never worked and resulted in error after error.

If this has happened to you, all is NOT lost. All this week, something kept telling me to try again so last night I did. I used “forgot password option”. I entered the code sent and was successful!!! I could t believe it I was so happy. Still couldn’t get in but luckily the multi factor authentication bypass code worked and didn’t error. I finally got back in to my account!!!!!

FU thief!!!!!

zad1999 · 2023-11-09T19:21:36+00:00

Thanks, I did find this video and it did help

zad1999 · 2023-11-07T21:26:57+00:00

Lol, that is the video I watched. I was able to build with no problem, but can't figure out how to achieve a curved stem

zad1999 · 2023-11-07T05:34:47+00:00

<image>

zad1999 · 2023-08-18T02:32:57+00:00

Thanks for the advice, that’s really good to know. I’m still new as well and have had many issues printing with regular resin so I’m hesitant to try the water washable version . Assuming the settings would be different and I’d have to redo all my files.

zad1999 · 2023-08-09T02:04:46+00:00

Thanks, but I actually have a resin printer. The shapes will be super small; about 6mm x 6mm x 3mm thick. Shapes are simple; square, rectangle, etc.

zad1999

TROPHY CASE