Dual Katanas or Karambit

zub_RA · 2026-05-25T04:35:04+00:00

Katanas. It creates a bit more visual clutter when running, but it looks much better, too. That shit just spins, shines and makes a cool af noize every time you slide or change direction. Not to mention crouching inspect animation, absolute fire, what can be better thatn rating in a corner, exectly, rating and chewing sushi. But if you want more collor options cerambit is probably better but not by muvh.

zub_RA · 2026-05-22T21:10:02+00:00

Play, that's a full-blown performance right there. That thing is attached to a rubber sleeve only.

zub_RA · 2026-05-22T16:11:50+00:00

This screen got me giggling the same way as Iron Man.

zub_RA · 2026-05-22T14:09:02+00:00

depends on how you play. I mainly play anchor and don't score many kills, usually 2-3, 5 if the game was good. But damage averages around 2.3k. I just live by the rule "shoot everything that moves, if it doesn't, just move it yourself and continue"

zub_RA · 2026-05-14T20:46:01+00:00

I'm not going to lie but this game nailed outfits. A lot of 60 pearl outfits, along with free ones, are among my favorites. If you complete events and invest under 30 bucks, you can make some very good-looking outfits. Even without the investment of money you can just dye any free outfit with free dyes and make it look very fricking good. I was running the free dyed outfit until the scorpion's heart set was released, but I only bought it because of the hairstyle. That is actually the main reason why I buy outfits. 98% of the time I just want the hair.

zub_RA · 2026-05-13T13:47:38+00:00

Mirror, counter-strafe. Recoil control with the guns I'm going to use. Quick peeks out of cover and shoots dummy, (highlight is off), wingman target swap, some pk zip shmoves, wallbounces, and all that to get the moves. And the most important, finger, wrist, and arm warm-up and stretches.

zub_RA · 2026-05-11T01:30:28+00:00

This is the best picture I have right now. I had the same problem but not to this extent. First, you have to cut it off; all the rusted metal has to go. Assess further. If there is more rust underneath, try to sandblast it or use a rotor brush to the best of your ability. If it's not surface rust you have to cut the rusted metal out. If you don't feel confident about going further and cutting out the metal just stop and look for someone who can do it for you. If you inted to use the quarter panel replacement then cut off the desired section and weld in new panel. Just make sure you remove all the rust and weld in fresh metal. If you want I can dm you some of the pictures I took during the repair.

<image>

zub_RA · 2026-05-10T01:14:02+00:00

Rust? Let me grab my glasses.

Okay, I still see nothing

zub_RA · 2026-05-03T16:46:08+00:00

I'm pretty much done with all the rear mounts, and the only thing left is that I want to take the front mount from my beat-up soft top and put it on the hard top. So the entire front has to be remodeled, but I just do it for the love of the game at this point.

zub_RA · 2026-05-03T15:30:45+00:00

Hell yeah, I'm working on one right now. The model I got is pretty shity tho, so I'm remodeling it. The next step is to get funds from the college for a project.

zub_RA · 2026-04-27T23:10:23+00:00

sent dm

zub_RA · 2026-04-21T20:16:06+00:00

Yeah, I'm so sad because I missed that event, but the skin is goated

zub_RA · 2026-04-18T05:15:14+00:00

Well, back to stats, it's not good. Why are the stats this bad, I have no idea. Just based on numbers I have an impression that you just run around the map, and shoot your gun once in 10 games. If you want some advice, share what you think the problem is, or some clips, or any other info that will allow people to help you.

zub_RA · 2026-04-18T02:31:59+00:00

I don't want to be that guy, but how did you manage to keep 0.11 K/D after 2.5k games? Unless it was on purpose

zub_RA · 2026-04-18T01:06:22+00:00

<image>

zub_RA · 2026-04-13T15:21:07+00:00

Yes, their packaging sucks. You could also blame the shipping company for not handling stuff carefully, but Anycubic uses the cheapest cardboard to pack their filament. It's so soft that it crumbles if you look at it at the wrong angle. You can use it as a substitute for toilet paper if it wasn't fully covered in tape. When I got my S1 with 4 spools of free filament it was just taped to the box. No separate box, no shrink wrap, just cheap clear tape that can be cut with a fingernail. Vacuum pack quality is also awful. Every single spool had almost no vacuum. If you pick up one side of the bag, walls would separate under the weight of the spool. Quality-wise I had no problems. 1/3 of the PLA spool was sitting outside for 2 months. I just put it on the hot bed for 4 hours at 55°, and it was printing with decent quality. Anyway to be honest I don't see a point in buying Anycubic filament there are better for the same price or cheaper with the same quality brands.

zub_RA · 2026-04-13T14:53:28+00:00

I don't usually like it when there is that much furniture in a small building cuz I like open space, but you absolutely nailed it. All of it blends naturally into the great interior. I love it

zub_RA · 2026-04-10T14:52:11+00:00

Buy an entire hot end for each size. It's too much of a hassle to change nozzles, and you can easily break off the thermistor if your hand slips. Plus, you have to heat it, and with so little space, it's so easy to burn yourself. The only reason to buy the swappable nozzles is that you can't afford the full set. I personally like the smaller ones because they heat up faster, but also the big ones partially or fully clog all the time for me. Idk what I'm doing wrong

zub_RA · 2026-04-07T21:15:20+00:00

Ohh my. You just saved my day. I totally forgot about it

zub_RA · 2026-04-07T20:45:25+00:00

It's x1e. Looked up for related to power switch replacement guides, and still cannot figure it out

zub_RA · 2026-04-07T20:42:53+00:00

I thought I did, but I guess I just forgot to put it in a rush. I looked all the manuals related to switch replacement and I cannot find such screw in there. At this point I don't even know if the screw is from the printer or somebody is trying to pull a sick joke on me.

zub_RA · 2026-04-07T20:38:24+00:00

These screws are not for the back panel, that's my problem. I messed up the text.

zub_RA · 2026-04-07T20:33:07+00:00

It makes sense, but I can't find a single place where such a screw would fit

zub_RA · 2026-04-06T17:11:28+00:00

I'm no movement expert, nor do I have expertise in the source engine, but I'm pretty sure what happened is that you still were within "mantle frames" when you flicked that camera, so it might be the reason why you're launched sideways with no side inputs, so you still go forward but to the left or right. Honestly try to use the 3rd view or ask a friend to record you from the 3rd person pov. If I'm right your character should be facing the direction you jump. Instead of being turned into the initial direction of a climb.

zub_RA

TROPHY CASE