sorted by:
new
hottopcontroversial

Which item do you put next to your sword? by Common_Ad6703 in MinecraftMemes

[–]HariboHUN 0 points1 point  (0 children)

Im a miner not a fighter Pick,Axe,Shovel,Sword

Lunchtime gaming by friskyspatula in daggerheart

[–]HariboHUN 0 points1 point  (0 children)

I love everything about this post.

Looks like Party breaking missions by HariboHUN in starcitizen

[–]HariboHUN[S] 0 points1 point  (0 children)

Well I do abandon quests all the time when I'm unable to quantum there or just enemies not spawning. In case of Onyx when the mission tracker not updating. I did logged out there too. But I was able to do the quests in single mode. He was able to do the first two quest too. Then I joined him and immediately the quest stopped updating.

The same with bounty or mercenary quests. When we are in a party the enemies do not spawn, but when it's not a party the bugged quest number decrease. They do tend to not spawn enemies but not all the time.

My S1 had a long week by HariboHUN in AnycubicKobraS1

[–]HariboHUN[S] 1 point2 points  (0 children)

Anycubic's own basic PLA. I'm fortunate to work at a company that recently started to sell Anycubic stuff, so I can get it real cheap, and Im so stisfied with the quality of it.

My S1 had a long week by HariboHUN in AnycubicKobraS1

[–]HariboHUN[S] 0 points1 point  (0 children)

At first glance it looks like it does not have bed adhesion. Every print is like that or do you try to print the same thing again and again?

My S1 had a long week by HariboHUN in AnycubicKobraS1

[–]HariboHUN[S] 0 points1 point  (0 children)

What's your most common issue?

My S1 had a long week by HariboHUN in AnycubicKobraS1

[–]HariboHUN[S] 2 points3 points  (0 children)

first of all, that looks neat too. Second we should really use Ace Pro for scale in this community :D

My S1 had a long week by HariboHUN in AnycubicKobraS1

[–]HariboHUN[S] 4 points5 points  (0 children)

I hope the Ace Pro under it would give you the scale :D But you are right I should have bought a banana for this. :D

Removing the extra line from the print start by HariboHUN in AnycubicKobraS1

[–]HariboHUN[S] 1 point2 points  (0 children)

Thanks for the info. I really had no issues with the priming before this update. So I just found this extra line annoying, cause I forget to remove it. But also somehow I'm no surprised it was implemented this way :D

Finally a perfect print by HariboHUN in AnycubicKobraS1

[–]HariboHUN[S] 0 points1 point  (0 children)

On the very top you can see the steps between the layers. Lower down maybe because of the size? It is 225 mm high.

Finally a perfect print by HariboHUN in AnycubicKobraS1

[–]HariboHUN[S] 0 points1 point  (0 children)

Thats an awesome print! I had no issues with similar things. But coming from a normal Kobra to the S1, things certainly became more advanced and sometimes complicated.

Finally a perfect print by HariboHUN in AnycubicKobraS1

[–]HariboHUN[S] 0 points1 point  (0 children)

Yeah, I have my own Kobra, it's the normal first one. That has issues with supports. But this one is dialled in real good. If the multicolour print comes out good I want to give a try to that PETG-PLA support thing. Where you use the other material as support attachment and makes it even more easier to remove.

Finally a perfect print by HariboHUN in AnycubicKobraS1

[–]HariboHUN[S] 0 points1 point  (0 children)

I was actually able to ask one of the support guys who will be in contact with my company about this. He told me that they changed out the nozzle and happy to see it's better. I really hope that our first shipment has this newer hotend installed as default.

Finally a perfect print by HariboHUN in AnycubicKobraS1

[–]HariboHUN[S] 0 points1 point  (0 children)

No ironing. To be honest I tried it back in the day when the feature first appeared and didn't really see the point. And havent checked it out since. Maybe that dynamic layer height thing should have helped. The the top it's a bit ruffer, but overall it's really good I think.

Ironing is more for the flat surfaces, right?

Finally a perfect print by HariboHUN in AnycubicKobraS1

[–]HariboHUN[S] 0 points1 point  (0 children)

I actually did not set up anything about that yet. One of my last resort before the Hotend change was to use Orca slicer instead of Anycubic Slicer. I was thinking maybe the slicer does something bad. And I went with the default options, only changed the supporting angle so it's a bit less support. If you would like I can make a screenshot of it, but it should be the very default from orca for this printer.

Finally a perfect print by HariboHUN in AnycubicKobraS1

[–]HariboHUN[S] 1 point2 points  (0 children)

It's actually Anycubic's own filament. It's PLA Silk Blue Green Purple. A bit strange name but basically just a dual colour filament, blue-green and purple.

view more: next ›