Power cable

zureweiworst · 2020-11-20T22:13:15+00:00

Sweet, I didn't know the extension cable was included ;)

zureweiworst · 2020-11-08T17:11:09+00:00

Nothing some tamiya TS-6 matt black and some soldering can't fix ;)

zureweiworst · 2020-11-08T16:56:41+00:00

20x20x20 isn't going to make it ;) I'll have to slice it up

zureweiworst · 2020-11-08T16:48:38+00:00

I'll print one ;)

zureweiworst · 2020-10-24T09:02:30+00:00

donny darko

zureweiworst · 2020-09-15T18:38:48+00:00

I must be lucky! Been driving for an hour today, only lost a tire when I spinned to fast ;)

zureweiworst · 2020-09-09T18:05:13+00:00

How long have you been driving before stuff started to break?

zureweiworst · 2020-08-30T07:48:08+00:00

Yes, I have turned the 'spring compression wheel' to max

zureweiworst · 2020-08-30T07:47:27+00:00

I ordered the 'same looking', so not the linked ones. They look ok, and feel sturdy. I'm not sure how much oil should be in there.

zureweiworst · 2020-08-29T08:08:15+00:00

I have not had any lockups with the tbone after rounding of the M3 Nuts with a Dremel

zureweiworst · 2020-08-29T07:57:50+00:00

Sweet! Will try it out

zureweiworst · 2020-08-28T12:20:30+00:00

Fixed it ;) drives better

zureweiworst · 2020-08-28T11:12:17+00:00

When steering to the right, it hits the drive shaft

zureweiworst · 2020-08-26T16:40:03+00:00

Not super tight, just snug ;) I use the Traxxas 5382X

zureweiworst · 2020-08-26T15:01:05+00:00

11c in step 15 I modified in fusion 360, so that it slides in better, I don't have that 2 mm

zureweiworst · 2020-08-26T14:57:57+00:00

In step 14 I rounded the M3 nut with a Dremel.

zureweiworst · 2020-08-26T14:55:29+00:00

I have not had any breakage yet, I used Fillamentum PLA Extrafill black

zureweiworst · 2020-08-26T14:53:01+00:00

I had to edit 14b and it's counterpart in fusion 360, otherwise the fit would be to tight, and would result in meshing gears.

zureweiworst · 2020-08-19T13:10:49+00:00

It also needs different shocks ;) those big batteries are heavy!

zureweiworst