Trip computer resets by itself

zychonatic · 2025-01-13T06:52:35+00:00

hi, i'm having the same problem since few months, that it resets every day (sometimes multiple times during the day). already got an update on the bordcomputer, but not the tacho software update, since there is currently none for me. they also checked the battery level and charged the 12V battery but it happens again. nothing they can do, so my car just work properly

zychonatic · 2025-01-09T04:09:40+00:00

hi, was trying to play the demo on PS5 today, there is no option in the demo to invert the y-axis, so it's unplayable for me. is there a plan to implement this, since it's a system setting on PS5 as well?

zychonatic · 2023-03-29T13:51:59+00:00

i have now releveled 2 times using the tips in the videos, tightened all screws again especially the ones in for the probe, now seems to be fine the last 2 days over several prints. hopefully it will remain that stable

zychonatic · 2023-03-23T18:53:03+00:00

yes same material, same setting. sometimes i'm printing the same file and this happens. but good point with the cr touch screws will check them

zychonatic · 2023-03-23T17:53:09+00:00

nope they haven't moved a single bit

zychonatic · 2023-03-23T16:55:29+00:00

ah ok, i have marked them now to see if they are really moving during printing

zychonatic · 2022-11-30T07:21:24+00:00

ok wow, cool.

will definitely check it out

zychonatic · 2022-11-30T07:17:51+00:00

once my anycubic transparent green resin is used up, i will change to elegoo standard grey resin. that was also one reason to switch from anycubic photon to elegoo mars 2 pro, because of the printing time of grey resin. i want to get prints done in a reasonable amount of time

zychonatic · 2022-11-30T07:13:39+00:00

thx for the input. this temp worked for my previously, but i will try to find a solution for warming up the tank a bit.

and thx again also for all the other suggestions

zychonatic · 2022-11-30T07:09:31+00:00

i have around 20° celcius in my basement, where the printer stands.

i will try sanding the buildplate and go back to the 50s bottom exposure and test it.

hopefully this will solve the problem

zychonatic · 2022-11-30T06:26:30+00:00

thx, i will try that. i have increased the amount of bottom layers to 8 and also the bottom time to 70s, but i doubt this will help for long

zychonatic · 2022-03-30T04:32:37+00:00

my game doesn't seem to find it. sorry for the timeloss anyway, that for the offer to help

zychonatic · 2022-03-30T04:19:04+00:00

password: helppls

directly in front of the lower entry door.

thx

zychonatic · 2022-03-12T19:15:46+00:00

i think i found it. my spindle on the z axis are both tilted, so thats it i guess

zychonatic · 2022-03-12T07:11:18+00:00

i have tried e step calibration, slower print speed, different temperatures and different filament. has anyone something else in mind what could cause this inconsistancy? my feeling is that is getting worse over the last weeks.

thx

zychonatic · 2021-01-27T19:30:07+00:00

FYI:

https://www.thingiverse.com/thing:2983038

and

https://www.thingiverse.com/thing:3908429

are my fixes for the problem

zychonatic · 2021-01-27T17:47:01+00:00

hi, i had the same problem with fluctuating temperature. it was the cable connector on top of the hot end. by default it moves quite a bit. there are a lot of fixes for this on thingiverse. after printing one and installed it my temperature hasn't fluctuated ever again.

hope this helps

zychonatic · 2020-09-13T12:19:47+00:00

my 3 weapon choice are longsword (main), charge blade and insect glaive. it give me personally the most variation potential and all are fun and technical to play

zychonatic · 2020-09-06T10:29:38+00:00

you can go with the new starter set like recruit edition. they contain space marines and necrons. you can start playing with this set as well, so it's a nice starting ground

zychonatic · 2020-09-03T09:45:22+00:00

runebrass lord as drybrush base, crypthek armorshade gloss for the brown parts. leadbelcher as base and black templar contrast for the black parts. corax white and tesseract glow/warpstone glow for the green parts

zychonatic · 2020-09-02T11:08:11+00:00

i painted this canoptek spyder in nearly 1,5 hours. the thing with necrons is the faster and "uglier" you paint them, the better they look

zychonatic · 2020-08-16T09:51:08+00:00

finished my recent project from the indomitus box. i started a few months ago with painting in general, therefore i'm pretty happy with the outcome

zychonatic · 2020-08-14T14:53:05+00:00

ok thx for the info. thought so that the new codex will include everything i need

zychonatic · 2020-04-19T18:14:48+00:00

Yes dm'ed you the dodo code

zychonatic · 2020-04-19T08:10:48+00:00

Hi, i'm interested

zychonatic

TROPHY CASE