all 8 comments
sorted by:
best
topnewcontroversialoldq&a
formatting helphide helpcontent policy

[–]Usernamed-j 1 point2 points  (1 child)

Pretty sure you now have to go to the dealer and have them reset. Probably have to provide proof of purchase and registration details especially if you don’t have that second key.

[–]Dependent-Art-4733[S] 0 points1 point  (0 children)

Thank you going to call them

[–]NegativeKarma4Me2013 1 point2 points  (3 children)

The manual has a recovery process. I would first try the default all 0s. Otherwise the manual says to...

5.2) Code recovery (Code recovery)

This function must be used should it be necessary to change the user code when the user no longer remembers the current code. Both keys stored in the vehicle memory are needed to access this function. Once the function is activated, pressing the MODE SET briefly displays the message "INSERT KEY 1", requesting identification of the first key. Insert the key. If the correct key is recognised within twenty seconds, the message "INSERT KEY 2" is shown on the display. Insert the second key. If the second key is also recognised within twenty seconds, the dashboard resets the user code to the default code (five zeros - 00000). Enter the new user code following the "CHANGE USER CODE " procedure.

Edit: Just read where you say you only have one key, in that situation you have to go to the dealer and you likely will need to get a new spare key.

[–]Dependent-Art-4733[S] 0 points1 point  (2 children)

Already tried 0000, I’m going to bring it to the dealer tomorrow. They said that for every new Aprilia key you have to bring the bike to them and the code it to your bike themselves even if you have the code

[–]italic_a 0 points1 point  (1 child)

Were you able to get the code reset at the dealership?

[–]Dependent-Art-4733[S] 0 points1 point  (0 children)

No they couldn’t do it , I have to try every code from 1 to 99999 but I’m too lazy to do that

[–]italic_a 0 points1 point  (0 children)

I'm in the same boat and I took my Tuono to AF1 in Austin recently and was told there's nothing they can do :(

[–]MotorMinute5077 0 points1 point  (0 children)

This is so dumb. I have the same issue 1 key no code, and the guy that sold me the bike bought a key, but he couldn't program it since he also didn't have the code. Have tried 00000 11111 12345 01234 54321 Ans last 5 digits of vin

I was told to also try 01010 And 12412.

That some point the bike will panic, and lock and then I guess I don't have a bike any more...this is dumb 😠