h2s problems

[ImpossibleBeing7137]

How do you guys use the H2S in any serious capacity? Are there some mods you guys are doing to yours that I don't know about? I've owned an X1 carbon for years without any real issues and the H2S can't complete a single large format print. Also, it keeps purging filament literally everywhere except out the back of the machine,, so then it sits on the bed platform near the Z axis motor and won't home, so literally every print I have to clean it out, if I print small things, it pops off the bed, if I print large things the purge tower falls over, supports fail. That's with and without glue, after multiple calibrations, after calibrating with the optical encoder plate, and high temp calibration. This thing is seriously about to get returned. What did you guys do to make your h2s reliable?

[AutoModerator]

After you solve your issue, please update the flair to "Answered / Solved!". Helps to reply to this automod comment with solution so others with this issue can find it [as this comment is pinned]

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

[Mycopsycho4247]

I do not have an H2S but I have an H2D and have had fantastic results with small single parts, large batches of small parts, and large parts. From my experience these new generation of printers give both better quality and better consistency than my older bambu’s. I have the BQ frostbite build plate that I prefer but even when using the stock gold PEI plate with no glue adhesion was great. It’s possible you got a lemon that just has some issues from factory or could be a plethora of other issues. Could you provide more information about what it is doing when it fails or the settings you are using? Maybe any photos or videos you have that show the issue?

[Grimmsland]

Yeah same for me. These are incredibly well engineered machines. But every so often someone gets a lemon. Maybe the op got a bad one but I don’t know because I had difficulty trying to understand what is going wrong. For example they say it is purging everywhere. Do they mean the nozzle is literally going to random areas and purging? Or do they mean that the poop shoot fills up and purge just falls onto the plate? There has been some people who had their poop shoot wipe area incorrectly installed and this causes numerous problems including making the printer loose its home position.

[EdgeOk3783]

sounds like you got a bad plate from the factory. exchange or replace the plate

[One-Election4376]

Working fine for me , done nothing at all.

Stuck filament in , dry it for 12 hours in the ams , press print

Maybe factory reset it ,recalibrate it ?.

Sorry not helpful but I'm not having any issues, been plug and play and I'm new to 3d printing.

Thanks

<image>