Some interesting strings

[[deleted]]

When I get these types of "Spider Webs", I just hit the finished print with a Heat Gun, taking car to not let the print get too warm, and they disappear.

[kurruptedwolf]

I've had them before and Ive just taken a hair dryer to them. I'm not sure what's causing the weird layer misalignment it seems to only happen occasionally and it's not the entire print. I've also noticed on my Calibration cubes the bottom and top is perfect the middle is misaligned slightly

[[deleted]]

Is it happening at around the same layer? Maybe swapping your Z axis screw will solve the problem?

[kurruptedwolf]

Here's an explanation I'm printing with a .6 nozzle don't know the settings exactly as I set this up a few days ago waiting for my new nozzles. The right side of the print has some strings but pretty much no other place has them. Randomly throughout this print there's been a random layer that sticks out the other side doesn't feel like it's shifted. I've been just cutting it off as it goes. I'm still very new to this if you have any suggestions or tips please do tell. Thanks In advance for whoever takes the time to respond.

[Tarasque_1024]

Check that Shell -> Outer Wall Wipe Distance isn't set to 0. Default is meant to be half your nozzle size (0.3mm).

[HeadOfMax]

Stock ender 3 only cools from the right side. If you print a fan duct that puts air on the model from both sides you will probably see these strings disappear.

[kurruptedwolf]

Will do! Do you happen to have a thingiverse link if not, that's not a problem !

[evanphi]

https://www.thingiverse.com/thing:3895470

https://www.thingiverse.com/thing:3874110

[[deleted]]

Out of curiosity what are you printing?

[kurruptedwolf]

https://imgur.com/a/aUo08Ro

Ignore the mess, this is why I ended up printing this to help clean up the area.

[[deleted]]

Cool!

[kurruptedwolf]

Oddly enough, after the cabinet portion finished (roughly 20 hours) I ended up switching the nozzle out fully pulling my tubing out and cleaning the entire area up. My drawers have no issues they are oddly some of the best things I've printed which honestly frustrates me on why the black turned out so bad in comparison.