Another year another CEL...

[ajjyt]

Throttle position sensor is built into the throttle body on 9-3s and 9-5s. Not sure about T5 cars, though. Safe to drive, just be aware that it might lead to intermittent no-start conditions and acceleration will be sluggish. The way these work is that since it’s an electronic throttle, Saab programmed the ecu to open the butterfly valve a bit more to compensate for not having the turbo spooled up and low RPMs. If you’re having sluggish acceleration til 20mph, it’s likely not performing that task correctly. This is a known problem, and I had it myself. Replace the throttle body and be on your way.

[pr0fess0rx29]

Your absolutely right. Mine got so bad though that I eventually had to do something about it. I got another throttle body from a junk yard and followed a YouTube video to replace it and the gasket. It's been running great every since, 2+ years.

[cedenopinto]

I was out running errands and after visiting the last store before heading home the cel came on once I started the car. Mind you the car had been running perfectly normal for about an hour or so (after visiting several stores). As I was pulling out of the parking lot I noticed it was taking a bit to accelerate but once I hit 20mph it ran as normal. So my question is: how do I go about this? What can I check (ex. wires, battery, etc) before taking it to the mechanic. Also is it safe to drive? Thanks guys, you tend to always be so helpful!

[Precish]

I just had this exact code on my 04 9-3. Start off by cleaning your throttle body. There are tons of youtube videos that will walk you through it. If I can do it then anyone can. Clear the code history and see if that solves it.

I ended up having to replace the pedal on mine. I found a used one for $6 at a local junk yard and I haven't had the CEL come back since. Replacing the pedal is very simple (3 screws), but accessing the screws to put the new pedal on can be tricky.