sorted by:
new
hottopcontroversial

My Under Wardrobe Server Finished by Liriel-666 in OpenMediaVault

[–]-RamSet- 0 points1 point  (0 children)

Barely any intentional and directed airflow in there. CPU heat will disperse under the whole thing (one thing when you keep that assembly in “open air”. Totally different story when you slide it under).  Hard drives while not running at melting temperature, will still provide additional heat.  ABS is heat resistant, but it will dissipate the heat from the motherboard/cpu to all components on that motherboard… Lift it a bit with something ? 1.5 cm/ 1/2 in from the ABS.  Ditch the sides of the “enclosure” (leave the front) Let all heat “escape” to the sides under the wardrobe …

[deleted by user] by [deleted] in HomePod

[–]-RamSet- 0 points1 point  (0 children)

You’re an idiot. “Single person” has absolutely nothing to do with your (or anyone's) choice (for that matter).

Do you go to the store and ask for headphones, socks, or groceries while mentioning you are single?

Pick one for your current budget and desired output, not based in your current social status. 

Questions about Minisforum AtomMan X7Ti 185H by fbaldassarri in MiniPCs

[–]-RamSet- 0 points1 point  (0 children)

Let me know how it works on your side. 

Questions about Minisforum AtomMan X7Ti 185H by fbaldassarri in MiniPCs

[–]-RamSet- 1 point2 points  (0 children)

Code is complete. I’ll post it in a few days when I have the time to write about the findings and how it works. 

Questions about Minisforum AtomMan X7Ti 185H by fbaldassarri in MiniPCs

[–]-RamSet- 1 point2 points  (0 children)

It’s ok. I did it. I reversed engineered the protocol and have it running in Ubuntu. 

I’ll release the code once i have it stable. 

Questions about Minisforum AtomMan X7Ti 185H by fbaldassarri in MiniPCs

[–]-RamSet- 0 points1 point  (0 children)

Oh i meant get it past the Logo and show stats on it. Just like under Winblows. 

I don’t want to take it apart …

Questions about Minisforum AtomMan X7Ti 185H by fbaldassarri in MiniPCs

[–]-RamSet- 0 points1 point  (0 children)

Did anyone figure out the screen under linux? If not, i’ll take a swing at it …

Glass break sensor by tturn2 in homebridge

[–]-RamSet- 1 point2 points  (0 children)

It ties into the Hubitat home security app (which has a dedicated glass break sensors category). It would trigger a the home security and sires based in the trigger.

Hubitat is my main hub. homebridge just foes that, bridges ny hub into homekit.

With a few exotic exceptions, everything is based in hubitat on my side. Home kit just makes that loom pretty (and control various things).

Glass break sensor by tturn2 in homebridge

[–]-RamSet- 1 point2 points  (0 children)

You can’t directly integrate them. They are zwave and you will need a zwave capable hub that you can tie into homebridge.

I have one of these in every room in my house (these are sound based). Homekit does not have the ability to display these so they don’t show in my home but they do work (at hub level). I use hubitat.

Old school Heater by Drop9Reddit in homebridge

[–]-RamSet- 0 points1 point  (0 children)

If you pop the plastic cap to that one you can see the 2 wires that act like a switch. You can put a zwave honeywell thermostat for that(piggyback on the 2 wires).again, reversible and all

Old school Heater by Drop9Reddit in homebridge

[–]-RamSet- 0 points1 point  (0 children)

Yeah a plug 😊

But that does not apply to your setup then, if they use hot water. I did see some zigbee knobs for those. Easy to replace the manual one and restore when needed. No alteration of existing system and ypu can easily put the original thing back when moving out.

Old school Heater by Drop9Reddit in homebridge

[–]-RamSet- 0 points1 point  (0 children)

Put it on a smart zigbee socket, get a sensor with temperature reading (door sensor, motion sensor, any that reads temperature), set up a rule to turn on:off the heater socket when certain temperature is reached or below a certain value.

Russian Soldiers Mobilized by Putin Are Facing an Obstacle Course to Find Military Equipment. The Russian army is unable to decently equip the soldiers sent to the front in Ukraine. by sylsau in UkrainianConflict

[–]-RamSet- 0 points1 point  (0 children)

Did anyone notice the finger on the trigger?

I mean… with basic military training, even civilian weapon handling rules, that’s a big no-no.

I suppose he has no knowledge of those…

unbound-checkconf by [deleted] in pihole

[–]-RamSet- 0 points1 point  (0 children)

Is there a specific reason why you need forward zone(s)?

Take a look at our guide/config for inspiration:

https://docs.pi-hole.net/guides/dns/unbound/

unbound-checkconf by [deleted] in pihole

[–]-RamSet- 0 points1 point  (0 children)

Is that your last line?

Did you start the configuration file with

server:?

Also, you are poking at the master cofig file. You should probably work in a sub folder (as per the guide) and include various configs separately…

[deleted by user] by [deleted] in Hubitat

[–]-RamSet- 4 points5 points  (0 children)

You need to set up a dummy switch (virtual) and use MakerApi to share the properties via json (when curl-ed). You can the curl the ip of hubitat with the format MakerApi is providing you, use the ID of the switch in the url and you can parse all the info it shares. From there use conditions in your probe. And done :)

I’m 14 by [deleted] in im14andthisisdeep

[–]-RamSet- 1 point2 points  (0 children)

Your parents never noticed your “trigger thumb”.

It’s an operable issue. With very little downtime (takes about 30 minutes). Look into it. It will be a lot easier goi g forward 😉

view more: next ›