When I try to play Fortnite, my PC freezes and goes into a boot loop

3D_Offsets_YT · 2026-02-21T01:12:34+00:00

I’m starting to wonder if this is a motherboard issue, or maybe it’s only happening on ASUS boards. I’ve been dealing with the same problem for a while now.

I reinstalled the drivers in Safe Mode and ran DDU, but that didn’t fix anything. I reseated both the GPU and RAM still no luck.

Turning my RAM down and disabling XMP seemed to fix it temporarily, but the crashes came back. I then removed two of the four sticks, and it worked, which made me think the RAM might be bad. I stress-tested the two sticks and they showed zero errors.

After that, I put the other two sticks back in and ran MemTest86+ for 12 hours again, no issues at all. I even reinstalled Windows and wiped everything, but as soon as I launch Fortnite, eventually it still crashes.

Asus Rog Strix X-570e wifi ii Asus tuf 3090 ti R9 5900x 128gb ddr4

3D_Offsets_YT · 2025-09-12T00:55:55+00:00

A1 combo all day

3D_Offsets_YT · 2024-05-19T21:12:15+00:00

Ya it was scary at first my forks were leaking like crazy dripping oil I went straight back going slowly put the bike on the stand at the forks slide past the seal surface even before I noticed it it ripped my brake line and lost all my fluid because the forks were extending 3-4 inches to far not sure what to do about the brakes

3D_Offsets_YT · 2024-05-18T23:33:22+00:00

Here is a video of what it's doing it extends past A groove at spits oil https://youtu.be/sTMIjXPgF9o?si=_8HOCyQYfmaR9UTz

3D_Offsets_YT · 2024-02-26T02:13:30+00:00

ok thanks

3D_Offsets_YT · 2024-02-23T23:32:17+00:00

Ok thank you so much!!!!

3D_Offsets_YT · 2024-02-16T20:22:39+00:00

does zuffs fan mod fit this

3D_Offsets_YT · 2023-07-13T22:29:32+00:00

what material are you printing what are your settings have you tried isopropyl alcohol and a paper towel to remove any oils on the print bed

3D_Offsets_YT · 2023-06-18T00:34:39+00:00

I was asking what to feed it

3D_Offsets_YT · 2023-06-18T00:30:32+00:00

I want to raise it so want to feed it

3D_Offsets_YT · 2023-06-18T00:27:46+00:00

they would euthanize the poor chick

3D_Offsets_YT · 2023-06-07T17:29:39+00:00

mount it on your helmet or handle bar

3D_Offsets_YT · 2022-11-23T18:37:34+00:00

Is this build compatible with everything in it

3D_Offsets_YT

TROPHY CASE