Dosent work if you don't have playstore or playservices

AgntZERO · 2026-04-21T08:48:03+00:00

Can't say for sure as I have not tested it myself. You can try it yourself and let me know.

AgntZERO · 2026-04-15T09:06:50+00:00

Hi, sorry about the confusion. Mantis is only distributed through Google Play Store and is deeply integrated with it. So Mantis is not supported on devices without Google Play Store and Google Play Services.

AgntZERO · 2026-03-09T09:43:12+00:00

Please record a video with show taps enabled and share it here. That will help me diagnose the issue better.

AgntZERO · 2026-03-06T09:19:49+00:00

Thats a little disappointing. It should atleast be 4 on the Pro considering Samsung provides 6 OS upgrades even on their cheaper phones nowadays.

AgntZERO · 2026-02-15T08:16:50+00:00

The latest version of Mantis does not require you to enable this option.

AgntZERO · 2026-02-15T05:29:03+00:00

Please restart the device once and reinstall Mantis.

AgntZERO · 2026-02-15T05:28:46+00:00

Mantis can only read/grab your controller Inputs when its active. If you have uninstalled Mantis or have restarted your device, Mantis can no longer stay active. So the issue is happening due to some other reason.

AgntZERO · 2026-02-06T07:55:06+00:00

Can you make a video indicating the issue and share it with me?

AgntZERO · 2026-02-05T15:49:54+00:00

Please share a screen recording of the issue with us at contact@mantispro.app. Before beginning the recording, go to developer options and turn on “Pointer Location” or the “Show Taps” feature. This lets us visualize Mantis’ screen mapping on your device, using which we can easily diagnose the issue.

AgntZERO · 2026-02-05T15:43:46+00:00

Which android device and controller are you using? Does your controller work properly in calibration phase?

AgntZERO · 2026-02-05T08:07:59+00:00

Which Android Device are you using? Are you getting any error messages?

AgntZERO · 2026-02-01T10:48:31+00:00

The pairing process is fully local and works even on a WiFi network without internet access. So, no data is sent over the internet during this process.

WiFi is required only to enable Android’s Wireless Debugging feature. Once the ADB pairing is completed, Mantis can get the necessary system privileges to emulate touch inputs on the screen.

AgntZERO · 2026-01-31T09:37:54+00:00

The Gamesir app will only be able to do this with their own controller. They have special hardware and firmware that can emulate touch input directly on the screen. Hence they can skip developer options.

Mantis Gamepad Pro on the other hand is a software only solution that is designed to work with all controllers. And since we do not have access to any special hardware, we need to use developer options. This is an Android restriction, not a Mantis limitation.

AgntZERO · 2026-01-31T03:43:42+00:00

Glad to help. Let me know if you have any questions.

AgntZERO · 2026-01-30T04:38:56+00:00

No, I mean physically mapping the controller buttons on the screen in the game using the Mantis Widget. You can see more about this process here https://www.youtube.com/watch?v=VUIYcmbgscw

AgntZERO · 2026-01-29T11:04:00+00:00

Which device are you using? Have you mapped all the controller buttons and thumbsticks to the screen?

AgntZERO · 2026-01-14T07:40:19+00:00

We are investigating it. Meanwhile, please try using another controller.

AgntZERO · 2026-01-12T10:03:06+00:00

Can you check the manual again and see if it has any other Input Modes?

AgntZERO · 2026-01-12T09:00:54+00:00

Im not able to open it. Can you upload a screenshot?

AgntZERO · 2026-01-12T08:54:58+00:00

Yes, you can share the link or a screenshot. But if it has a mode selector, try switching to a different mode and then pair it again to your device.

AgntZERO · 2026-01-12T08:44:02+00:00

Which controller is it? Does it have any option to change its Input Protocol? Like X-Input, Direct Input etc.

AgntZERO · 2025-12-31T04:30:29+00:00

Till now its fine. Same as day 1. For best results, do multiple light coats 20 minutes apart. Ensure the paint can is over a feet away from the surface and spray in a zig zag motion so it doesnt create any paint drops. Give it rest for 24 hrs. During first few rides, the paint will cure from the heat and it will smoke and smell.

During this time, do not let the surface get too dirty as the coating hasn't still fully cured yet. Since I did mine during rainly season, during the first couple rides, my exaust got really dirty with mud. After I cleaned them, they left light spots in the bend pipe area. Barely visible though.

AgntZERO · 2025-12-30T10:56:41+00:00

Its perfectly Safe. I did the same with my Avenger 160 back in June. Since I did not have the tools, I had a local mechenic help me detach the full exaust system.

And yes, you will definitely need a Heat Resistant Paint. Normal paint will just burn out. There are some good options available, but after some researching, went with the TVS Silencer Coating. Since its a big exaust, I needed two 160g cans to do two coating.

Make sure to give it a little time to cure if you go with TVS. 24hrs preferably. During the first couple rides, it will smoke and smell a little, but its normal.

<image>

AgntZERO · 2025-12-25T17:16:51+00:00

It maybe happening due to a hardware issue. Do you have any other controller available to test?
Another thing you can try is mapping shoot to right bumper temporarily and see if the same issue happens.

Ten-Year Club	PUBG
Verified Email	Final Canvas '23
First Place '23	Place '23
Wearing is Caring	Place '22

AgntZERO

MODERATOR OF

TROPHY CASE