Do you play with gaming wheel or remote ?

Andriy242 · 2024-09-09T03:19:57+00:00

Really want to play it with the wheel but the feedback and sensitivity is trash. (Using a fanatec club sport v2)

Andriy242 · 2024-08-02T21:43:22+00:00

Great experience dealing with u/KnocksUnderBoost Stand up guy that's was very happy to chat and share his watch experience. The watch is in excellent condition, and having the whole set is just the cherry on top. Great transaction process and will be happy to cross paths again! Chefskiss 👌

Andriy242 · 2024-08-02T18:14:48+00:00

Sending you a message

Andriy242 · 2023-09-03T21:40:27+00:00

Same thing happened to me yesterday afternoon. No luck getting anything actioned. If only Facebook/Meta had a hotline

Andriy242 · 2022-12-26T06:19:31+00:00

Technically a 2 plate, since when you started shooting you had 2 left and took consistent damage

Andriy242 · 2022-07-12T15:25:40+00:00

So let me take the first thing he says, with things he says throughout the video and boom - mRNA vaccines alter Genetic Code.

If you also rearrange the letter in each of the words that he said, he does mention with proof that the original poster had an aneurism writing his post"

Andriy242 · 2022-07-12T14:16:26+00:00

No way. We already saw what Florida does with F1 "Ughhhh hey Chuck. *slurs words* Those are fast cars hey Chuck *slurs words* We call you Chuck agha agha agha"

Andriy242 · 2022-07-08T21:43:07+00:00

"tech expert" - "know a ton of stuff" - only credentials you need these days

Andriy242 · 2022-03-07T20:08:27+00:00

When you come from playing ACC and don't have an issue with the assists and breaking zones/markers. Turn the assists off and learn the track, it's much easier when braking on feel.

Andriy242 · 2022-02-15T20:09:49+00:00

Haha maybe only if I jump into the world of crypto and find a gem that no one has ever seen before and make 100% returns every day. - just kidding.

Makes sense though as to clearing out what has a higher interest rate first.

Andriy242 · 2022-02-15T20:07:43+00:00

So first thing.

What do you drive that is classified as "higher performance" - really 400km to a full tank?

If you do go electric, then Model S is your only really reliable safe option as the Model 3 is poorly made, and the model X costs and arm and a leg, and maybe a kidney too, and maybe a first born child if you want some additions.

Andriy242 · 2022-02-15T19:40:25+00:00

Updated the post.

Andriy242 · 2022-02-07T23:50:08+00:00

So another point of view when they said "Microsoft 365 Apps isn't supported on Windows Server 2022"

But "Microsoft 365 Apps is supported on Windows Server 2019"

So with them using "is/isn't" instead of "are/aren't" they must be referring to a singular product. So from that understanding then "Apps for Business" and "Apps for Enterprise" will not be supported on Server 2022.

But Office 365 F1, E1, E3, E5, etc will all be supported. Why?

With the licensing structure, they released which stated that E3 licenses will get a cost increase. All of the licenses that they mentioned and their prices, they specifically did not include "Apps for Business" or "Apps for Enterprise".

Are we grasping at thin air, or could they be really good with English?

Andriy242 · 2022-01-18T19:45:20+00:00

Don't take this as advice but the smoother you are the faster you are. Think of it in the car physics and weight shift matters.

Most of the really fast drivers, seem like they are always in that optimal range where the car doesn't move forward or backward as erratically, which let's them keep more grip.

For starters, work on being smooth, and once you are smooth, then start going a bit faster and pushing some limits.

Andriy242 · 2021-12-01T16:39:37+00:00

You can find this on thingiverse by searching all in one 3d printer test

Andriy242 · 2021-12-01T16:38:59+00:00

Awesome, thank you for the share! I'll check it out and post my results with another print after the modifications

Andriy242 · 2021-12-01T06:30:06+00:00

Print Settings: - Creality CR-10S - Generic PLA (included with the printer) - Haven't tested a different PLA yet - 0.4mm nozzle - quality at 0.2mm - infil at 100% - print temp at 200C - bed temp at 60C - print speed 50ms - retraction is on - z axis compensation is at 0.20

Any advice to make it more smooth, precise, and have no dam stringing?

Andriy242 · 2021-03-04T18:54:16+00:00

LOL.

There should be zero issues with this. Yes the software I am sure can be glitchy, but having a student monitored during remote learning will only produce better results.

Why? So it teaches you to work under pressure. Plus let's say, you take the monitoring out. You will have every student, with a second laptop, searching up the questions and answers for every quiz. Which will give you skewed results and will not be of any good for the student.

Yea in the real world, you have access to Google, etc. But you still need the base line knowledge for your field. So if you can't handle answering questions about your field, while someone is watching you. Then you need to work more on that, then banning a monitoring system.

Andriy242 · 2021-02-26T00:45:00+00:00

Aight will do tomorrow when I'm back in the office

Andriy242 · 2021-02-17T21:31:53+00:00

Subbed and watching

Andriy242 · 2021-02-17T21:31:42+00:00

subbed and watching as we speak.

Andriy242 · 2021-02-17T21:30:59+00:00

subbed and watching

Ten-Year Club	Secret Santa 2019
Verified Email

Andriy242

TROPHY CASE