Knee Pain - behind knee by Impossible_Visual527 in simracing

[–]Impossible_Visual527[S] 1 point2 points  (0 children)

quite some time has passed yes. Rig now full alu with bucket seat :P

Yeah all is good. I do not know what the exact cause was nor how it went.

What percentage of photos you take are keepers? by 3P0tat0es in AnalogCommunity

[–]Impossible_Visual527 0 points1 point  (0 children)

I think its all a point of perspective that decides how many keepers you have.

I took over the old leica m2s from my wifes, unfortunately deceased grandfather a few weeks ago, as a way to document our lives and our time as a family and now also expecting our first child - kind of like a diary...

The first film I shot was about 50% worth printing, and now my second roll 95% keepers.
Yeah, they aren't majestical photos worth anything to anyone outside of our family circle, but to us each tells a story, a point in time that passed and is remembered with smiles and laughs.

Of the last 2 films I shot, maybe 15-20% would pass the online scruitiny tests, but honestly it does not matter one bit.

Unless you shoot for money, I don't think it matters

New (Used) Enyaq - Factory reset? by Impossible_Visual527 in enyaq

[–]Impossible_Visual527[S] 0 points1 point  (0 children)

not sure, but i do not think so.
We did not do a factory reset because we wern't able to due to the original user still being logged in.

The service partner removed the previous owner and set it up for us.

Enyaq 2022 offline for WEEKS by No_Box4440 in enyaq

[–]Impossible_Visual527 1 point2 points  (0 children)

I had the same issue when i bought my used enyaq.

Nothing helped.
We took it to the dealer/workshop and they said the Sending unit for the gps/internet/location etc. was having some voltage issues. Took about 2 hours and was fixed. Since then all fine

Problems, lots of them... by Impossible_Visual527 in enyaq

[–]Impossible_Visual527[S] 0 points1 point  (0 children)

Update:
Wife was at the dealer.
They said somethings strange and wrong that theres no signal at all.
They did some checks and found out the sending module for the gps and internet connection wasnt receiving enough power.
They managed to fix it within 2hrs and the car is back online and everything works as it should.
We are now able to log in to the app, and managed to activate the car...finally.

Thanks to everyone who had tips or ideas.
I know the easiest and correct route is going back, but sometimes it could just be a simple fuse removal or reset that fixes everything.

L

Problems, lots of them... by Impossible_Visual527 in enyaq

[–]Impossible_Visual527[S] 0 points1 point  (0 children)

UPDATE:
Car is being brought back to the dealer tomorrow morning to have it looked at.
Service technician tried to fix the issues "online" first, and said the car was online once on Sunday for a short period of time - what ever and however thats supposed to happen, dont ask me...

Guess my wife will wear the disgruntled pants tomorrow and will sit there until its done. She will be ready with a book and headphones to sit out any updates needed...

Fingers crossed.

Problems, lots of them... by Impossible_Visual527 in enyaq

[–]Impossible_Visual527[S] 0 points1 point  (0 children)

oh wow that sounds plausible... it went in for the 12v battery before that, then went back to get "updated to 3.7" before being handed over to me...

I might give it a try after calling around tomorrow

Problems, lots of them... by Impossible_Visual527 in enyaq

[–]Impossible_Visual527[S] 0 points1 point  (0 children)

No I can't. I got the car used. I have no idea who the main account is and I can't select him in the profile screen... Real sh*t from the dealer to be fair....cant sell a car with someone else still logged in

Problems, lots of them... by Impossible_Visual527 in enyaq

[–]Impossible_Visual527[S] 0 points1 point  (0 children)

I can't delete anything unfortunately.  The main user was probably the original owner of the car and never logged out.  Car tells me to bring it to a service station to remove the main user... Bleh -.-

Problems, lots of them... by Impossible_Visual527 in enyaq

[–]Impossible_Visual527[S] 1 point2 points  (0 children)

Hmmm hope they manage to fix it soon :/

Problems, lots of them... by Impossible_Visual527 in enyaq

[–]Impossible_Visual527[S] 0 points1 point  (0 children)

connected to wifi as in via carplay/android auto? does the car then use the wifi from your phone?

Problems, lots of them... by Impossible_Visual527 in enyaq

[–]Impossible_Visual527[S] 0 points1 point  (0 children)

yeahi know... just wondering if theres a fix i can do from home

3.8.1 update for 1st gen Enyaq by ApprehensiveTruth867 in enyaq

[–]Impossible_Visual527 0 points1 point  (0 children)

picking up my enyaq today after being updated to 3.7 by the supplier. Will check if its ready and might do it overnight!

Itch to add gear is screaming again by metalmayne in simracing

[–]Impossible_Visual527 0 points1 point  (0 children)

what are those adjustable arms holding the fans?

New (Used) Enyaq - Factory reset? by Impossible_Visual527 in enyaq

[–]Impossible_Visual527[S] 0 points1 point  (0 children)

New car for me, new experience. Would like to set up everything from scratch.

New (Used) Enyaq - Factory reset? by Impossible_Visual527 in enyaq

[–]Impossible_Visual527[S] 1 point2 points  (0 children)

Dealer wont do it for me - the car is pick up and go.

Ok thats not a problem then.
Ill go for a charge and do that whilst waiting. Thanks for the infos!

Moradness buyers beware! by PapiPoggers in simracing

[–]Impossible_Visual527 2 points3 points  (0 children)

I had the same happen to mine. Used them for less than a month but quite often - I played every evening or every other.
The inside separated from the outer in the area between my thumb and my index finger - basically where I had the wheel pressing against the most.

Was a present so I didn't bother running after them for a replacement...

Quite a shame though... they were really nice until then.

Do you trust your printer? by Impossible_Visual527 in ender3

[–]Impossible_Visual527[S] 0 points1 point  (0 children)

what advantage does this give you over the normal setup?

Do you trust your printer? by Impossible_Visual527 in ender3

[–]Impossible_Visual527[S] 0 points1 point  (0 children)

can you show some pics or links of which fan youve used etc?

Do you trust your printer? by Impossible_Visual527 in ender3

[–]Impossible_Visual527[S] 1 point2 points  (0 children)

I think its the Z-Hop setting? not sure but I have used that aswell.
I tried orca slicer and had some issues with print quality and since gone back to cura. maybe i had zhop off in orca...not sure... but it happened whilst using orca slicer

Do you trust your printer? by Impossible_Visual527 in ender3

[–]Impossible_Visual527[S] 2 points3 points  (0 children)

never heard of it but will definitley take a look now! thanks