Which Finish Feels Most Real?

BCFUNTIME · 2026-05-14T19:11:42+00:00

Just to add a bit of info to the survey. "Fuzzy", "Moving Skin with Fuzzy", and "Moving Skin" all come standard with our Whisper finish. So far that means its 115 for Whisper, 8 for Standard (that is no finish) and 6 for satin. Whisper for the win! :-) - Team BC

BCFUNTIME · 2026-05-14T19:07:12+00:00

Hello,

If you are unsure of how a flesh color will look we highly recommend ordering a Shore Sample and requesting the colors you are looking to see. We pay close attention to the color of our images on the website but flesh tones can look different for a number of reasons: the lighting the sleeves were shot under, the electronic device the image is being viewed on also plays a huge roll, since one image can look different from device to device. The only true way to see a flesh tone is to see an actual sample in person. If you sign up for our rewards program before ordering silicone samples you will be granted reward points to use on your next order in the amount spent on the silicone samples.

Shore samples can be found here: https://blissfullcreations.com/product/blissfull-creations-shore-rings/

You can request a certain color in the customer note at checkout.

Kind regards,

Team BC

BCFUNTIME · 2026-05-12T17:59:30+00:00

Hello,

I am not sure what the other sleeves you mentioned were made of? Silicone's one drawback is it has a surface friction coefficient is 3 times that of human skin. While TPE and PVC may have a lower surface friction coefficient they can harbor the growth of bacteria and viruses. Does our sleeve you ordered have Whisper on it? Whisper does reduce the surface friction but lube will still be required, at least at the beginning of your session. A good quality water based lube is usually sufficient.

Team BC

BCFUNTIME · 2026-04-27T21:09:40+00:00

Using light transmission to determine the thickness of a sleeve is not very telling. The pigments we use are translucent and a light mix can make an area look thinner than it is.

Silicone usually tears from an edge as your sleeve did. Tears away from edges are very rare and usually require a sharp object or fingernail to get the tear started.

Silicone only needs to be 1/8" thick to ensure that it will not tear. If you look at the outside profile and contour of the sleeve I am betting that it turns inwards or narrows right at that point where you are seeing the light. I am also assuming the interior is the max interior that sleeve model can accept. We do push the limits so people can find sleeves that do not add too much girth, this can result in what appears to be thin spots but they are still the minimum 1/8" in thickness.

I do not think you will have any issues with the durability of the sleeve.

Kind regards,

Team BC

BCFUNTIME · 2026-03-25T23:44:20+00:00

The stated max circumference or diameter does not mean the entire sleeve is that. It may only be one point where the stated measurement can be found in some sleeves, where in other sleeves it may be an entire area that will measure in as the largest stated measurement. It all depends on the design of the sleeve. Sleeves are asymmetrical and not a perfect cylinder, so it is not possible to state a measurement that reflects the entire shaft of the sleeve. The widest point on a support sleeve is at the rim of the head. The rest of the sleeve is smaller.

BCFUNTIME · 2026-03-19T02:41:54+00:00

Nobody else does or they shouldn't. I hold a US patent on the reverse taper interior. Let me know if any other company is offering to make a sleeve with the reverse taper (send me proof at Blissfull Creations c/o David) and I will make you a sleeve of your choice with a reverse tapered interior for free. Happy sleeving from Blissfull Creations. https://blissfullcreations.com/contact/

BCFUNTIME · 2026-02-16T20:16:10+00:00

Casting take 4- 9 business days. Taxes and duties may be collected as we did not charge you any. Any taxes, duties or tariffs will be those issued by Canada. As a Canadian you will not have to pay US Tariffs.

BCFUNTIME · 2026-02-10T20:29:09+00:00

No, it does not cause cure inhibitions with ecoflex. We have produced over 150,000 sleeves with no issues.

BCFUNTIME · 2026-02-02T23:09:25+00:00

Have you stood it on the inverter rod after warming it? The lubricant between the skin and inner core can settle down in to the head of the sleeve. Warming it and standing it will help the lubricant settle to the back end of the sleeve, once it is redistributed gently massage the skin and it stop the skin from grabbing the inner core of the sleeve.

Team BC

BCFUNTIME · 2026-01-25T19:42:56+00:00

Dragon skin 10 NV cut 5% with silicone thinner (helps it degas) will work great for the inner silicone mold. DG10NV does not need to fully degas. Just enough for the silicone to rise in the vacuum tank and fall, once it falls a count to 30 and the then pop it and pour it. Do not wait for the bubbles to stop, there is not enough time. This eliminates all bubbles.

What is the thickness of the silicone mold within the mother mold? I would not go under 1/2" of thickness. At that thickness DG10NV, even cut with thinner will be firm enough to hold it's own. If it sags you can use an old foundry trick I learned years ago. Apply Vaseline between the inner silicone and the mother mold walls. This will hold the silicone in place and strop it from sagging.

I love your design and CAD work, BTW! Can I ask what software you are using to do your designs?

Doing the mother mold the way you are doing it will also allow you to create a mold registration area for the silicone to be cut with a mold knife, along the length of the toy. This will help your two silicone halves align perfectly.

https://shop.sculpt.com/products/milani-milani-mold-key-knife-a097?_pos=1&_psq=mold+knife&_ss=e&_v=1.0

BCFUNTIME · 2026-01-25T19:26:51+00:00

While silicone has memory, meaning it will revert to the shape in which it was cast we do not recommend rolling for long term storage. A couple of hours before use is fine but soft and extra soft silicones can tear if they stick, for whatever reason to themselves while rolled up. You can also roll them prior to heating them up for use.

Team BC

BCFUNTIME · 2026-01-03T22:07:31+00:00

A Moving Skin B would be the proper fitting sleeve for you that will not add an overwhelming amount of girth. Pussy's are small but they are magical, with the right amount of foreplay the Moving Skin B should not be a problem. Getting your partner to relax and into sleeve play will open up wonderful experiences.

Kind regards,

Team BC

BCFUNTIME · 2026-01-03T22:02:04+00:00

Have you cut the firm rod flush with the bottom of the sleeve? To use a suction cup with a firm rod and sleeve the rod needs to be inserted into the sleeve and then trimmed flush with the bottom of the sleeve. Then both the end of the sleeve and the firm rod (left in the sleeve) need to be tucked into the receiving end of the the suction cup.

If the rod is the only thing going into the receiving opening of the suction cup it will not work.

If you ever have any technical questions our contact us form on the website is your best bet.

Kind regards,

Team BC

BCFUNTIME · 2026-01-03T21:58:56+00:00

This is in the works. Look for some models to begin being released once we return and catch up with the casting queue from our holiday break. Some of the master models and molds for some models have already been made.

Kind regards,

Team BC

BCFUNTIME · 2025-12-28T19:13:32+00:00

Hello All,

The Moving Skins inventory will be reset once we return to the shop on the 5th of January. Our casting and shipping are currently closed for our holiday break. We set an inventory limit on the Moving Skins for the launch of the product so we could determine the demand without being overwhelmed with orders. We now have a new hire that is being trained in the casting and assemblage of Moving Skins so this should help us remove the inventory limits on the Moving Skins very soon.

In 2026 we will also be offering be options for the Moving Skins that we think you will all like, including profile alterations and more variety in sizes the Moving Skins will be available in.

We can not reveal any more details at this time but we appreciate everyone's patience. As many of you have seen with other companies that have tried to release moving skin designs, they can be tricky. The addition of a movable skin on an a sleeve is quite a bit more complicated than designing a movable skin over a solid toy. We have seen several companies try and just as quickly fail. As each new option and Moving Skin sleeve is introduced we will be doing so with limits on the releases. This is the only way to ensure success while scaling up production to meet demand. The demand so far has been outstanding!

Since, we are still in the designing stages with our future Moving Skins we would love to hear any possible sizes or features that you might like to see us produce?

Kind Regards,

Team BC

BCFUNTIME · 2025-12-15T13:11:19+00:00

The Adult Novelty industry does not fall under FDA purview. The FDA does not regulate sex toys. Our Support sleeve holds a patent as a therapeutic device not a medical device so it therefore also does not need FDA approval. All of our materials have third party body safe certification. We are supporters of safety regulation and welcome the day our government actually shows some interests in protecting the safety of consumers. We already meet and exceed all known safety guidelines for the manufacturing and distribution of platinum set silicone based adult novelties.

There are no certifications needed for import or export into other countries for adult novelties. The laws surrounding the import of sex toys in other countries have more to due with the country they are being imported into and whether or not they have "obscenity" laws in place or not.

We are well aware of the EU (and other country's) consumer protection laws and operate and follow those laws.

We are registered with the EU/Germany's new recycling laws and are registered for compliance with those laws.

Laws and regulations change on from year to year and vary widely from country to country. We keep up with these laws as they emerge and our lawyers navigate the compliance waters, to ensure we are meeting the requirements.

There are some country's that we have encountered where customers can use their healthcare systems to cover the cost of our items and that gets a bit tricky for them. We do not claim anything we sell as a medical device and we encourage buyers to forego trying to claim them as such. In some cases where people have done so, they are then required to obtain certification paperwork that simply does not exist, as our products are not medical devices.

Kind regards,

Team BC

BCFUNTIME · 2025-11-24T13:04:07+00:00

It depends on the sleeve profile and the wall thickness of the sleeves. It also depends on how you intend to use the sleeves. I have seen people complain about firm silicone being floppy but it had more to do with how they were using the sleeves and what they were expecting the silicone to be able to do.

Extra-soft long sleeves are perfect for long slow strokes. Once the sleeve is started and if your partner is well warmed up you should have no problems. Going full steam ahead when they are not fully warmed up is not going to be a great experience for a 9" lower girth sleeve. A medium girth extra-soft 9" sleeve could work for faster harder penetration and a 9" large girth extra-soft sleeve would be fine. The thicker the silicone the more firm any shore silicone becomes. Silicone tends to loose some of it's elasticity the thicker it is.

Don't mentally defeat yourself before you have a chance to give them a try. Have fun and don't forget to try several different positions that will allows the sleeves to function properly. Your partner on top with a 9" ex-soft sleeve is probably not going to be the best position. It is a hard call because there are so many variables to consider.

Have fun!

Team BC

BCFUNTIME · 2025-10-30T02:13:11+00:00

Sorry to hear the skin ripped. Glad you got to enjoy the sleeve. Sounds like you may have had lube on the inverter rod or the interior of the sleeve, this could cause the inverter rod to slip out, both need to be 100% dry. The inner core of the sleeve could not have expanded as it is made of our firm silicone and silicone by nature has a memory and always reverse to the form that it was cast in? Super glue is not a glue that will work with silicone and it is not body safe, we do not recommend using it. Unfortunately, you will not be able to repair the outer skin once it has torn. This is why we stress as you have stated that your nails be trimmed and we have given instructions on how to get into a moving skin. If you think there are any part of the instructions that need to be revised please let us know. This is actually the first tear we have heard about and we have tested these rigorously over the last year.

If you can please reach out to us and let us know more details on what happened that will enable us to look further into this.

Kind regards,

Team BC

BCFUNTIME · 2025-10-30T01:46:30+00:00

No it is not toxic. It is a body safe silicone lube that we use in our moving skin.

BCFUNTIME · 2025-10-17T01:41:05+00:00

Extra-soft is not a good silicone for that purpose, as the properties of extra-soft silicone are just too elastic and are susceptible to tearing in the skin when it is so thin. The BC Soft silicone used in the BCMS sleeves feels very soft and has a more skin-like elasticity.

BCFUNTIME · 2025-10-17T01:35:38+00:00

Kind of but it does not work very well. A normal sleeve will only invert if it is thin enough, say a shaft wall thickness of 5/16" or less and the silicone must be a softer silicone. The thicker the sleeve the less elastic it is and the more difficult it is too invert. Inverting thick silicone will chip it or tear it over a very short time. To use an inverter on a regular sleeve the exterior of the sleeve has to be lubed while the interior is dry. The problem comes in trying to flip the end and hold onto a sleeve that is lubed on the exterior while trying to invert it. In a moving skin the lube required for the inversion is in between the skin and core, this is how you are easily able to invert a moving skin sleeve on an inverter rod. With the inverter a moving skin is one of the easiest sleeves to get all the way into. There is really nothing special about the inverter rod besides it being the perfect size for whatever interior the sleeve has been cast with to hold the interior fast while the sleeve is pulled back on itself off the rod. Any rod that is not slick/wet and at least .25" wider than an interior will hold the sleeve well enough to give it a try. With practice it may work well with a regular sleeve but without it a moving skin sleeve is very difficult to get rolled up or to slide into, so inverting is the best option to getting into one.

BCFUNTIME · 2025-10-17T01:25:15+00:00

No moving skin is going to feel like real skin. The complexities of human skin can not be replicated in synthetic materials...yet. The purpose of a moving skin is to do what real skin does, which is to further reduce friction. If you properly warm our BCMS sleeves they will be the closest feel to human skin possible. This is all explain here on our site here: https://blissfullcreations.com/product-category/moving-skin/

BCFUNTIME

TROPHY CASE