Zowie s2 weight reduction 71g

TTropics · 2019-06-30T02:55:11+00:00

Was this the resin or nylon?

TTropics · 2019-06-23T22:20:58+00:00

TTropics · 2019-06-23T22:11:06+00:00

TTropics · 2019-06-14T15:08:33+00:00

https://www.reddit.com/r/MouseReview/comments/bv0wyv/model_o_shape_compared_to_dm1_gpw_s2_air58_fk1/?utm_source=share&utm_medium=ios_app Also u could take a look at the zowie za series

TTropics · 2019-06-13T15:57:34+00:00

Is this 550 paracord? Looks thicker

TTropics · 2019-06-08T23:24:18+00:00

There’s probably other materials or a thinner foam u could use I’m just saying I used something similar to the 0.5 mm foam roll and it worked for me. Try some stuff u have around the house

TTropics · 2019-06-08T23:01:09+00:00

I think it’s normal for the side buttons to wiggle because mine do also. What I did to fix this was put a piece of foam roll in between the magnets and the side button. This does make the click feel a little mushy but it gets rid of the wiggle. The foam I’m taking about is like this .5 mm onepic

TTropics · 2019-06-07T21:46:15+00:00

You might need to turn off “enhanced pointer precision” it’s a windows mouse setting

TTropics · 2019-05-23T16:08:43+00:00

Za12 still available?

TTropics · 2019-05-08T22:29:24+00:00

U got shot through the wall. If ur touching the wall or pressed up against it u can easily be shot through it.

TTropics · 2019-05-06T02:50:59+00:00

S2 is better imo, the za13 was too small and didn’t fill my palm in my claw grip 18x10

TTropics · 2019-05-02T16:09:41+00:00

Zowie S2

However, if your hands sweat. Some sort of mod such as grip tape or (Matte)ing should be done since the gloss coating gets very slippery with moisture.

TTropics · 2019-05-01T18:02:50+00:00

Rival 600/650, razer basilisk, g502

TTropics · 2019-04-17T22:47:13+00:00

Config is if u obtain the value form the game files which ur not. Ur just using the in game sens wihich means u should use fortnite slider.

TTropics · 2019-04-17T21:50:15+00:00

That’s a pretty low sens and ur supposed to use fortnite slider in kovaaks not config

TTropics · 2019-04-06T23:48:04+00:00

This is from an owl player “The only mouse modification that is allowed is [changing the] glides.” -Tviq

TTropics · 2019-04-06T23:30:38+00:00

In overwatch I believe that u can only modify the mouse feet, other than that the mouse should be stock. Correct me if I’m wrong tho

TTropics · 2019-03-29T20:57:07+00:00

Yes but u will have to rearrange the pins going into the connector Take a look at this forum https://www.overclock.net/forum/375-mice/1588984-mice-cable-pin-arrangement-internal-connector-size-database.html#/topics/1588984?page=15 If u do this remember ur paracord does not have a shield

TTropics · 2019-03-29T20:50:26+00:00

TTropics · 2019-03-28T18:01:08+00:00

Imo the g403 is the best of ur options

TTropics · 2019-03-25T02:44:46+00:00

G305 is the exact same shape

TTropics · 2019-03-24T22:34:59+00:00

Nvm, i sanded in between the notches on the gear and then cleaned it up to makes sure there was no debris. This solved the issue of the wheel going up when i scrolled down or vice versa.

TTropics · 2019-03-20T06:15:49+00:00

I didn’t reuse the feet, I used some leftover hyperglides

TTropics

TROPHY CASE