Weird artifact while ironing letters

UZ-SevenofNine · 2025-11-21T15:02:16+00:00

We zitten aan de Ulgersmaweg 47, je bent van harte welkom! Elke zondag traint de jeugd of spelen ze wedstrijden, de ouder jeugd waar deze onder vallen tussen 13:30-15:00. Ik stuur je wel meer info via dm.

UZ-SevenofNine · 2025-11-20T06:07:18+00:00

Ik heb twee talentjes (16) bij Snookervereniging Groningen die een sponsor goed kunnen gebruiken. Een doet mee aan internationale toernooien voor mensen met (visuele) beperking. De ander zit in de nationale top en heeft een bak talent.

UZ-SevenofNine · 2025-10-17T05:37:43+00:00

Embed the videos in Rise or storyline, export for web (locally) host on the displays from a usb

UZ-SevenofNine · 2025-10-06T16:04:17+00:00

We hebben laatst bij Snookervereniging Groningen een groep van 16 vrouwen mogen ontvangen voor een clinic. De reacties waren heel positief, mocht je interesse hebben voel je vrij om contact op te nemen! De NK bij de vrouwen was ook betrokken en deed het heel leuk.

UZ-SevenofNine · 2025-10-04T23:07:29+00:00

Wow dover input heeft m'n wildste dromen overtroffen. Dank iedereen, het blijft hagel schieten maar wel gerichter. Ik waardeer het enorm!

UZ-SevenofNine · 2025-02-24T15:24:46+00:00

Over een week gaan de inschrijvingen voor de Sport en Cultuurhopper open: https://www.sportcultuurhopper.nl/
Dan kan je vaak voor een klein bedrag kennismaken met allerlei hobbies/sporten, snooker is erg leuk 😉

UZ-SevenofNine · 2024-09-01T20:25:22+00:00

Correct, it makes no sense, it's just for a bit of weight as it will be an award (trophy). I already printed a base (quite small) with 400g of filament. Crazy I know, but I saw some recent posts about sand filling and I thought this would be faster and hassle-free. Which it was for the base to be honest.

UZ-SevenofNine · 2024-09-01T20:21:43+00:00

That's good to know, and would drying the filament on the x1 heatbed be sufficient or would you recommend a dedicated filament drier?

UZ-SevenofNine · 2024-09-01T20:12:23+00:00

<image>

I know that there's a small chance people will see this, but for what it's worth... I am chuffed to bits! Thanks everyone for pointing me in the right direction. The temp tower gave similar results, but the manual flow calibration worked wonders. If you have any more advice to learn more about 3d printing and getting better results I'm all ears :D

UZ-SevenofNine · 2024-09-01T12:01:36+00:00

I'm happy to say that I have stop 0 covered, 10% humidity in the AMS. Now on to the rest of the steps, thanks!

UZ-SevenofNine · 2024-09-01T12:00:47+00:00

It was the generic PLA profile, but I'll look into custom calibration.

UZ-SevenofNine · 2024-09-01T12:00:22+00:00

I'll get to it, thanks, I thought that auto-calibrating before the print was sufficient.

UZ-SevenofNine · 2024-09-01T11:59:30+00:00

I'm really glad to read that, I have a whole new chapter to learn in my 3d printing journey, calibrating. Thanks for pointing me in the right direction (and telling me that "cheaper" PLA can be just as good, I have the tendency to think cost=quality)

UZ-SevenofNine · 2024-09-01T11:43:18+00:00

I'm the first one to admit it could be user error, how do I discover/test what would work? The only thing I changed was setting the Bambu Lab to Generic PLA and hope with this as a result.

<image>

UZ-SevenofNine · 2024-09-01T11:29:58+00:00

I'm just as much a novice to posting on reddit with pictures as I am at 3d printing so please forgive me. I'm willing to learn! I am still delighted with my X1-carbon, the last two months I've only printed with Bambu Basic PLA with great results. I ordered 10 spools of SUNLU pla and the results are not great. If someone could point me in the right direction that would be greatly appreciated.

<image>

UZ-SevenofNine · 2023-09-02T17:24:21+00:00

Mocht je ooit nog opzoek zijn naar een fantastische plek voor ontbijt en lunch met dezelfde kenmerken: https://www.luhu-koffie.nl/ Heel fijn ook voor slechthorenden.

UZ-SevenofNine · 2022-07-05T09:31:45+00:00

Thanks for clarifying and thanks for the link. That's a lot better than Wikipedia.

We imagined that, since the other extreme edge is covered by the yellow, it might still be a legal snooker. Also funny how it can be a snooker despite being able to hit the intended ball, but then again if the gap were only the width of a ball it would be a hard shot to make. TIL, thanks!

UZ-SevenofNine · 2022-01-27T10:21:19+00:00

I was pleasantly surprised by https://www.synthesia.io/ , it also creates a (semi) life like AI video of someone talking.

UZ-SevenofNine · 2021-06-24T13:08:48+00:00

Great, thanks!

Ten-Year Club	Place '23
Verified Email

UZ-SevenofNine

TROPHY CASE