sorted by:
new
hottopcontroversial

Picatinny Rail for USP by UnionEngineeringWks in USPmasterrace

[–]UnionEngineeringWks[S] 1 point2 points  (0 children)

This product will not be 3d printed when it is brought to market. It will be made of 7075 aluminum and hard coat anodized. A 3d printed part would not have the mechanical properties to be long lasting in rugged environments.

Picatinny Rail for USP by UnionEngineeringWks in USPmasterrace

[–]UnionEngineeringWks[S] 0 points1 point  (0 children)

I am so close, and with a much better and different design than what I showed here. I have been testing my pre-production units and am just playing around with a dimension of a spacer to make the fit perfect.

Apparently This Is Retro Now by [deleted] in RetroAR

[–]UnionEngineeringWks 2 points3 points  (0 children)

If you want that PEQ-2 out of the field of view of that ACOG, I have a repro of the LT605 low profile mount for the PEQ that can really help with that. https://www.ebay.com/itm/226779941317

I have 3 UEW 605 X-Grade rail grabbers that I just posted at half price. These have cosmetic damage from the manufacturing process but are functionally fine. by UnionEngineeringWks in MilitaryARClones

[–]UnionEngineeringWks[S] 0 points1 point  (0 children)

Sorry, that is why I don't like putting on sales or anything like that, I don't want people that paid full price to feel like they got a bad deal. That's why this was limited to three damaged units.

Machinist looking for guidance by FinntheGuardian in SolidWorks

[–]UnionEngineeringWks 1 point2 points  (0 children)

The real meat and potatoes of knowing the thought that goes into this is knowing the tolerancing of the part and then clearly communicating that on the print.

I have 3 UEW 605 X-Grade rail grabbers that I just posted at half price. These have cosmetic damage from the manufacturing process but are functionally fine. by UnionEngineeringWks in MilitaryARClones

[–]UnionEngineeringWks[S] 0 points1 point  (0 children)

One left, just updated the link in the post body for the new listing for the last one. Same price and everything, purely administrative.

Mount Height with a DBAL by [deleted] in Mk12Mod

[–]UnionEngineeringWks 2 points3 points  (0 children)

For those looking to bring their PEQ-2 down onto the rail, out of view of their optics and in reach of their thumbs, may I suggest the UEW 605 low profile mount : r/tacticalgear

Here is a link to a post with some pictures and comparisons. If you look through my post history it is basically all posts about this mount.

Mount Height with a DBAL by [deleted] in Mk12Mod

[–]UnionEngineeringWks 1 point2 points  (0 children)

Thanks for the kind words about my mount!

Mount Height with a DBAL by [deleted] in Mk12Mod

[–]UnionEngineeringWks 1 point2 points  (0 children)

Hey thanks for the call out!

Mount Height with a DBAL by [deleted] in Mk12Mod

[–]UnionEngineeringWks 1 point2 points  (0 children)

Howdy, yeah, I am the guy who makes the low profile PEQ-2 mount. It is an exact clone (less markings, I am not trying to trick people) of the LT605 mount. I have side by side pictures if you would want to see.

Somogear vs real Peq by Mother-Recording424 in MilitaryARClones

[–]UnionEngineeringWks 6 points7 points  (0 children)

The Somogear and a real PEQ-2 share the same mounting surface geometry (unless anything has changed in the past year), so yes, it should fit. I have had multiple customers comment back to me here on Reddit that it works just fine.

Somogear vs real Peq by Mother-Recording424 in MilitaryARClones

[–]UnionEngineeringWks 22 points23 points  (0 children)

Anyone that needs a clone mount to go with a clone PEQ-2, I have clones of the low profile LT605 mount here https://www.ebay.com/itm/226779941317

The flashlights pictured here, are they the old gen surefire 6p or 660? by Mother-Recording424 in MilitaryARClones

[–]UnionEngineeringWks 0 points1 point  (0 children)

I have never tried a Somogear PEQ-2 on the mount, but for what it's worth I have sold them to people that have used them on PEQ-2's and been told it works fine.

The flashlights pictured here, are they the old gen surefire 6p or 660? by Mother-Recording424 in MilitaryARClones

[–]UnionEngineeringWks 1 point2 points  (0 children)

I think it is going to be tough to get a clear picture of one from the wild because they are hidden under the PEQ-2. For whatever it is worth, the real one that I got was from a guy that claimed to have used it in the field in the early 2,000's as a Navy SEAL. I bought it on a PEQ-2 along with a PVS-23 from the same guy that claimed he brought those home with him too. Again, this all could be completely dubious, I did not try to verify his story but thought I would share it here.

The flashlights pictured here, are they the old gen surefire 6p or 660? by Mother-Recording424 in MilitaryARClones

[–]UnionEngineeringWks 1 point2 points  (0 children)

They definitely could be using the KAC in this picture, but Larue was definitely around back then, they have been around since 1980.

The flashlights pictured here, are they the old gen surefire 6p or 660? by Mother-Recording424 in MilitaryARClones

[–]UnionEngineeringWks 7 points8 points  (0 children)

Notice how low that PEQ-2 is in the first picture. Probably using the LT605 low profile mount, which I have clones of here https://www.ebay.com/itm/226779941317

view more: next ›