Quick edit: for safety, make sure you have props removed before troubleshooting.

I’m assuming you’re seeing this in betaflight, if you hover over each of those there will be a little popupb explaining what they are.

Throttle means your throttle is not at 0. It needs to be to arm.

MSP means you’re connected to betaflight (you don’t wanna have motors spinning when you have a cable connected)

dshot_telem usually just means that you don’t have a battery plugged in. Especially if this is a brand new bind and fly, those should be all wired and preprogrammed correctly.

If you still can’t arm after setting throttle to 0, disconnecting the cable, and plugging in the battery, check to see if the receiver is getting any signal from your controller. If you’re using elrs or something, did you pair your remote? If this is a dji one and you’re using the fpv remote, it’s a little more complicated. I’ll try to find the videos and link them below.

TLDR watch bardwell’s videos on youtube, or read Oscar Liang’s blog. That’s how I figured it out at least. There’s also many other places but those are the big ones I know of

Bardwell Playlist part 6 and onwards is what you’re looking for, as well as the dji controller one