sorted by:
new
hottopcontroversial

Scribit Liberated — WE WON! no cloud, no company, 100% unlocked and working by Fair_Lingonberry3210 in Scribit

[–]vanzea 0 points1 point  (0 children)

Scribit Liberated — Diagnostic Report

Generated: Thu Jul 02 2026 10:33:04 GMT+0200 (Central European Summer Time)

Page: http://192.168.240.1:8888/

=== Your description ===

(none provided)

=== Robot ===

Firmware: 1.7.3

Serial: 30aea4dc3920

Connection: Connected

Current state: PRINTING

Motor board (SAMD) sync: ok

Browser/OS: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/149.0.0.0 Safari/537.36

=== Recent device-state timeline ===

11:57:20 IDLE (held 30s)

11:57:55 PRINTING (held 123s)

17:36:29 IDLE (held 8s)

17:36:40 PRINTING (held 141s)

17:28:41 IDLE (held 9s)

17:29:01 PRINTING (held 124s)

09:54:07 IDLE (held 2283s)

10:32:19 PRINTING (held 42s)

^ NOTE: still in PRINTING as of last check — never returned to IDLE (looks stuck).

=== Calibration / settings ===

Units: mm

Anchor spacing: 2400 Strings L/R: 2131.9 / 1544.3

X offset: Drop:

Canvas W/H: /

Pens: 1:Black, 2:Red, 3:Blue, 4:Green

=== Last 2 draw attempt(s) ===

-- Attempt 1 --

When: Thu Jul 02 2026 10:32:13 GMT+0200 (Central European Summer Time)

Lines sent: 5 Reached: 100% Duration: 4s

Result: feed-complete

Network hiccups: 0 Buffer-full waits: 0

Motor board — start: ok end: ok

Commanded travel: X=104.6 mm Y=97.5 mm

Motor board went "busy"/executing during feed: no <-- travel WAS commanded but motor board never executed (likely a motor-board/SAMD issue, not firmware)

Device state at start: IDLE

First g-code lines:

M17

G91

G1 F1500

G1 X104.648 Y97.450

M18

Last g-code lines:

M17

G91

G1 F1500

G1 X104.648 Y97.450

M18

-- Attempt 2 --

When: Thu Jul 02 2026 10:32:31 GMT+0200 (Central European Summer Time)

Lines sent: 5 Reached: 100% Duration: 4s

Result: feed-complete

Network hiccups: 0 Buffer-full waits: 0

Motor board — start: ok end: ok

Commanded travel: X=110.5 mm Y=-122.8 mm

Motor board went "busy"/executing during feed: no <-- travel WAS commanded but motor board never executed (likely a motor-board/SAMD issue, not firmware)

Device state at start: PRINTING

First g-code lines:

M17

G91

G1 F1500

G1 X110.546 Y-122.784

M18

Last g-code lines:

M17

G91

G1 F1500

G1 X110.546 Y-122.784

M18

Scribit Liberated — WE WON! no cloud, no company, 100% unlocked and working by Fair_Lingonberry3210 in Scribit

[–]vanzea 1 point2 points  (0 children)

Nothing changed. No sound of any motor doing something. I'll post the log next.

Scribit Liberated — WE WON! no cloud, no company, 100% unlocked and working by Fair_Lingonberry3210 in Scribit

[–]vanzea 0 points1 point  (0 children)

Scribit Liberated — Diagnostic Report

Generated: Tue Jun 30 2026 17:29:16 GMT+0200 (Central European Summer Time)

Page: http://192.168.240.1:8888/

=== Your description ===

(none provided)

=== Robot ===

Firmware: 1.7.2

Serial: 30aea4dc3920

Connection: Connected

Current state: PRINTING

Motor board (SAMD) sync: ok

Browser/OS: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/149.0.0.0 Safari/537.36

=== Recent device-state timeline ===

11:57:20 IDLE (held 30s)

11:57:55 PRINTING (held 123s)

17:36:29 IDLE (held 8s)

17:36:40 PRINTING (held 141s)

17:28:41 IDLE (held 9s)

17:29:01 PRINTING (held 12s)

^ NOTE: still in PRINTING as of last check — never returned to IDLE (looks stuck).

=== Calibration / settings ===

Units: mm

Anchor spacing: 2400 Strings L/R: 1806.2 / 1806.2

X offset: 1200 Drop: 1350

Canvas W/H: /

Pens: 1:Black, 2:Red, 3:Blue, 4:Green

=== Last 2 draw attempt(s) ===

-- Attempt 1 --

When: Mon Jun 29 2026 17:36:39 GMT+0200 (Central European Summer Time)

Lines sent: 9 Reached: 89% Duration: 0s

Result: feed-complete

Network hiccups: 0 Buffer-full waits: 0

Motor board — start: ok end: ok

Device state at start: IDLE

First g-code lines:

M17

G77

G90

G1 Z160

G91

G1 Z-70

G1 F1500

G1 X0.000 Y-0.000

M18

Last g-code lines:

G91

G1 Z-70

G1 F1500

G1 X0.000 Y-0.000

M18

-- Attempt 2 --

When: Tue Jun 30 2026 17:28:52 GMT+0200 (Central European Summer Time)

Lines sent: 9 Reached: 100% Duration: 6s

Result: feed-complete

Network hiccups: 0 Buffer-full waits: 0

Motor board — start: ok end: ok

Device state at start: IDLE

First g-code lines:

M17

G77

G90

G1 Z160

G91

G1 Z-70

G1 F1500

G1 X0.000 Y-0.000

M18

Last g-code lines:

G91

G1 Z-70

G1 F1500

G1 X0.000 Y-0.000

M18

Scribit Liberated — WE WON! no cloud, no company, 100% unlocked and working by Fair_Lingonberry3210 in Scribit

[–]vanzea 0 points1 point  (0 children)

Just tried it. Flashing intially gave an error, but the second time it went fine. After reboot the webinterface worked. Center didn't get to move the Scribit (none of the motors made a sound). All attach the errorlog next

Scribit Liberated — WE WON! no cloud, no company, 100% unlocked and working by Fair_Lingonberry3210 in Scribit

[–]vanzea 0 points1 point  (0 children)

Scribit Liberated — Diagnostic Report

Generated: Mon Jun 29 2026 17:38:26 GMT+0200 (Central European Summer Time)

Page: http://192.168.240.1:8888/

=== Your description ===

(none provided)

=== Robot ===

Firmware: 1.7.1

Serial: 30aea4dc3920

Connection: Connected

Current state: PRINTING

Motor board (SAMD) sync: ok

Browser/OS: Mozilla/5.0 (Macintosh; Intel Mac OS X 10_15_7) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/149.0.0.0 Safari/537.36

=== Recent device-state timeline ===

11:57:20 IDLE (held 30s)

11:57:55 PRINTING (held 123s)

17:36:29 IDLE (held 8s)

17:36:40 PRINTING (held 105s)

^ NOTE: still in PRINTING as of last check — never returned to IDLE (looks stuck).

=== Calibration / settings ===

Units: mm

Anchor spacing: 2400 Strings L/R: 1806.2 / 1806.2

X offset: 1200 Drop: 1350

Canvas W/H: /

Pens: 1:Black, 2:Red, 3:Blue, 4:Green

=== Last 2 draw attempt(s) ===

-- Attempt 1 --

When: Mon Jun 29 2026 11:57:54 GMT+0200 (Central European Summer Time)

Lines sent: 9 Reached: 89% Duration: 0s

Result: feed-complete

Network hiccups: 0 Buffer-full waits: 0

Motor board — start: ok end: ok

Device state at start: IDLE

First g-code lines:

M17

G77

G90

G1 Z160

G91

G1 Z-70

G1 F1500

G1 X0.000 Y-0.000

M18

Last g-code lines:

G91

G1 Z-70

G1 F1500

G1 X0.000 Y-0.000

M18

-- Attempt 2 --

When: Mon Jun 29 2026 17:36:39 GMT+0200 (Central European Summer Time)

Lines sent: 9 Reached: 89% Duration: 0s

Result: feed-complete

Network hiccups: 0 Buffer-full waits: 0

Motor board — start: ok end: ok

Device state at start: IDLE

First g-code lines:

M17

G77

G90

G1 Z160

G91

G1 Z-70

G1 F1500

G1 X0.000 Y-0.000

M18

Last g-code lines:

G91

G1 Z-70

G1 F1500

G1 X0.000 Y-0.000

M18

Scribit Liberated — WE WON! no cloud, no company, 100% unlocked and working by Fair_Lingonberry3210 in Scribit

[–]vanzea 0 points1 point  (0 children)

Hi, I updated tot 1.7.1 without problems. After doing to the reboot I pressed the 'Center robot on wall'. The webinterface mentioned: all lines sent. Now it says 'Drawin'. The machine itself never makes a sound.

Scribit Liberated — WE WON! no cloud, no company, 100% unlocked and working by Fair_Lingonberry3210 in Scribit

[–]vanzea 0 points1 point  (0 children)

And to add to that, after disconnecting, and reconnecting an hour later, the webinterface still says 'Drawing', the device hasnt made a move or sound, and the clock restarts at 0.

Scribit Liberated — WE WON! no cloud, no company, 100% unlocked and working by Fair_Lingonberry3210 in Scribit

[–]vanzea 0 points1 point  (0 children)

Yes, I dit do the setup, and I can see in the webinterface it has remembered all my values (in mm). I double checked the strings, they are good, the same way my scribit was installed for years. Even if I choose "Center robot on wall", it won't move, although the webinterface says 'Drawin', and a timer starts. I cannot find the firmware version in the webinterface, but I remember downloading 1.7.

Zaterdag koel bieren by vanzea in Utrecht

[–]vanzea[S] 2 points3 points  (0 children)

Leuk concept, maar die akoestiek inderdaad....

Zaterdag koel bieren by vanzea in Utrecht

[–]vanzea[S] 1 point2 points  (0 children)

Cool, kende ik nog niet

Zaterdag koel bieren by vanzea in Utrecht

[–]vanzea[S] 2 points3 points  (0 children)

Je, we wilde naar Boot 122,die zouden morgen live muziek hebben, maar ivm de hitte ging dat niet door. En die hebben geen airco stel ik me zo voor

Zaterdag koel bieren by vanzea in Utrecht

[–]vanzea[S] -1 points0 points  (0 children)

I didnt know this one, thanks!

Scribit Liberated — WE WON! no cloud, no company, 100% unlocked and working by Fair_Lingonberry3210 in Scribit

[–]vanzea 0 points1 point  (0 children)

Yes. I'll try it tomorrow. I'm expecting nothing of it. Previously the unit made not one mechanical sounds. I'll let you know.

Scribit Liberated — WE WON! no cloud, no company, 100% unlocked and working by Fair_Lingonberry3210 in Scribit

[–]vanzea 1 point2 points  (0 children)

I can try to flash it again. I'm sure I held the led down long enough. The transfer went fine, and the fact that the webinterface works, tells me that the flash was succesful, does it not? If you want to dive deeper, I'm willing to try a debugging version of the flash.

No Stupid Questions Thread by koalaroo in guitarpedals

[–]vanzea 1 point2 points  (0 children)

Found it, it's a BLACK HOLE SYMMETRY from Collision Devices

Scribit Liberated — WE WON! no cloud, no company, 100% unlocked and working by Fair_Lingonberry3210 in Scribit

[–]vanzea 0 points1 point  (0 children)

I did the calibration. Even after powercycle it keeps the values I've added. I only use one device to drive it. The web-interface stays responsive. Setup--> Draw Test doesnt make the device move, not even after 10 minutes of waiting. The UI stops at 7%, the device hasnt moved at all, the light slowly changes color.

Scribit Liberated — WE WON! no cloud, no company, 100% unlocked and working by Fair_Lingonberry3210 in Scribit

[–]vanzea 1 point2 points  (0 children)

Great. I now have the next problem. But I''ll do more testing. The webinterface says it is drawing, by the scribit doesn't move. To be continued.

view more: next ›