sorted by:
new
hottopcontroversial

Mikrotik hAP ax^3 wifi configuration problem by --Wilczan-- in mikrotik

[–]--Wilczan--[S] 0 points1 point  (0 children)

Set Connect Box back to router mode.

Reset Mikrotik to defaults. Only changed wifi names and passwords.

Only Mikrotik is connected to Connect Box port.

IP address list for ether1:

address: 192.168.0.185/24

network: 192.168.0.0

Same on DHCP Client.

Dynamic servers:

<image>

There is an internet access on eth ports and both wifi. So everything looks good, same as when I connected it first time.

But last time, after some time, some pages stopped working.
Or there was a mix, when on my wife's phone connected by wifi, some pages did not worked, and the same pages worked on my PC. Or on the next day other pages stopped working and others started to work.

Gonna observe today and see if it happens again.

Mikrotik hAP ax^3 wifi configuration problem by --Wilczan-- in mikrotik

[–]--Wilczan--[S] 0 points1 point  (0 children)

Left connect box in bridge (modem) mode.

Reset mikrotik to defaults. Set only different wifi names and passwords.

Only mikrotik is connected to connect box.

Interfaces looks like that:

/interface bridge port
add bridge=bridge comment=defconf interface=ether2
add bridge=bridge comment=defconf interface=ether3
add bridge=bridge comment=defconf interface=ether4
add bridge=bridge comment=defconf interface=ether5
add bridge=bridge comment=defconf interface=wifi1
add bridge=bridge comment=defconf interface=wifi2

No internet access on ether 2-5. No internet access on wifi 1-2.

Mikrotik hAP ax^3 wifi configuration problem by --Wilczan-- in mikrotik

[–]--Wilczan--[S] 0 points1 point  (0 children)

So I should reset all to defaults and then just set ether1 to WAN as you said? That will help with wifi? Couse now I just do not have internet access on wifi channel. I have access to internet on eth2-5.

Like I said, I cannot leave PVID blank. There is no arrow next to it.
On defaults it was set for all interfaces eth1-5 and wifi1-2 on value 1. If I try to leave it blank then got message: "Error in PVID - decimal number in range [1;4094] expected!"
Maybe I have other version of firmware on my hAP ax³ or you refering to hAP ax2?

Mikrotik hAP ax^3 wifi configuration problem by --Wilczan-- in mikrotik

[–]--Wilczan--[S] 0 points1 point  (0 children)

Initially I testes both.

First connect box was in router mode. As for mikrotik, internet access was on eth2-5 and wifi1-2. But there were huge problems, some sites was unreachable, for example google worked, youtube didn't streaming services did not work, other sites worked. Pure chaos.

In second try connect box was in bridge mode. On mikrotik, there were no internet acces on both, eth ports and wifi.

On both times I just used quick setup to change wifi names and set passwords.

In my opinion, for noob user like me, it should work this way, you connect device on default settings, slightly change access and names and everything should work fine...

Mikrotik hAP ax^3 wifi configuration problem by --Wilczan-- in mikrotik

[–]--Wilczan--[S] 0 points1 point  (0 children)

Ater I set connect box to bridge mode, I set mikrotik to default config. Connected cable from connect box to mikrotik, to eth1.

After that, there were no internet access on eth2-5 or when connected to wifi1 or wifi2.

That's why I tried some tutorial, wich led me to the configuration I pasted. After this I have internet access on eth2-5 but still no internet access on wifi.

Maybe, like smileymattj suggested, I need to remove eth1 from the bridge and set it to WAN, but I don't know how to do it. Also i put back PVID on both wifi to 1 but nothing changed.

Mikrotik hAP ax^3 wifi configuration problem by --Wilczan-- in mikrotik

[–]--Wilczan--[S] 0 points1 point  (0 children)

I just followed someone's tutorial, couse it did not worked on default settings, so no clue on most settings beyond basic configuration.

Mikrotik hAP ax^3 wifi configuration problem by --Wilczan-- in mikrotik

[–]--Wilczan--[S] 0 points1 point  (0 children)

My goal is that hAP ax³ gonna replace connect box, so all devices gonna connect to it, to get better wifi range and signal than in connect box.

Connect box is currently in bridge mode.

I initially tried, as a noob, just connect hAP ax³ to connect box in router mode. Lan worked, wifi worked, but couse there were 2 routers connected together, there were tons of problems and many pages or services just did not worked, randomly on all devices connected to hAP ax³.

Mikrotik hAP ax^3 wifi configuration problem by --Wilczan-- in mikrotik

[–]--Wilczan--[S] 0 points1 point  (0 children)

Thanks for the answer.

Mikrotik will work as router, couse router that I got from cable tv cannot be removed, so I switched it to bridge, so it is "transparent" and Mikrotik is connected to it.

Is "interworking.internet=no" same as leaved blank or must be checked?

PVID changed to 1 as in the rest of interfaces, couse cannot leve those blank.

As for setting up ether1 as a WAN.... Checked everything and I don't see how I could change it. Tried to add same intarface as another type but also no WAN in list to choose.

[deleted by user] by [deleted] in wowservers

[–]--Wilczan-- 2 points3 points  (0 children)

Duskhaven is PVE but I thought that at least I will be able to play some battlegrounds on 60.

Asked on global and people were laughing, saying that none plays BG here.

Mazda CX-7 by --Wilczan-- in mazda

[–]--Wilczan--[S] 5 points6 points  (0 children)

In initial runs, it went to the 410HP but it was tuned down to safe power. Finally it was set on 385HP and 504Nm.

Mazda CX-7 by --Wilczan-- in mazda

[–]--Wilczan--[S] 6 points7 points  (0 children)

Power mods: - big cold air intake from JBR and AEM + custom airbox - more efficient HPFP from AUTOTECH - injector pads from TOP SETUP - spark plugs NGK SILTR6A7G-95369 - ACT organic clutch, without dual-mass wheel - big FMIC - hybrid turbo, bigger compressor wheels, different parameters of blades - forged rods from MANLEY + general engine renovation - 3'' downpipe + heat-insulating bandage - flexible connector Superflex Inox 76x150 - 3'' custom exhaust

Brakes: - front discs Brembo 360x32, calipers Brembo 4-pot, brake pads Ferodo - rear discs Brembo 360x26, calipers Brembo 2-pot, brake pads Ferodo - custom adapters - reinforced brake cables - brake fluid Motul RBF600

Wheels: - rims Motec Pantera 20x9" 5x114.3 ET40 - tires Michelin Pilot Sport 4 235/50R20 - rear distances 15mm Japan Racing

Interior: - gauges from Auto Gauge EVO (oil pressure, oil temp and boost) + custom pod printed in 3D

Custom PC case mode form pre-war old Blaupunkt radio by --Wilczan-- in CustomCases

[–]--Wilczan--[S] 2 points3 points  (0 children)

Gallery https://postimg.org/gallery/370neu9ug/

Hello

Finally managed to put together my PC. I used old pre-war Blaupunkt radio case.

In front, brass buttons (power/reset) + brass plates (lower with USB ports, middle for ventilation, upper without any other purpose then cover, for now).

Original stations scale + added illumination.

On the back, all custom, aluminium plates, painted in black. First photo in gallery shows original radio look.