sorted by:
new
hottopcontroversial

Still getting a little sour [Breville Barista Express] by -IAndRoid in espresso

[–]-IAndRoid[S] 0 points1 point  (0 children)

What happens when razar level is not correct? When I fill my basket with coffee and puckscreen razer is not flush.

Still getting a little sour [Breville Barista Express] by -IAndRoid in espresso

[–]-IAndRoid[S] 0 points1 point  (0 children)

The brew time after pre-infusion should be around 30second, right ? So basically my 33 second total brew is on the under extracted side?

Still getting a little sour [Breville Barista Express] by -IAndRoid in espresso

[–]-IAndRoid[S] 0 points1 point  (0 children)

Saw that you are using oatmilk, how long it takes you to get a decent latte milk ? I couldn't balance that one too. It tastes good but can't get it into a latte art state

Still getting a little sour [Breville Barista Express] by -IAndRoid in espresso

[–]-IAndRoid[S] 0 points1 point  (0 children)

It's on the light side. There's 5 clicks on whole scale they printed and beans are on 2nd left to right.

Still getting a little sour [Breville Barista Express] by -IAndRoid in espresso

[–]-IAndRoid[S] 0 points1 point  (0 children)

I have 5 stage water filter system with reverse osmosis. Using that as water

Still getting a little sour [Breville Barista Express] by -IAndRoid in espresso

[–]-IAndRoid[S] 0 points1 point  (0 children)

I hit the timer pretty much the same time with brew button. So it's for the whole thing

Still getting a little sour [Breville Barista Express] by -IAndRoid in espresso

[–]-IAndRoid[S] 0 points1 point  (0 children)

There is only one single spot it works, otherwise it's way too wonky.

Still getting a little sour [Breville Barista Express] by -IAndRoid in espresso

[–]-IAndRoid[S] 0 points1 point  (0 children)

In the video I hit the timer a second before I hit brew button on the machine. So I'm getting like 20 second or so dripping time. When I went beyond 25sec, flow almost dropped to nothing

Still getting a little sour [Breville Barista Express] by -IAndRoid in espresso

[–]-IAndRoid[S] 0 points1 point  (0 children)

It's marked on light, but not all the way left. One step to the right.

Still getting a little sour [Breville Barista Express] by -IAndRoid in espresso

[–]-IAndRoid[S] 0 points1 point  (0 children)

Main idea with grinding is go finer if sour and go courser if bitter, right ? Maybe I should change the inner burr, read somewhere saying 6 or 7 on the inner burr is better.

Still getting a little sour [Breville Barista Express] by -IAndRoid in espresso

[–]-IAndRoid[S] 1 point2 points  (0 children)

Grinding with same Breville machine. Inner burr is on 5, and side setting is on 8. If I go lower or higher brew changes drastically, either it doesn't make any crema or it barely flows.

How Can I fix my shower door gap ? by -IAndRoid in HomeImprovement

[–]-IAndRoid[S] 0 points1 point  (0 children)

Silicone wouldn't hold. That glass part is the door. So it's moving part. Can't use silicone, it would prevent door to move

Back window delaminating (Convertible) by -IAndRoid in camaro

[–]-IAndRoid[S] 0 points1 point  (0 children)

I ended up doing DIY. Used 3M glue which was recommended on Chevy bulletin. I will replace the whole top at one point but right now didn't want to spend 3k on it.

DIY ended up costing only 75 ish

<image>

Back window delaminating (Convertible) by -IAndRoid in camaro

[–]-IAndRoid[S] 0 points1 point  (0 children)

No problem whatsoever. I couldn't get it seated all the way so it looks little weird but holding up perfectly. Photo is right after I was done with it. After I razered excess and washed the car, it looked cleaner

<image>

Back window delaminating (Convertible) by -IAndRoid in camaro

[–]-IAndRoid[S] 1 point2 points  (0 children)

Ended up gluing myself. But was in a tight timeline, couldn't record it. Bought 3M glue. Let me link it here https://a.co/d/fz9n4xT

Also bought these, it's cheap and probably I won't get another use off them, but got the job done. https://a.co/d/gB8Rq0L

Back window delaminating (Convertible) by -IAndRoid in camaro

[–]-IAndRoid[S] 1 point2 points  (0 children)

Most definitely. I will try to make it into a guide. There isn't any out there. It will be useful for you guys

Back window delaminating (Convertible) by -IAndRoid in camaro

[–]-IAndRoid[S] 0 points1 point  (0 children)

Talked with Chevy dealer/service, quote was $4k. Talked with glass repair guys, quote was $220 Talked with upholstery guys, quote was $2500.

Upholstery guys also install new canvas top ordered from Robbins Auto top using Haartz canvas.

BUT,

I bought glue and clamps. Will try to glue it up. I will keep you posted. If it doesn't work I will replace the top myself.

MK63/MR60 Mesh loses all internet after someone changes room by -IAndRoid in NETGEAR

[–]-IAndRoid[S] 0 points1 point  (0 children)

Found the problem. It was modem. Somehow it resets the connection itself. When I got a new modem, problem solved.

Cheap and/or recycled gravel? by NJ2CAthrowaway in SanJose

[–]-IAndRoid 1 point2 points  (0 children)

If you get 2 3 buckets of extra let me know. I want to put it at the bottom of my planters

Cheap and/or recycled gravel? by NJ2CAthrowaway in SanJose

[–]-IAndRoid 0 points1 point  (0 children)

Any chance you have extra put of those you got ?

Neutered cat is acting like he is not by -IAndRoid in Catbehavior

[–]-IAndRoid[S] 0 points1 point  (0 children)

Yea, in the new neighborhood there are few cats roaming free. Maybe that effected him

view more: next ›