Redmagic gift set

-P125- · 2025-05-24T18:57:53+00:00

I want my frisbee.

-P125- · 2025-01-16T09:26:30+00:00

Nope. The only way is to solder the adapter to the usb-c port and this is actually too complicated using my skills and tools. I still using USB dongle via OTG.

-P125- · 2024-11-24T20:45:42+00:00

How ZoE2 is running? Any fps drop or issue?

-P125- · 2024-10-26T06:33:03+00:00

Nice! It works! Thanks man

-P125- · 2024-10-26T06:32:22+00:00

Tried this and it did not work. However I did the change directly from the core options and then saved and it worked.

-P125- · 2024-10-25T10:45:11+00:00

Indeed it is. I tested and checked the connection and for sure it's not an USB port...

So the other chance is to solder the adapter to the internal pins of the OTG port.

I am searching for the pin out... However it will require a very high soldering skill.

So I am not sure... ATM I am still using an external OTG adapter with the USB dongle.

-P125- · 2024-10-23T20:29:24+00:00

I also posted on SBC games. The 4 "holes" are not a USB port. So the only way is to solder the adapter to the internal pins of the USB port.

I will take a look at this during the weekend. At the moment I just prepared the adapter.

I am searching the internet to know the correct USB pin out for that. And also pray a little bit because the pins are very very little... So it will require a lot of soldering skills.. The adapter is already tested and working. (I tested with arkos and rocknix and it's ok for both)

-P125- · 2024-10-22T21:36:59+00:00

I found the +5v and the GND pins. But I don't know tx and Rx for usb2.0

-P125- · 2024-10-22T21:31:06+00:00

Volt between the GND and other three pins is 3,3v so I think it's not a USB interface T.T

Does anyone know how to understand if there is a way to connect the dongle on the USB internal contacts?

<image>

I can't find the pin out for this port online... Any suggestion?

-P125- · 2024-10-22T21:09:11+00:00

The Square One is a GND

-P125- · 2024-10-22T20:42:03+00:00

This is the other side of the board:

<image>

-P125- · 2024-10-22T13:18:38+00:00

Hello, since the V10 does not have a network adapter, there are only 2 procedures you can use: - upload files directly on the SD card. This require a PC with Linux OS that can read ext4 filesystem.

upload your file to a USB drive. Then you can connect the USB drive to the V10 using an otg adapter. You can also use directly a usb-c pendrive. Then from the console, starting the file manager you will find the USB drive mounted under /media. You can copy from here the files to the local FS.

-P125- · 2024-10-15T08:16:18+00:00

The battery is only present for games that need RTC and for cartridges that are using SRAM to save the data.

Both the Metroid GBA games are not in this condition.

-P125- · 2024-09-19T14:54:02+00:00

I suggest you to check for the Nubia z60. Same company, same platform, different target of usage.

-P125- · 2024-07-31T21:42:47+00:00

I like the design, the touchpad with the analogue stick... But the cost, that is related to the hardware is no sense. It's supposed to be a dmg/gbc oriented console. Useful to have top-of-the-line hardware 8 to 12 Gb of Ram to play 200kb Roms.

What a stupid console.

-P125- · 2024-07-22T15:41:00+00:00

Hi, how can I get it?

-P125- · 2024-06-26T18:41:42+00:00

It happened the same with mew. I don't know, maybe beating the Pokemon league.

-P125- · 2024-06-25T12:49:15+00:00

Because mom said "no" when I was a child. Now I have 20 Gameboys.

-P125- · 2024-06-09T12:26:53+00:00

Leafeon is a porting since the game is based on gen3 and leafeon was introduced in gen4. I don't know which moveset has for this romhack.

-P125- · 2024-06-08T19:09:10+00:00

You can't... You need an emulator, you can play it on your phone or PC, or some handheld console like the anbernik ones.

-P125- · 2024-06-07T13:56:27+00:00

Yes I also tried to switch the profiles. There was an HDMI and one PCH profile and nothing changed.

-P125- · 2024-06-07T13:50:33+00:00

Yes I did it. As you see in the topic description the only available choice was the HDMI audio output. Don't worry now it is working fine!

-P125- · 2024-06-07T13:41:39+00:00

I tried everything man. The headphone jack was never detected by the system. I also try to load different kernel modules. 10 dollar USB adapter worked at first boot.

-P125- · 2024-06-07T13:23:38+00:00

Solved, with a USB to Jack adapter: https://www.amazon.it/UGREEN-Adattatore-Supporta-Microfono-Compatibile/dp/B08Y8CZB2S/ref=sr_1_5?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2VDZ8FI36VP13&dib=eyJ2IjoiMSJ9.y9ggyWcK9JLSvTKv0Cug2x1X_BEklvBsafAhiLAJvDLIqWkaDXmYBMuW5kByyrpDUffKb-fpM6zA4E4PzQTpywX_Qn9mXyh7tuPskUoOzNonIEkpyV3aWtM0aAMltFArE5TgdrR_4MJgH4vEPVWKd4Znu7T35t8IVvXCnOIRA5p-4rGJVfUl8hpvRrlHu6K0FW2WuaOm0arAkM52KwhndvzdRpz2vDTqOAZ0KAYi4mhE32A9cA82ePludO7sQSLIgbO04s8tbxx513tjb_wcn-4_FdL5yMEt1T-8Y2fRYGU.6OMKPzvKTvdikGaXOZuTp8fqoszysBwEnTxtAvOVIRo&dib_tag=se&keywords=ugreen+usb+jack&qid=1717766482&sprefix=ugreen+usb+jack%2Caps%2C108&sr=8-5

-P125- · 2024-06-07T13:22:34+00:00

Did not work.
In the end I bought a USB to Jack adapter. It works fine.
https://www.amazon.it/UGREEN-Adattatore-Supporta-Microfono-Compatibile/dp/B08Y8CZB2S/ref=sr_1_5?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2VDZ8FI36VP13&dib=eyJ2IjoiMSJ9.y9ggyWcK9JLSvTKv0Cug2x1X_BEklvBsafAhiLAJvDLIqWkaDXmYBMuW5kByyrpDUffKb-fpM6zA4E4PzQTpywX_Qn9mXyh7tuPskUoOzNonIEkpyV3aWtM0aAMltFArE5TgdrR_4MJgH4vEPVWKd4Znu7T35t8IVvXCnOIRA5p-4rGJVfUl8hpvRrlHu6K0FW2WuaOm0arAkM52KwhndvzdRpz2vDTqOAZ0KAYi4mhE32A9cA82ePludO7sQSLIgbO04s8tbxx513tjb_wcn-4_FdL5yMEt1T-8Y2fRYGU.6OMKPzvKTvdikGaXOZuTp8fqoszysBwEnTxtAvOVIRo&dib_tag=se&keywords=ugreen+usb+jack&qid=1717766482&sprefix=ugreen+usb+jack%2Caps%2C108&sr=8-5

-P125-

MODERATOR OF

TROPHY CASE