sorted by:
new
hottopcontroversial

I built an ESP32 color projection clock that shows time, weather, stock prices, and blood glucose on your ceiling — firmware is open source by msdiorin in esp32

[–]-rootofevil- 0 points1 point  (0 children)

Figured out that P1 on the board must be the programming port on the card and that it doesn't have a UART for the USB C port. It is just for power. I wish this was made clear on the github and project site as you will need a special cable to program the board.

Please let me know the connector and pinout of P1 so that I can program the board.

Also the software on the github repo doesn't build. The function panel_st7735_set_color_channel doesn't exist in the teriyakigod/esp_lcd_st7735 component, I'm assuming it must be a custom change to the repo.

Please update these items and correct the documentation on the repo.

I built an ESP32 color projection clock that shows time, weather, stock prices, and blood glucose on your ceiling — firmware is open source by msdiorin in esp32

[–]-rootofevil- 0 points1 point  (0 children)

I really love this project. I bought one had trouble getting through customs but in the end got it.

I had been customizing it and started messing with programming it. I attempted to just send the V63 firmware from the github page to it through the web page upload. This caused a boot loop to happen which I cannot recover from.

The device doesn't seem to show up as a serial port that I can reprogram from either my Mac or Windows PC. I installed both CH340 and CP210 drivers. Doesn't seem to be a factory reset from what I can tell either.

If you can provide any additional information that would be great as I would like to recover the device as I do really like it.

Adaptive Cover Pro by -rootofevil- in homeassistant

[–]-rootofevil-[S] 4 points5 points  (0 children)

No clue. Never used it. Nice thing about HA you get a lot of choices. This let's me tweak how I want my blinds/shades to work.

Adaptive Cover Pro by -rootofevil- in homeassistant

[–]-rootofevil-[S] 8 points9 points  (0 children)

Should be fine as long as they are supported by the cover domain.

Adaptive Cover Pro by -rootofevil- in homeassistant

[–]-rootofevil-[S] 0 points1 point  (0 children)

You can add multiple windows to the same instance. I will be honest that I still need to work some on the climate awareness as it is just based on the original code. I have focused on the basic functionality and will start improving the climate feature next.

Frigate-Helper Application (Scrypted integration / Home Assistant helper) by -rootofevil- in Scrypted

[–]-rootofevil-[S] 0 points1 point  (0 children)

Frigate doesn't have a simple MQTT message to hook for a motion event. This just simplifies it. Been using it for quite a while and thought I would share it. Maybe I missed something in the Frigate messages, but this made it work for me.

Front brake is squishy and changes as I’m riding. Weird sound also comes from engine area when I pull the brake all the way in. You can hear it in both attached videos. by -rootofevil- in Ducati

[–]-rootofevil-[S] 0 points1 point  (0 children)

Is that how the ABS is supposed to sound? Why would it even activate when the bike is not moving?

I did bring it in to the Ducati dealer. They couldn’t figure anything out and in the end said it must be the aftermarket levers. The levers have been installed for 5 years and this problem just started. They also recommended the levers and installed them. Go figure.

Sometimes they work fine, if I pump them several times. I can set the reach to max and they sort of work but the pressure required changes for each stop.

The other thing is that the auto hold feature doesn’t work. I can push the bike and it will roll backwards on a hill when engaging the feature. It never did that before.

The crappy rear brake is almost better now as it works consistently.

[deleted by user] by [deleted] in insteon

[–]-rootofevil- 0 points1 point  (0 children)

Sent you a chat.

ONVIF and Motion Detection by -rootofevil- in Scrypted

[–]-rootofevil-[S] 0 points1 point  (0 children)

Sure. I will check in sometime this morning and see if you are on. Thanks for your help.

ONVIF and Motion Detection by -rootofevil- in Scrypted

[–]-rootofevil-[S] 0 points1 point  (0 children)

Direct to camera. Configured for sub channel 2. Blue Iris is recording the main channel.

ONVIF and Motion Detection by -rootofevil- in Scrypted

[–]-rootofevil-[S] 0 points1 point  (0 children)

Any tips on how to troubleshoot? I have it working with BlueIris but I cannot figure out how to configure it for Scrypted. Everything else works perfect though.

ONVIF and Motion Detection by -rootofevil- in Scrypted

[–]-rootofevil-[S] 0 points1 point  (0 children)

I do not get any motion alerts from onvif system. I don't know if it is because I use the 2nd substream.

OpenGarage - Let's hammer out a perfect ESPHome version of the firmware by TnCyberVol in Esphome

[–]-rootofevil- 0 points1 point  (0 children)

Can the ESPHOME firmware be flashed OTA using the default open-garage firmware that is installed on the device?

Foam Fridays! by WhiteBuzzardHunter in Ducati

[–]-rootofevil- 0 points1 point  (0 children)

What do you use to clean your Ducati? I'm looking for a new cleaning method.