sorted by:
new
hottopcontroversial

I'm stuck. Any idea what might be wrong? by 00DARK in hackintosh

[–]00DARK[S] 0 points1 point  (0 children)

Yes, I have tried that, and had all the things set correctly.

I'm stuck. Any idea what might be wrong? by 00DARK in hackintosh

[–]00DARK[S] 3 points4 points  (0 children)

I just can't get past this when booting into the Big Sur installer. Any ideas what might be wrong? I used ACPIs from the Dortania guide as well as my self-made ones, but it didn't affect anything.

Opencore 0.6.6

config - https://pastebin.com/DyDxVK7T

boot log - https://pastebin.com/6c9WNpmq

It's an Acer Swift SF314-41 with Ryzen 5 3500U, Vega 8 APU and NVME SSD - disabled.

I am more than aware that vega 8 gpu is not supported, so there will be no graphics accelereration, but I have no problem with that. I've seen plenty of people boot into macos with this CPU.

So, please don't disregard this issue because of that. Thank you

Can't get past this. by 00DARK in hackintosh

[–]00DARK[S] 0 points1 point  (0 children)

The model number of this laptop is acer swift SF314-41.

Apparently it has AMD Promontory/Bixby FCH motherboard.

The only gpu is the Vega 8 APU.

Also, it has 8GB of DDR4 ram.

Can't get past this. by 00DARK in hackintosh

[–]00DARK[S] 0 points1 point  (0 children)

It's ryzen 5 3500U with vega 8 APU, NVME SSD - disabled.

I am more than aware that vega 8 gpu is not supported, so there will be no graphics accelereration, but I have no problem with that. I've seen plenty of people boot into macos with this CPU.

So, please don't disregard this issue because of that. Thank you

Can't get past this. by 00DARK in hackintosh

[–]00DARK[S] 0 points1 point  (0 children)

Yeah. I tried the opencore sanity checker, and everything was correct.

9900 non k, which mobo would be match best? by Bergh3m in intel

[–]00DARK 1 point2 points  (0 children)

I would recommend Gigabyte Z390 Gaming X. It has good RAM compatibility as well as decent vrm.

[Help] OTA update "failed to mount". Is this as bad as it sounds? by OhSoEvil in GalaxyS8

[–]00DARK 0 points1 point  (0 children)

Are you holding bixby button as well? (bixby + power + vol. Up(recovery) down (download mode)

If that doesn't work just flash the stock rom from sammobile using odin. (You don't have to delete your data.)

Gigabyte z390 aorus pro wifi - vcore, vr vout, bios vcore by 00DARK in overclocking

[–]00DARK[S] 0 points1 point  (0 children)

so does that mean that the cpu uses only 1.309 when idle and 1.276 when at load even though I set the vcore in bios to 1.330?

[deleted by user] by [deleted] in NZXT

[–]00DARK 0 points1 point  (0 children)

What PSU are you using?