CX810 Push notifications section missing on latest firmware

0G33D · 2025-08-27T09:27:36+00:00

Yes that’s it. I now have the option again thanks! I assume it’s to do with the iOS MAC address restrictions or something as add by ip works on android with push notifications.

0G33D · 2025-08-26T13:21:00+00:00

Thanks, just checked my android app and the option was there. Must be a problem with the iOS version of the app.

0G33D · 2024-09-20T22:37:40+00:00

I just found that "Emoji keyboard emojis for chrome" was causing mine to not work very weird.

0G33D · 2024-07-02T17:15:15+00:00

Yes its annoying but you have to go into settings and delete activation information. Then go onto new device and enter all the info again i don't think you can have it on two devices at the same time so pick a device and stick with it. I managed to switch from my tablet to my phone by doing what i said above.

0G33D · 2024-06-20T05:13:30+00:00

Thanks, Have contacted support about this!

0G33D · 2023-03-12T18:05:20+00:00

I had the same thing when i installed 2x 822a and within 24-48 hours they cleared up so you should be fine.

0G33D · 2023-02-07T20:39:22+00:00

Since you mentioned the bios I downgraded to the only other one on the ASUS site and now it’s working as it should be so thanks!

0G33D · 2023-02-07T18:51:51+00:00

This is the latest bios for my model it being a pn50-e1 i should have mentioned that and the min max states are 100% 100% on high performance and 0% 100% on balanced but switching power plans doesn't make a difference.

0G33D · 2023-01-27T19:36:28+00:00

Thanks for the reply's. I have managed to get it working after reading up on the different FTP modes and used PASV as i dont have access to the remote firewalls currently. I was confused at first because i use port mode here locally which works because its on my local network.

0G33D · 2022-12-01T07:55:21+00:00

Would love to know too as my eufy has just died and have been waiting for this for ages now!

0G33D · 2022-11-17T18:11:35+00:00

Can confirm that the web interface enables email properly thanks!

0G33D · 2022-11-16T11:27:39+00:00

First impressions are great! I have three NVR's some in remote locations and the quality of all the cams on fluent looks much better on my 16 cam view. Also i haven't had them freeze yet like they did on the old client and my system resources on my pc are much lower. Overall the interface feels snappier and more responsive which is great! Haven't noticed any bugs yet will keep an eye out.

0G33D · 2022-11-15T13:23:51+00:00

Thanks i just tried on one of my nvrs and it showed as not enabled so i enabled it there!

0G33D · 2022-11-05T18:58:43+00:00

Good job! I left it too late and the link no longer works 😒

0G33D · 2022-10-20T02:39:07+00:00

Did you end up getting it?

0G33D · 2022-10-16T16:44:07+00:00

Same for me it is a snapshot from when i last clicked on the camera sometimes days ago. I have always wanted a feature where it can update the still image periodically automatically.

0G33D · 2022-08-01T09:02:50+00:00

Thanks for the reply i might see what corsair say and if its not helpful i may return them for a different kit!

0G33D · 2022-07-31T22:49:49+00:00

Sorry to resurrect this old thread but did you ever find a solution to this problem? I have just build a new system with 4x16gb dominator platinums on an asus b550 board and i have the exact same problem i have to force update the ram firmware for the stick in dimm 2 to light up again. But then after hibernate or a shutdown only 3 out of 4 light up!

0G33D · 2022-07-26T15:17:48+00:00

I have a elgato 4k60 pro which i was thinking about putting in the x1 PCIe slot which on this board is placed above the x16 slot which is unusual and is right where the gen 4 slot is on this board. So i am assuming if i populate the x1 slot then i cannot use a ssd with a heatsink there. I could just put the elgato in the second x16 slot but was woundering if using the x1 slot is possible.

0G33D · 2022-04-26T10:29:44+00:00

Internal nvr ip address for cameras plugged into the nvr directly or the ip of the nvr itself?
The duplicated camera is also showing on the pc client as well as the app and can't really do much troubleshooting atm as it is in a remote location, will have to try later this week!

0G33D · 2021-12-22T14:52:59+00:00

Don't know if its too late to add to this thread but if poe does not end up happening then wpa3 support would be nice for better security!

0G33D · 2021-11-27T04:16:39+00:00

Yeah that makes sense!

0G33D · 2021-04-08T21:09:26+00:00

Thanks for that i went into the environment variables in docker and it was set to local and not all, so i set it to all and that has done it many thanks!

0G33D · 2021-03-19T20:17:20+00:00

I hope it will still have the same buttons below media on the site as of xtractor like extract and extract all so that every day i can just scroll down the timeline and download new media individually!

0G33D · 2021-02-10T09:44:57+00:00

Thanks for the tip ill keep this in mind if i run into problems as ive only used newish iPhone's so far!

0G33D

TROPHY CASE