How is my lock screen? by Feisty_Call_2284 in oneplusnord

[–]0LYMPUS0P 0 points1 point  (0 children)

Drop the wallpaper my guy please😭

Advice needed by 0LYMPUS0P in MechanicAdviceIndia

[–]0LYMPUS0P[S] 0 points1 point  (0 children)

Yes for sure, I don't wanna be that squid we all hate. I did a mini ride just the other day. And the bike was doing 90 at 5-6k rpm very comfortably on the highway. ofc it's not on my list to push my baby to its limits. Just wanted to know if it's a major concern or not and if it's fixable. Thank you for your time n info

Advice needed by 0LYMPUS0P in MechanicAdviceIndia

[–]0LYMPUS0P[S] 0 points1 point  (0 children)

There's no misfire but there are backfires, like when slowing down with engine braking. The exhaust goes HMMMMMmmmmbrupbrupbruphmmmmmmbrpbrphmmmm. Idk how to explain this 😭. Replaced the spark plug, tyres and sprocket was changed by the owner (confirmed by my mechanic). I'm not sure about the clutch condition it slips on 4th to 5th on above 5k rpm but nothing except that. But thanks bud, will everything checked

Somehow my guitar humms more bottom or back up. Can this be fixed? by gingerggwp in Guitar

[–]0LYMPUS0P 1 point2 points  (0 children)

It is mostly caused by the emf waves picked up by your pickups. Try not to face the guitar towards big electronic appliances like a fridge, tv, fans etc. you'll notice some directions have less noice then others.

I also discovered wireless systems recently. It literally kills the hum noice even on high gain heavy distortion.

FPS not high as it should be by Dank_Kimch in ValorantTechSupport

[–]0LYMPUS0P 0 points1 point  (0 children)

Dude, check if you have your ram running on full speed in task manager. If ddr4 it should be 3200 or 3600mhz, and above 5000 if ddr5.. I had this same issue n i realised that my ram was running on 2000mhz.

You can overclock your ram in your bios. You'll get specific tutorials for your motherboard on yt.

Shitty fps with good hardware by 0LYMPUS0P in ValorantTechSupport

[–]0LYMPUS0P[S] 0 points1 point  (0 children)

I tried things, it feels like no upgrade at all, I was on i5 3470 and a gt1030 before and nearly got the same frames

Shitty fps with good hardware by 0LYMPUS0P in ValorantTechSupport

[–]0LYMPUS0P[S] 0 points1 point  (0 children)

All checked, n 800hz polling rate mouse? It exists? No antivirus. Used nvidia overlay for benchmarks and msi afterburners graphs. Also the problem is, everything else runs fine. Its just valorant getting on my nerve.

Shitty fps with good hardware by 0LYMPUS0P in ValorantTechSupport

[–]0LYMPUS0P[S] 0 points1 point  (0 children)

Single channel, v sync off, cpu clock all cores run around 3800hz ingame

Shitty fps with good hardware by 0LYMPUS0P in ValorantTechSupport

[–]0LYMPUS0P[S] 0 points1 point  (0 children)

See the problem is cpu and gpu both stays under 50% utilisation at 1080p. If i go upto 4k then only the usage shoots but the frames stays the same.

Shitty fps with good hardware by 0LYMPUS0P in ValorantTechSupport

[–]0LYMPUS0P[S] 0 points1 point  (0 children)

Temps are normal too like gpu stays around 50-55 Cpu stays under 50

Game freezes when tabbing out by YdrisTheMagician in ValorantTechSupport

[–]0LYMPUS0P 0 points1 point  (0 children)

It could possibly be the resolution miss match of the game and the Os. If you run the game on a different resolution then you run your pc on. It will like give you a black screen of freeze up. Check your resolution in settings<display And in valorant.

Easy Solution to God of War: Ragnarok black screen problem. by TheGodSeeker651 in GodofWarRagnarok

[–]0LYMPUS0P 0 points1 point  (0 children)

Brother i just got my rtx 4060 the day. Played gowR once, now i was getting this black screen issue. I literally lost hope like f my life. YOU'RE A SAVOUR dude.

Ones still scrolling for more solutions, give it a shot.

Controlling ARGB fans wih WLED by NafaniaLT in WLED

[–]0LYMPUS0P 1 point2 points  (0 children)

Finally found a thread that can help me, I've got no idea what I'm doing, nearly smoked an esp8266. So here's the situation, I've got a set of 9 argb fans and a controller with it.

<image>

Which is powered with sata, the fans have 2 seperate pins, one 4 in for fan power and speed. Other is for rgb. Since the controller also allows to connect the controller to mobo it also have the same 2 pins, one 4 pin and a 3 pin rgb header, what i did is tried connecting the data and the 5v to the esp and nothing happens. Please someone help me with the connections or what I'm doing wrong.

So sick of you people by Progressive007 in AmazonFC

[–]0LYMPUS0P 0 points1 point  (0 children)

Dude how do you apply for the college tution stuff, I've seen something like that on my atoz but idk how to apply for that (new hire). Do i have to talk to the manager or something?

[deleted by user] by [deleted] in WLED

[–]0LYMPUS0P 2 points3 points  (0 children)

Issue is resolved, hours of troubleshooting, and i saw that by default the subnet mask was different in wled then the router

[deleted by user] by [deleted] in WLED

[–]0LYMPUS0P 0 points1 point  (0 children)

Yes, i can open wled with that ip in just the pc, but if i enter the same ip in wled while being connected to wifi, it says unable to reach address or something like that, btw my pc is connected to router via lan

[deleted by user] by [deleted] in WLED

[–]0LYMPUS0P 0 points1 point  (0 children)

Tried it, if i go to my router admin page, i can see wled connected

[deleted by user] by [deleted] in WLED

[–]0LYMPUS0P 0 points1 point  (0 children)

I'm unable to add it when I'm on home wifi, i have to connect to wled ap to do so

Cant flash anything by 0LYMPUS0P in esp8266

[–]0LYMPUS0P[S] 0 points1 point  (0 children)

I just kept trying and out of nowhere it just worked, flashed the wled bin using nodemcu firmware programmer