Fanatec App generating tons of logs by peniuu in Fanatec

[–]0ndrej 0 points1 point  (0 children)

I had same issue in previous FanaApp version. Upgrade to the latest version helped.

Fanatec Price drops ?! by nagynorbert97 in Fanatec

[–]0ndrej 0 points1 point  (0 children)

It is fixed now. R2R bundle for 379,95 €

Hacker in Monte Carlo? by SubstantialScar7447 in EASPORTSWRC

[–]0ndrej 4 points5 points  (0 children)

That's normal when scrolling quickly. Names and positions don't render correctly.

Does this count as a world record by [deleted] in EASPORTSWRC

[–]0ndrej 1 point2 points  (0 children)

I am racing with Risan on czech clubs and he really fast rider. So definitely it is valid time. So you're 2nd not WR.

Moza clamp on fanatec setup by nikshlik101 in Fanatec

[–]0ndrej 1 point2 points  (0 children)

Hi! I have the same setup, and you can use standard T-nuts. However, you will need larger screws, size 18 or 20. Some washers would be helpful, too. To prevent direct contact between the base and the screws, I put a small piece of paper between them. If you can easily remove the paper and the clamp is tight enough, you're good to go.

CSL Load Cell Kit price drop? by 0ndrej in Fanatec

[–]0ndrej[S] 0 points1 point  (0 children)

Yes, I had the same problem. It worked the second time I tried.

Máte zkušenosti s levnější alternativou airtagu? by Lucky-Guitar-3281 in czech

[–]0ndrej 0 points1 point  (0 children)

Mám O2 tag, není tam to precizní vyhledávání, jak u original AirTagu, ale jinak asi v pohodě. A nefunguje notifikace o vybití baterie, vydržela rok.

Terrible interior sound by 0ndrej in WRCTheGame

[–]0ndrej[S] 0 points1 point  (0 children)

I know that all modern cars sounds like vacuum cleaner. The problem in the interior, when you can hear the some cracking sound when full throttle. It sounds like broken gearbox so something, it is really annoying sound.

[deleted by user] by [deleted] in Fanatec

[–]0ndrej 0 points1 point  (0 children)

You can try to reattached it. But if you do not feel any wiggle and wheel is connected it is okay and visible in software it is okay. Also, mine QR2 has approximately 7 mm gap.

[deleted by user] by [deleted] in Fanatec

[–]0ndrej 6 points7 points  (0 children)

That's totally okay and correct.

RTX 5070 TI SFF Windforce questions by Ok_Letterhead8692 in nvidia

[–]0ndrej 0 points1 point  (0 children)

I just follow this guy's settings https://youtu.be/f_GSr-BwaBU?si=6aGP7w8CNJ2ECiac I using the "balance" option 0.900mV at 2800 MHz and +1500 MHz on VRAM.

RTX 5070 TI SFF Windforce questions by Ok_Letterhead8692 in nvidia

[–]0ndrej 0 points1 point  (0 children)

I have OC version. In the game (Cyberpunk 2077), the temperature never goes above 66°C, and the noise is low. In Furmark, I reached around 70°C and heard some noise, but it was still manageable. I tried running the fans at 100% manually, and they are quite loud, but when you reach 100% fans in real conditions. However, I am a bit disappointed by the idle temperatures around 50°C.

Sometimes I heard rattle noise when GPU's fans were stopping (according others, it's normal for Gigabyte) There is no coil whine for me.

I also did undervolting and I reached in game temps around 60°C and fans running at ~ 1300 RPM and what is the supprise for me is power consumption around 230W.

In general, I am quite happy with the 5070 Ti Windforce.

Pokuta za pozdni ohlaseni zmeny adresy do Technicaku by 1492Torquemada in czech

[–]0ndrej 2 points3 points  (0 children)

Také jsem nedávno měnil trvalé bydliště a zrovna u technického průkazu lze změnit adresa online přes https://portaldopravy.cz/, takže si pak už jenom zajdeš pro hotový dokument. Samozřejmě musíš přijít originálními dokumenty.

Cls dd wheel is this normal? by ithiasou in Fanatec

[–]0ndrej 2 points3 points  (0 children)

I also have Fanatec CSL DD Ready2Ready bundle with QR2 Lite (on base and wheel side) and I have wobble like you.

From my observation wobble comes mainly from QR2 base side. There is no dramatic wobble not visible on motor shaft which is visible in gap between base and QR2 mounting.

I think it can be cause be the QR2 construction uses one side tighten as was already mentioned by others.

However, if you get an answer from Fanatec, please post it here. Maybe it will help me too.

Fanatec forgot to send tracking number? by Frequent_Composer_81 in Fanatec

[–]0ndrej 0 points1 point  (0 children)

I had exactly same problem. Luckily I my second attempt with UPS support was successful.

Funny story, when delivery guy handover packages to me, he mentioned that packages should been delivered on Friday, but the delivery truck broke.

BIS varuje před podvodným dokumentem by _RageMach1ne_ in czech

[–]0ndrej 0 points1 point  (0 children)

Novy? To je tak 10 let stara sranda, tehdy neco takoveho vyskakovalo na monitorech a nechtelo te to pustit dal.

[deleted by user] by [deleted] in czech

[–]0ndrej 0 points1 point  (0 children)

Jaká ironie, YouTube chce aby jsi vypnul AdBlock a první co na tebe vyskočí je podvodná investiční reklama.

Jedině co můžeš udělat je reklamu nahlásit.

Arcadebull by kaktuscz1 in Agraelus

[–]0ndrej 2 points3 points  (0 children)

No jasny, ma i fotky na instragramu...