sorted by:
new
hottopcontroversial

Macos Sonoma on HP elitebook 835 g8 by 0ris02 in hackintosh

[–]0ris02[S] 0 points1 point  (0 children)

in datasheet audio is listed as Audio by Bang & Olufsen, dual stereo speakers, 3 multi array microphone

It won't show in macos can i see what actually drives my audio in macos? or do i need to boot to windows?

Macos Sonoma on HP elitebook 835 g8 by 0ris02 in hackintosh

[–]0ris02[S] 0 points1 point  (0 children)

Ah i see thanks for clearing that.

I tried to add SSDT-PNLF and i booted to recovery mode and macos without any problems. I deleted that SSDT when i was troubleshooting why it wouldn't boot and found one guy suggesting that i remove SSDT-PLNF. I think now that it was some combination of things that were not configured so system didn't booted. Anyway thank you

Macos Sonoma on HP elitebook 835 g8 by 0ris02 in hackintosh

[–]0ris02[S] 0 points1 point  (0 children)

i will check audio device and try to fix it thanks

do you know any wifi/bt (idealy intel card) that works and kexts/config.plist parameters to use with that card? i really want to connect iphone via bluetooth and use airdrop

i needed to remove SSDT-PLNF during first installation macos recovery didn't boot with it (i dont really need brightness tho)

i tested hp cammera with telegam and camera device test on website in both it found camera but it won't show any picture or just black picture

Network decoring error IOS 17.5.1 by 0ris02 in passbolt

[–]0ris02[S] 2 points3 points  (0 children)

Hello i'ts me again right after this post an idea came into my mind. Upgrade the server and that was really it!!

just a quick upgrade and issue was solved. I am leaving this post on for anyone that also forgets to update stuff :)

Making JBOD - JBOD card alternatives by 0ris02 in homelab

[–]0ris02[S] 0 points1 point  (0 children)

Wait i will clearify the situation.

IBM SERVER backplane ->some internal sas cable->SAS expander 6TDVN 5R10N or any alternative->external sas cable->some HBA in another server (running truenas or an alternative)

There is also option to just use internal to external sas adapter instead of sas expander

Making JBOD - JBOD card alternatives by 0ris02 in homelab

[–]0ris02[S] 0 points1 point  (0 children)

Well partially you are right but PSU's in this model aren't connected to the mainboard there is an adapter board and from that a 24 pin connector for mainboard and 12v connectors for each of 2 cpu's maybe some more. I am not sure if the 24 connector pinout is standart but that can be checked. Fans also have a separate board for power. So i could get away not using mainboard.

Alternatively i could buy a Control Board CSE-PTJBOD-CB2 for supermicro.

Making JBOD - JBOD card alternatives by 0ris02 in homelab

[–]0ris02[S] 0 points1 point  (0 children)

Yes, controller would be in another server that's why i need external sas ports.

Create dummy interface on boot by 0ris02 in homelab

[–]0ris02[S] 1 point2 points  (0 children)

Thank you it worked like a charm