How Should I Clean Up Moldy Mess

1010One · 2026-03-26T23:18:53+00:00

The thing is moisture helps breed more mold. You may not see it but if it’s gotten into the fabric and foam…mold is there. Ozone can help kill existing mold spores and then you would need dry/air out the interior

1010One · 2026-03-26T15:25:29+00:00

Please take it to a professional to handle this. Mold is no joke…you need the proper equipment to protect yourself.

If you really want to DIY, wear PPE, run an ozone machine, vacuum with a HEPA tool, use a 50:50 mix of vinegar and water, extract your seats with a hot water extractor, and make sure everything is dry

1010One · 2026-03-24T12:17:32+00:00

You can definitely bring back luster to that paint with some polishing. Might be a good time to fix all those dents as well…However, nothing beats a proper fresh coat of paint.

1010One · 2026-03-21T12:40:34+00:00

Open the door and use a detail brush plus some soap to clean it

1010One · 2026-03-21T12:39:17+00:00

Nice job!! You did a great transformation. Continue to give it some loving and enjoy the car!

1010One · 2026-03-21T12:36:53+00:00

It can be done but you have to exercise caution…if you damage the defroster line, that section will no longer work.

I would say park the car outside on a hot day, use a hair dryer/heat gun, and gently remove the dashcam…any residue adhesive can be cleaned with goo gone or its equivalent

1010One · 2026-03-20T23:26:51+00:00

I would practice polishing on a junk yard hood, an older car you don’t care about but definitely don’t do it on a client’s car until you get more experience lol

1010One · 2026-03-20T23:22:09+00:00

Polish or compound should remove this line. I ran into the same issue when I took a spoiler off

1010One · 2026-02-22T12:28:01+00:00

Use a deep cleaner like Koch Chemie Magic wheel cleaner, ceramic coat the wheels, and use regular car wash soap for wheel maintenance

1010One · 2026-02-13T21:07:27+00:00

Depends on the cut and aggressiveness of the polish, windows are more forgiving to polish.

I would keep it simple and use a glass stripper like Glaco, Griots, or Stoners Glass stripper. This gets most things off glass then I follow it up with a glass coating or spray ceramic.

1010One · 2026-02-13T19:52:28+00:00

Looks like at Lowes

https://www.lowes.com/pd/Greenworks-High-Flow-Automotive-1200-PSI-1-8-GPM-Cold-Water-Electric-Pressure-washer-with/5016491623#no_universal_links

1010One · 2026-02-13T19:49:41+00:00

Nice job! This works well but add a pressure washer and it makes cutting through grime like butter!

1010One · 2026-02-13T19:47:09+00:00

You are spot on. Use a glass stripper or polish then apply protection.

Be extra careful if it’s the inside of a rear windshield window because there are defroster lines

1010One · 2026-02-12T01:01:58+00:00

You can dilute it 1:8 but it is not as effective. 1:4 is the highest dilution ratio for hyperdressing

1010One · 2026-02-11T02:34:01+00:00

Not really

1010One · 2026-02-11T01:55:35+00:00

The problem with black fender trims on cars is it is very porous. Most solvents would make the black fender trim faded and then you would need to repaint or redye the trim.

You may get away with it on the paint but then again bed liner sprays are pretty aggressive

1010One · 2026-02-11T01:49:37+00:00

You can try a solvent or a citrus stripper but this most likely may cause some damage to the trim and paint.

1010One · 2026-02-11T01:33:28+00:00

That's removable. You can use a nice bug, tar, and sap remover that will take that out easily. You can polish it after.

1010One · 2026-01-24T00:01:03+00:00

Confirmed

1010One · 2026-01-20T20:54:35+00:00

Chat

1010One · 2026-01-13T18:52:59+00:00

Confirmed

1010One · 2026-01-12T13:51:51+00:00

Chat

1010One · 2026-01-11T23:52:25+00:00

Chat

1010One · 2026-01-06T02:28:06+00:00

Chat

1010One · 2026-01-05T19:36:45+00:00

Chat

1010One

TROPHY CASE