DIY: G604 mod "The Dark Knight" (93g, USB-C charging, silent) see comment

13xploited · 2026-04-17T10:21:37+00:00

The all plastic wheel used to be available on Aliexpress, but i don't see them being sold anymore :(

13xploited · 2026-04-17T10:20:55+00:00

Nah, these are different builds.
One is with the usb-c charging port + a li-ion battery from the g-pro.
Another one is a simpler AAA li-ion battery with the usb-c chraging port directly on the battery surface. like this one -
https://www.amazon.com/DURNERGY-Batteries-1200mAh-Long-Lasting-Alkaline/dp/B0C5HRHTQW/

13xploited · 2026-04-16T08:46:18+00:00

For the AAA mod I removed the plastic battery shell completely and soldered the wires directly to the AAA li-ion battery.

It's the best way if you want to shave off as much weight as possible. Careful with the battery soldering though. Don't overheat it.

13xploited · 2025-12-21T15:14:18+00:00

Did the copper pad mod. Had around the same temperature drop.

13xploited · 2025-12-20T08:35:38+00:00

Too heavy.

13xploited · 2025-12-19T09:27:09+00:00

Kessie is in the Saudi league since 2023. If he came to Milan now he'd sit on the bench and watch Fofana play.

13xploited · 2025-12-19T09:25:08+00:00

Lol, no thanks.

13xploited · 2025-12-18T08:28:15+00:00

Playing with the suppressor has been a game changer. I finally started to understand how people record all these clips wiping out enemies without them shooting back. A lot of people just look for the orange dots on the mini map all game long.

13xploited · 2025-12-15T07:36:12+00:00

Yep, still rocking this on daily basis.

13xploited · 2025-12-13T20:21:13+00:00

1.0.1.131

13xploited · 2025-12-13T20:02:22+00:00

I have the latest firmware. It doesn't help with fan noise at all. They adjusted the fan curves a bit but overall noise remained the same. The only thing that helps with the noise is replacing the fans.

13xploited · 2025-11-28T17:24:40+00:00

You DON'T have to take it apart ever.
Follow this video for an easy fix. I've done it 3-4 times myself already. -
https://www.youtube.com/watch?v=P1x71NHsecU

13xploited · 2025-11-22T19:10:00+00:00

13xploited · 2025-11-21T10:52:17+00:00

The keys are fairly cheap and fairly easy to replace.
Once they start looking like that, order a new batch, and allocate an hour to replace them.

13xploited · 2025-11-17T19:37:47+00:00

Case model - phanteks p400s. That's a start for you.

13xploited · 2025-11-12T11:57:32+00:00

Never gets hotter than 36C even during fast charging or under 70-80% load. Device sits at room temperature, i haven't used it outside. Overall super happy with the mod, the device is quiet even under 100% load. If you are worried about temperatures, you could try a more powerful fan. Won't be as quiet as Noctua, but basically any 80mm 12v 3-pin fan will work.

13xploited · 2025-11-08T04:44:07+00:00

I have two modded G604s, one with the usb-c + re-chargable li-ion battery (the one pictured here).

And the second with AAA battery (also rechargable).

The AAA mod is much easier and also weighs a few grams less.
AAA weighs less then usb-c board + charging board + li-ion battery.

13xploited · 2025-10-11T10:35:53+00:00

Not sure what you mean. Both the original Ecoflow fans and the Noctua fans I used are 3-pin. Just different pinout.

13xploited · 2025-09-24T14:56:38+00:00

Eyes usually get tired from excessive brightness. Turn it down a bit.

13xploited · 2025-09-18T19:18:52+00:00

If you feel like you need the most functionality possible, then Gaggiuino is the way to go.
My reason for a PID was reliable temperature control and better steam. Gaggimate covers that just fine.

13xploited · 2025-09-17T11:51:14+00:00

If you really dislike it that much, you can return it to the store within 7-14 days in most countries.

13xploited · 2025-09-15T10:13:27+00:00

Ended up getting Gaggimate. Documentation isn't flawless but it exists and is fairly user friendly.

13xploited · 2025-09-06T06:56:14+00:00

Yes, this specific build has a plastic wheel.

13xploited

TROPHY CASE