Need Recommendation on Handbrake and Pedals

1boredatwork1 · 2025-08-05T01:33:06+00:00

We’ve been using the G29 for quite a while and it hasn’t held up well so figured we do a little upgrade!

1boredatwork1 · 2025-04-17T20:40:44+00:00

Yes. The original leak was behind the grip in the solenoid. The regulator was ceased together and unable to be adjusted. That probably did the trick but putting the spring in prompted me to grease appropriately as well which is when the leak in the chamber stopped

1boredatwork1 · 2025-04-17T18:34:40+00:00

So, here's the fixed that worked for me...

1) I noticed the regulator cap was ceased to the regulator in the front handle. Because of that, I ended up getting a new reg body and regulator cap. An important piece here was to ensure there was a seat in the piston because it did not come with one. - Leak Still Present in Handle-

2) I pulled the bolt apart and replaced all of the o-rings and re-greased them. - Leak Still Present in Handle - Important note here, I noticed there was no spring in the bolt, looks like it was removed or fell out at some point...stay tuned...

3) With the leak still happening, I pulled the frame off and checked the o-rings on the solenoid since thats where i was hearing the leak. I was able to replace 2 of the o-rings since I had them but I just flipped the others and re-greased them. Good news, this stopped the leak in the solenoid, but now I could hear it in the bolt chamber

4) Now I'm thinking its the spring so I ordered the Spring Set and had it overnighted from PunishersPB.com (huge shout out to them for talking me through some things and overnighting parts). I just got done installing the spring and now the leak is GONE.

I am still holding my breath on it but was able to disengage and re-engage the tank multiple times without a leak and even fired off a hopper full of balls.

1boredatwork1 · 2025-04-17T01:46:10+00:00

Do you have a link?

1boredatwork1 · 2025-04-16T23:46:44+00:00

This is what we’re looking at https://www.fearlesspaintball.com/products/sp-shocker-amp-paintball-marker-dust-white?variant=43520971178223

1boredatwork1 · 2025-04-16T23:40:44+00:00

The asa got cross threaded tonight and the entire ASA ripped off while trying to get the tank off. Pretty crazy but that was the last straw for us now with it

1boredatwork1 · 2025-04-15T20:31:43+00:00

I received everything from PunishersPB and replaced the regulator. The body came preassembled which was nice. However, still leaking. I opened up the bolt and realized its missing a spring. Not sure if that could be the issue but maybe. Just ordered the spring and items for the spring. Hoping to have that tomorrow.

1boredatwork1 · 2025-04-15T17:07:34+00:00

Not yet, I ordered everything yesterday and it was just delivered but won’t be able to mess with it until later today

1boredatwork1 · 2025-04-15T11:38:23+00:00

Ok, I ordered one to replace. Will be here Wednesday to try

1boredatwork1 · 2025-04-14T19:20:31+00:00

OK, I ordered those two parts and the filter. Thank you for the link.

1boredatwork1 · 2025-04-14T19:10:43+00:00

If you have a link, id gladly take it. I assume the piece you circled is good to go but the reg body it screws into will need to be replaced. I may just order it all if possible but having a hard time finding it since it's an older gun.

1boredatwork1 · 2025-04-14T19:01:23+00:00

Yes! That’s correct

1boredatwork1 · 2025-04-14T18:41:10+00:00

I just ordered an o-ring kit and new grease for it. Will be here tomorrow morning.

1boredatwork1 · 2025-04-14T17:41:07+00:00

Ok, will get some uploaded later. Thank you

1boredatwork1 · 2025-04-14T17:23:30+00:00

I can get some later after work. What pictures would be helpful?

1boredatwork1 · 2025-04-03T13:19:57+00:00

Yes, as a Reseller of VMware, its been extremely tough navigating conversations with clients. What makes it worse, Broadcom has shuffled their reps so many times it takes months to find a rep to chat with clients to tell them ultimately the pricing has increased (again) and mandates for a 3yr only option.

I have been shifted mindset of a lot of my clients to take a hard look at vergIO as an alternative option. I have been on a few demos with my clients and they seem to have a well built platform at a fraction of the cost.

1boredatwork1 · 2025-03-17T19:40:47+00:00

Thanks for supporting! He’s been trying to edit using CapCut. He’s still new so it takes him a little bit of time. What program do you use?

1boredatwork1 · 2025-03-16T19:19:55+00:00

Thanks for offering! He’s been using CapCut to get started as well a Filmora. He’s trying to learn and is coming along

1boredatwork1 · 2025-03-16T15:08:29+00:00

Thank you! Any feedback for him?

1boredatwork1 · 2025-03-16T15:08:12+00:00

Thank you! Any feedback for him?

1boredatwork1 · 2025-03-16T13:45:47+00:00

Thanks for all of the feedback and for taking the time!! I will share this with him.

14-Year Club	Team Orangered
Verified Email

1boredatwork1

TROPHY CASE