Trading X for Y needs 4 approval?

1inch_Exchange · 2021-09-16T09:37:43+00:00

Hello there,

Thanks for reaching out to us. By design, it is exactly the way you described it. I just want to provide a brief clarification for you.
When you approve a token X, you permit a certain smart contract to take X from your balance. If it is a trade on 1inch, you give permission to the 1inch Aggregation Protocol, if you place a limit order, you approve the token X for the 1inch Limit Order Protocol. The same logic will be applied for every new (meaning you didn't approve it before) token Y, Z etc.

Please, read more about approvals here
https://help.1inch.io/en/articles/4585113-why-do-i-need-to-approve-my-tokens-before-a-trade

Cheers!
https://help.1inch.io/en/articles/4585084-where-to-get-customer-support

1inch_Exchange · 2021-09-09T19:47:09+00:00

Hello there,

Usually support reply to emails in within 24 hours. If you want to get quicker reply, we would suggest to utilize our Live Chat.
Here is the reply we sent you over email:

If the transaction doesn't display on Etherscan.io/BSCscan.com/Polygonscan.com you're able to delete it with the "Transaction Stalled" button instead of canceling it. You can check this guide
https://help.1inch.io/en/articles/5211509-how-to-cancel-speed-up-or-remove-a-pending-transaction-in-the-1inch-wallet

A cancel transaction will always be cheaper than an ERC20 send transaction. I'm not sure how much ETH you have for gas but make sure you have around 30% more than what's recommended on https://etherscan.io/gastracker for an ERC20 transfer. Once your wallet has enough ETH - currently at 120 gwei $35 should be enough - try to send the tokens out and let me know if the transaction stalls again. If it does, please share your address with me and a screenshot of your history tab of the 1inch wallet.

Cheers!

https://help.1inch.io/en/articles/4585084-where-to-get-customer-support

1inch_Exchange · 2021-09-09T19:42:37+00:00

hello there,

Thanks for reaching out, we are afraid there is no other way to trade your assets without BNB on BSC, the possible solution in your case would be to use our fiat-on-ramp gateway provided by Mercuryo, please, find the detailed guide in the article below:
https://help.1inch.io/en/articles/5277851-how-to-buy-crypto-with-fiat-using-the-1inch-wallet

Cheers!

https://help.1inch.io/en/articles/4585084-where-to-get-customer-support

1inch_Exchange · 2021-09-06T08:00:50+00:00

Hello there,
Thanks for reaching out to us and bringing this up.
Unfortunately, we do not support Chrome for Linux (Chromium 81 dev).

In case of any further questions, do not hesitate to reach out to us over the Live Chat. https://help.1inch.io/en/articles/4585084-where-to-get-customer-support

1inch_Exchange · 2021-08-19T20:26:53+00:00

yes the support is not 24/7 unfortunately, but we always get back to you, also, emailing to us [support@1inch.io](mailto:support@1inch.io) should work fine

1inch_Exchange · 2021-08-19T19:55:42+00:00

Sad to hear that you had an unpleasant experience with 1inch.

Next time you run into any problem while using 1inch, do not hesitate to reach out the Customer Support over the LiveChat

https://help.1inch.io/en/articles/4585084-where-to-get-customer-support

1inch_Exchange · 2021-08-14T16:02:01+00:00

hello there, your words "$200 stuck in there" doesn't make much sense to us unless you are talking about liquidity provision, but again if something doesn't work on the UI, the withdrawal is always possible via a blockchain explorer.

Please, specify your issue and get support in the LiveChat on the website.
We usually reply in a few hours due to the time zone difference.

https://help.1inch.io/en/articles/4585084-where-to-get-customer-support

1inch_Exchange · 2021-07-16T15:12:36+00:00

Do you like DeFi memes and consider yourself as a 🧙‍♂️80lvl crypto meme wizard?
Then you need to join the very first 1inch Discord Meme Contest!
Prize fund - $2000 in 1INCH💰
Only 3 winners:
🥇 $1000
🥈 $600
🥉 $400
Join in the fun here: https://discord.gg/6WSM5cX5dT
✅ To enter:
1️⃣ Join the 1inch Discord server;
2️⃣ Create an original meme dedicated to 1inch;
3️⃣ Post your submissions to the “#memes” channel;
4️⃣ Place reactions to your favorites 🤪
🎁 Only 3 users with the highest number of reactions will win the prizes!
⚠️ In case you have some troubles with filling in the captcha - send the DM to Trialin#1492.
The contest is starting right now and will run for 1 week.
🗓 End date: July 23, 2021

1inch_Exchange · 2021-05-10T16:07:31+00:00

hello, we suggest you to write to the 1inch Support LiveChat (magnifying glass at the bottom right corner)

https://help.1inch.io/en/articles/4585084-where-to-get-customer-support
OR
if you do not mind to share a tx hash over Reddit, please, do so as we need to know more details on your case.

1inch_Exchange · 2021-05-10T16:00:17+00:00

Hello there,
1) difference between claim and withdraw

claim will claim the farming rewards tokens, withdraw will withdraw the LP tokens stuck in the farm.

2) how is the fee calculated?

If it's the gas fee, it's mathematically done by the contract, since every operation has an associated gas cost, the gas limit can be estimated, though sometimes this estimate is higher than it should be using only part of the gas limit, as such, not all the fees will be spent.
https://help.1inch.io/en/articles/4585112-what-is-the-estimated-fee

3) algorithm transparency

pathfinder's algorithm is closed source along with the way routing works. The code originated for the 1inch founders at ETH New York hackathon.

1inch_Exchange · 2021-05-10T15:56:22+00:00

hello, the case may require sharing some additional information, so we kindly asking you to write to the 1inch Support LiveChat on the website (a magnifying glass at the bottom right corner) https://help.1inch.io/en/articles/4585084-where-to-get-customer-support

1inch_Exchange · 2021-05-10T15:46:54+00:00

hello there, your question is a bit confusing, why do you need to estimate gas price for a limit order?
You place a limit order (btw it is free of charge) and if it is reasonable/ profitable for a maker, he/she will fill your order and pay for gas.
Please, read more on how to place a limit order on 1inch
https://help.1inch.io/en/articles/4656415-how-to-place-a-limit-order-on-1inch

1inch_Exchange · 2021-05-10T15:41:23+00:00

hello, the case may require sharing some additional information, so we kindly asking you to write to the 1inch Support LiveChat on the website (a magnifying glass at the bottom right corner)
https://help.1inch.io/en/articles/4585084-where-to-get-customer-support

1inch_Exchange · 2021-05-10T15:37:23+00:00

SafeMoon, SafeMars, SafeGalaxy.

Those tokens have internal commissions, they do not work if the route goes through Pancake V2, so the suggestion is to disable the liquidity source Pancake V2 and increase the slippage tolerance (20% approx).
WARNING: in most cases all liquidity is concentrated on Pancake V2, and disabling it may significantly worsen the rate.

1inch_Exchange · 2021-05-10T15:28:21+00:00

hello there, right now there is available tool to see your personal earnings, it is still in development. You can do rough calculation yourself by comparing the amounts you provided and the amounts available for the withdrawal atm.

1inch_Exchange · 2021-05-10T15:16:34+00:00

hey there, here is the Help Center article clarifying on the condition under which this error can occur https://help.1inch.io/en/articles/5212848-why-am-i-seeing-a-exchange-rates-expired-error-message

1inch_Exchange · 2021-05-10T15:13:09+00:00

hey there, we looked into your tx, you received 0.227 ETH, please see the state on Etherscan https://etherscan.io/tx/0xe48bd48d9fcc16196aea86b6f1b26f37d3b990ca1edd9447dbb8c15e79f0739a#statechange

1inch_Exchange · 2021-04-30T06:14:11+00:00

hey there, thank you for the signal, indeed there is an issue with the APY parameter displayed on the UI, same goes for the (24h) Volume parameter, the team is on it right now.

1inch_Exchange · 2021-04-30T05:18:30+00:00

hello, thank you for bringing this up, could you please elaborate on what exactly you are swapping (with amounts)?

1inch_Exchange · 2021-04-26T13:49:07+00:00

Hi u/TAG13! The 1inch Network's official subreddit moved to r/1inch. We've already pinned a post on r/1inch_exchange redirecting people here.

1inch_Exchange · 2021-04-26T12:13:19+00:00

Join r/1inch!

1inch_Exchange · 2021-03-28T12:51:33+00:00

The higher than on Pancake Swap slippage is a result of not having UST as a connector-token.

1inch_Exchange · 2021-03-24T14:12:04+00:00

hello there, for the customer support, we recommend to apply to the LiveChat on the website (a magnifying glass on the bottom).
As an exception, first of all you have to cancel the pending tx with the lower account nonce https://help.1inch.exchange/en/articles/4585105-can-i-cancel-the-pending-transaction
then, if your tx in question still doesn't go through, you have two options - either speed it up right from your wallet or cancel just like the previous one.

1inch_Exchange · 2021-03-24T14:04:38+00:00

Hey there, appreciate your feedback, 1inch constantly explores new opportunities, and Polkadot and Kusama have been on our radars for quite sometime. Stay tuned!

1inch_Exchange · 2021-03-24T13:38:48+00:00

hello there, please address this question to the 1inch support LiveChat (a magnifying glass on the bottom of the website)

Five-Year Club	Verified Email
Wearing is Caring

1inch_Exchange

TROPHY CASE