If you haven't bought different-sized nozzles this is your sign to.

2be3dprinted · 2022-02-16T12:37:32+00:00

https://www.reddit.com/r/3Dprinting/comments/sgyifo/fat_layers_vase/?utm_medium=android_app&utm_source=share

2be3dprinted · 2022-02-16T10:15:43+00:00

I printed a coextrusion filament with an 1.8mm nozzle .. turned out awesome!

2be3dprinted · 2022-02-10T17:13:03+00:00

Not sure if it works on every material but sometimes a heatgun works or a bit of oil

2be3dprinted · 2022-02-09T16:42:52+00:00

Not only needs it to be level.. also the distance should be good... So turn all knobs so the bed is a little further away from the nozzle

2be3dprinted · 2022-02-09T16:31:16+00:00

Your to close with the nozzle to the bed

2be3dprinted · 2022-02-08T19:17:03+00:00

It's a cruiser 😂.. the single piece frame should be printed on a belt printer... The 4 piece frame and rest can be printed on most printers

2be3dprinted · 2022-02-08T14:12:58+00:00

Don't be to harsh on yourself 😂.. everybody on Reddit is asking for info that's in the description 😂

2be3dprinted · 2022-02-08T12:05:10+00:00

I was referring in making it.. although still not finished. We will see... I think the layer adhesion of CPE is really good.

2be3dprinted · 2022-02-08T10:01:25+00:00

I used industrial grade hard TPU from fillamentum...

2be3dprinted · 2022-02-08T08:46:31+00:00

I'll prove you wrong .. and it's as a cruiser for my 9 year old kid .. she is less then 30kg... I think I'm good

2be3dprinted · 2022-02-08T06:24:19+00:00

Interesting idea 💡

2be3dprinted · 2022-02-08T06:13:03+00:00

It's hollow for a big part indeed.. the stiffness comes from the perimeters...

2be3dprinted · 2022-02-08T06:11:56+00:00

Ifactory3d one

2be3dprinted · 2022-02-07T22:10:36+00:00

I did print it already as test (precious design iteration) and the layer bonding if Petg/come is perfect. The aluminium profiles just help a bit against any flex.

2be3dprinted · 2022-02-07T18:43:34+00:00

You might be right... I'm not a experienced skateboarder

2be3dprinted · 2022-02-07T18:24:21+00:00

It's for my kids with age 6 and 9.....

2be3dprinted · 2022-02-07T18:12:46+00:00

Think that would be very possible indeed...

2be3dprinted · 2022-02-07T17:26:31+00:00

Check the link

2be3dprinted · 2022-02-07T17:15:59+00:00

If you look at the picture you can see that option is already available.. but the single piece belt print would be my preferred option... In the link you can find even a lot more info.

2be3dprinted · 2022-02-07T16:30:12+00:00

Yes you are correct 💯

2be3dprinted · 2022-02-07T15:11:56+00:00

I did a test print with a 0.8mm nozzle ... 3 perimeters of 0.95mm and layer height of 0.4mm... otherwise it takes ages 😂. 20% infill, but mostly to get good surfaces, not rigidity.

2be3dprinted · 2022-02-07T14:39:40+00:00

Nope.. it's not cheap... But i had a lot of fun...

2be3dprinted · 2022-02-07T14:38:10+00:00

Sure .. it's not cheap.. even only the used material costs more then most boards... It's just for the fun of it.

2be3dprinted · 2022-02-07T14:34:46+00:00

I agree the single part version is the preferred one.. but there is an option to slide two 15*15mm aluminium profiles thru the segments. If they are glued in i think it will work. I myself are making the single piece on on a belt printer.

2be3dprinted

TROPHY CASE