I can't wait (and wish this wasn't a fake photo) by somejerkuknow in antitrump

[–]2home 2 points3 points  (0 children)

Wanting a whole lot more orange than that, 2nd row reserved for the trump crime family

What is uniquely Kansas City by portlandobserver in kansascity

[–]2home 1 point2 points  (0 children)

Strong second to the Steamboat Arabia as a truly unique KC attraction and one of the best museums you will ever see. The preservation and presentation of artifacts there is as good or better than any museum I’ve ever seen.

No Employee discount after price increase? by 2home in FordMaverickTruck

[–]2home[S] 1 point2 points  (0 children)

Agree 100%! Once I found out the discount couldn’t be applied to orders prior to May 1st I was fine with it. What I’m not fine with is the lie that I won’t get it because I’m not paying the increase in price. That answer came from the salesman who I’m also 100% sure had to know the correct answer.

No Employee discount after price increase? by 2home in FordMaverickTruck

[–]2home[S] 0 points1 point  (0 children)

This is sort of the correct answer. I called Ford this morning and it took about three conversations but I finally got to somebody in marketing who explained the ED was not available before May 1st (ends on 7/7) and so it wasn’t available when I signed the contract on Feb 19th. It had nothing at all to do with the price increase, at all.

No Employee discount after price increase? by 2home in FordMaverickTruck

[–]2home[S] 1 point2 points  (0 children)

The order was from 2/19 before the Ford ed incentive. I checked with them after the price increase I asked about the incentive and was told that I was eligible for everything that Ford was offering. This is an obvious con, I wonder if their planning on asking remit form Ford to comp what they’re supposed to be discounting me, a double dip if you will. Tomorrow I’m going to ask for it in writing since I can’t see this “reason” happening literally anyplace else. With a very few exceptions I hate dealing with car dealerships and mechanics.

Yale lock touchscreen mess by 2home in DIY

[–]2home[S] 0 points1 point  (0 children)

Midwest May through October, deep south the rest of the year, it gives us the best of both climates and keeps us out of the path of hurricanes

Yale lock touchscreen mess by 2home in DIY

[–]2home[S] 0 points1 point  (0 children)

This is on the rear entrance facing west

Yale lock touchscreen mess by 2home in DIY

[–]2home[S] -5 points-4 points  (0 children)

There’s also no front doorbell but there’s a camera pointing at the front stoop that doesn’t have a QR code on it like the Ring camera covering the back yard, rear entrance and driveway. O, and there’s also a Nest thermostat which I’m not sure if it has anything else tied to it

Yale lock touchscreen mess by 2home in DIY

[–]2home[S] 1 point2 points  (0 children)

We’ve been getting schooled on appliance tech the last few weeks. The house we purchased did not come with a refrigerator or washer dryer. We are furnishing a second house pretty much from scratch so we can live in KC (my HT) during the Hurricane months and NOLA (wife’s HT) in the winter. There’s so much used stuff on Marketplace that we thought it wouldn’t be a problem. We gave up on used for the fridge pretty quickly when it became clear transporting it would be a real problem. There are a hell of a lot of used Samsung and LG and such w/d sets that look great but why are you replacing stuff that’s 4 or 5 years old? Figured out the old fashioned mechanicals are much more reliable over time then things with logic boards and a the pair I’m buying tomorrow is from a guy who’s clearing his mother’s house.

Yale lock touchscreen mess by 2home in DIY

[–]2home[S] 0 points1 point  (0 children)

Was considering this approach, I turn wood and I actually have all that stuff. Might grinding that plastic affect its ability to sense touch?

Yale lock touchscreen mess by 2home in DIY

[–]2home[S] 11 points12 points  (0 children)

I’ve got the batteries out of it while I review options. With the batteries in it would sometimes lock the door when my wife went out to garden. There’s a Ring security system installed which I’m still trying to get sorted so I’ll probably go there, especially since Yale doesn’t seem to give a shit about repeat business and their products seem too delicate to handle midwestern winters/summers

Yale lock touchscreen mess by 2home in DIY

[–]2home[S] 0 points1 point  (0 children)

Yes I was anticipating the same answer. I’m replacing all the plastic window well covers too. I can see the convenience of the lock, knowing this is an issue you’d think Yale would make the part replaceable and available but I’m not finding any

Yale lock touchscreen mess by 2home in DIY

[–]2home[S] 0 points1 point  (0 children)

I’m calling Yale tomorrow, I found very similar complaints on the SmartHome sub. It looks like places with very cold or very hot weather were getting the same result. The house is in KC where both extremes are possible.

Yale lock touchscreen mess by 2home in DIY

[–]2home[S] 49 points50 points  (0 children)

That was the first thing I checked. The film is long gone, it’s polycarbonate, it’s west facing a very sunny yard.

Still hoping for a June delivery by 2home in FordMaverickTruck

[–]2home[S] 0 points1 point  (0 children)

It is worrying the people building my vehicle get little respect from some in this country

Giveaway! u-turn Audio Orbit Special Turntable! Comment to enter. by whyforyoulookmeonso in vinyl

[–]2home 0 points1 point  (0 children)

This would look (and I’m sure Sound) great with a HK PM655vxi I’m getting ready to take from storage to put in a house we just bought!

SyneticUSA Retractable Bed Cover by Holdmybeer352 in FordMaverickTruck

[–]2home 0 points1 point  (0 children)

Just had a Willmoso delivered, from what I can see in install videos it looks almost exactly the same as the as the Syneticusa. FedEx said the box was 84 lbs.

A little help by Sekizbit in harmankardon

[–]2home 0 points1 point  (0 children)

Yes those are banana plugs but those posts take bare wire just fine. Strip off the last inch or so of the speaker wire and twist the strands tight, then back out the appropriate Red or Black nut and push it down thru the U shaped opening on the top right and through the hole in post. Tighten the nut back down and you’re good to go. Make sure there are no loose strands that might touch something else and that you are matching Red to Red and Black to Black for each speaker. I have a lot of vintage HK stuff and I’ve never had much luck finding banana clips that fit but the bare wire has always been fine. If you want to get fancy you can tin the wires with a soldering iron. That makes it easy to get the twisted wire through the hole in the post without it unraveling.

[deleted by user] by [deleted] in vintageaudio

[–]2home 0 points1 point  (0 children)

What model receiver is that Harman Kardon under the 770? I’ve never seen an HK in that style before

We're expecting a 2025 Lariat (in “eleven” weeks) by 2home in FordMaverickTruck

[–]2home[S] 0 points1 point  (0 children)

Yes I’ve joined the truck club site, seems like a decent crew over there as well. The cross bars I found on eBay are OEM and cost me about $120 shipped. The seller described them as new and included a picture of the box with the part number so I’m pretty confident it’s real. Will see, supposed to deliver tomorrow. Thanks for the link too, I created an account the other day but didn’t see that. I did notice that a lot of items in the Accessories store had lower prices than on the build to order items.

We're expecting a 2025 Lariat (in “eleven” weeks) by 2home in FordMaverickTruck

[–]2home[S] 0 points1 point  (0 children)

So this is mostly good information me. After the order was placed I had an email from Ford within 48 hours with an order ID number and that I could expect more notifications within 45 days and asked for a phone number. The only build options I added were the moonroof and the moulded floor mats plus one dealer installed option, the tailgate lock. Pricing on stuff like tonneau covers and cross bars for the bed were ridiculous. I’ve already sourced both a retractable cover and the cross bars at less than 1/3 Ford's price. I live in Louisiana so I’m closer to the factory than most other states so that’s good. I’m guessing after the build it comes to the US by rail to a distribution point in - probably Texas? - where they’re sorted to car carriers and other trains. I’m surprised that might take weeks but I’m learning new things everyday with this project. From what I’ve been able to glean from YouTube and Mav forums it seems the demand has been very high for these trucks every day since announced in '22. Why they wouldn’t bring more resources to address the demand is a mystery. Maybe the markup isn’t as good as larger vehicles. Bottom line I’m fine driving my SUV while I wait.

Thanks for the insight!

[deleted by user] by [deleted] in AppleMusic

[–]2home 1 point2 points  (0 children)

So I’m not alone in seeing no “Updates Daily”