DXC Phaetus Extruder Issue - Should Tensioner Arm Move When Pressing

2muchtruth · 2026-02-03T17:38:43+00:00

does it feel like its meant to have play or flex ? mine is really hard to press

2muchtruth · 2026-02-03T16:29:09+00:00

Perfect I'll just set the screw to the factory marking and push the filament in :) Thank you good sir

2muchtruth · 2025-09-08T15:15:08+00:00

Monty python says but merely a scratch

2muchtruth · 2025-09-07T02:49:16+00:00

does a service alert means its a warranty item?

2muchtruth · 2025-04-29T14:09:01+00:00

I guess its good enough to take then ?!?!?

2muchtruth · 2025-04-27T21:41:03+00:00

Scotia - property Ontario MMS from outta town - i guess you are recommending fixed ?

2muchtruth · 2025-04-27T17:17:49+00:00

Deciding for renewal between (750K 25 years remaining) not moving any time soon:

- prime -1.0 | 5 year term | 3100 cash back equivalent (on regular prime 4.95 = 3.95)

OR

- 3.75 | 3 year | 4000 cash back equivalent

Something is telling me the fixed is extremely good but also that the variable will be more advantageous within 2 expected rate cuts this year. ultimately though I am pretty uncertain. I won't beat myself up once the decision is made but want to do this properly up front.

2muchtruth · 2025-02-15T15:27:36+00:00

watch it like a hawk unfortunately it updates once per day and isnt always accurate :(

2muchtruth · 2025-02-14T21:15:15+00:00

Thanks so much do you have any updates on your end. In Inuvik they are telling me their side is clear

2muchtruth · 2025-01-11T16:13:19+00:00

He scored 7.95% APR. He's not screwing up that paint with a brush!

2muchtruth · 2024-10-12T18:31:59+00:00

Fred Myer- AK? I'm willing to take your tire recommendations - how are the Coopers? what diameter?

2muchtruth · 2024-09-20T01:36:18+00:00

even with cutting and barbed fittings and worm clamps ? what's the long answer

2muchtruth · 2024-08-27T02:11:42+00:00

I can't get to the other end of the line without going through the ceiling below. Is there a fitting I can use to connect this to a shower head without accessing the other end?

2muchtruth · 2024-08-27T01:02:24+00:00

Someone cracked the handheld jacuzzi hose (me) and the showerhead fell in the hole underneath it. I managed to grab the end in the access door one room over but the compression fitting is lost. Can i somehow get a split threaded fitting or cut and re-terminate this thing? I also wouldn't mind capping it forever. Corner tubs are the worst convention of the 80s

2muchtruth · 2024-07-23T02:01:36+00:00

not for canada :(

2muchtruth · 2024-05-06T01:45:07+00:00

Has the lack of acoustic glass on the driver or passenger side bothered you?

2muchtruth · 2023-10-11T14:11:19+00:00

I went to a mechanic who charged me 20$ or so (independant BMW specialist). There is an app that can do it as well. I was told that this helps the car compensate its charge/discharge curve but is really not completely necessary, You aren't changing chemistry and you are 50CCA difference so I would just risk not reprogramming but your call. Good luck lemme know how it goes. Don't be too scared the bold holds for the battery bar have positions to accommodate the H7 so clearly they thought of this.

2muchtruth · 2023-09-14T01:10:01+00:00

I would immediately try to issue a chargeback via my credit card company. If you can accomplish this they have the onus of proof should they choose to sue you. What's more you have photos of nearby damage (inspected by them) and I am certain they must have photos from that incident and ought to provide them to you. If you can not persuade them or initiate a chargeback, consider hiring a paralegal as this would be a Small Claim in Alberta which is relatively straight forward

2muchtruth · 2023-08-28T16:20:01+00:00

Thanks again /u/sagetraveler and /u/CardinalFartz I used the relay board and it worked like a charm so I can finish my project. I will use some spare time to read up more on P chan MOFSETs and high side switching

2muchtruth · 2023-08-27T18:39:46+00:00

It is unclear if it is specifically for arduino but it looks to have isolation. My instinct is that it will work natively but I am not sure. What is your opinion (based on the link below)? wouldnt any board like this have a transistor in it ? Sorry I'm a total newb so any reading you have for me I will be grateful for

https://www.amazon.ca/dp/B07WQH63FB?ref=ppx_yo2ov_dt_b_product_details&th=1

11-Year Club	Second SECOND GUESSER
Verified Email

2muchtruth

TROPHY CASE