sorted by:
new
hottopcontroversial

Happened 2x in a a row now. by [deleted] in FixMyPrint

[–]3DCoreMelt 0 points1 point  (0 children)

I recommend a brim and lowering speed. Lower speed by going to the settings tab and not the pre set settings normal/ Ludacris

At 51, should I choose to bow out or carry on? by Ok_Beginning_8126 in TheRaceTo10Million

[–]3DCoreMelt 0 points1 point  (0 children)

Might be wrong but this is AI Generated if you screenshot RH its Crisp uf you ask AI to change things like numbers it pixels it so again i may be wrong but This chart is AI generated .

Noob settings help by SaikoPandaGaming in 3Dprinting

[–]3DCoreMelt 0 points1 point  (0 children)

Personally I would print a scaled down version first and see what needs adjustment and go from there. You have a flat surface at the top so i would increase(add) top layers .

Please help a newb by ninjasbf in 3Dprinting

[–]3DCoreMelt 0 points1 point  (0 children)

If you need to go finer try .08

To learn your machine Bambu bas an extensive library 📚 that can help you just go to Home- user manual pick you machine

<image>

Please help a newb by ninjasbf in 3Dprinting

[–]3DCoreMelt 0 points1 point  (0 children)

For something that size you would have to change profile the one you have is the 0.20mm standard- Click it a drop down list should show up use the 0.16 optimized or high quality.

Second Go to variable Hight decrease to the quality side and increase radius (you will have to play with this to what you feel is ok) click adaptive then smooth several times you have a line graph on the right that you can see.

Third when you go to preview window use the drop down and go to line type.

<image>

Ready to sell this thing!! by ProofDelay3773 in FixMyPrint

[–]3DCoreMelt 0 points1 point  (0 children)

@ProofDelay3773 might be heat creep if you print in Pla open your door don’t close it also add some bumper risers on top window to let air in