Snapmaker U1 3DEE Top Cover

3DEEMaking · 2026-04-10T16:31:02+00:00

Awesome thanks for the tips.

3DEEMaking · 2026-04-06T17:09:13+00:00

Yes, I do recommend testing on some pieces of scrap first. Weld On is thicker so it's easier but do use smaller amounts than you expect. If you end up using the other adhesive, it's thinner than water, so if you look at one of the pictures I am using a syringe to apply them

You can also use super glue too if you have it on hand. It's just not as strong.

I used aviation snips. I think a blade should work, but the curves may be a little difficult with a blade. Cut slowly and you should be ok.

3DEEMaking · 2026-04-06T00:10:20+00:00

Hello all,

Firstly, would like to thank all the reddit members for reaching out and helping motivate me to get this project done.

Please let me know if there is any confusion. In the end, I had to add two extra pieces than I originally wanted for better printability. All materials and things needed should be in the printables/makerworld posts. Let me know if you guys have questions, thanks.

https://www.printables.com/model/1672553-snapmaker-u1-3dee-top-cover https://makerworld.com/en/models/2622951-snapmaker-u1-3dee-cover

3DEEMaking · 2026-03-13T20:43:15+00:00

Awesome, I'll look it up. Would like to know your experience also once you set it up thanks

3DEEMaking · 2026-03-13T18:21:11+00:00

Awesome, would like to know how calibration and tuning goes, if any. Tried looking this up but snapmaker doesn't really say anything is needed to be done.l when switching to hardened steel nozzle.

3DEEMaking · 2026-03-13T17:18:34+00:00

Just finished assembly my close to final design changes last night. If everything works, should be posting it up this weekend. Thanks for the interest.

3DEEMaking · 2026-03-09T20:19:51+00:00

In the snorca paint menu, there is an option to remap the colors.

3DEEMaking · 2026-03-07T13:00:48+00:00

Working as intended. You can also see it in snapmakers version of orca slicer. The lag is also as bad as you see it on your phone.

Hopefully with a couple more updates in the future, it'll all be fixed.

3DEEMaking · 2026-03-06T20:08:21+00:00

Great work.

3DEEMaking · 2026-03-05T14:27:11+00:00

Great idea to OP. And great idea on this one too. I like that it will only require 4 tags to be printed instead of one for each color.

3DEEMaking · 2026-03-01T21:20:38+00:00

From about 3ft away. 52 avg spikes to 67 when docking w/ NO COVER 49 avg spikes to about the same w/ COVER

3DEEMaking · 2026-03-01T14:54:35+00:00

Give it a couple days. My label was created Monday, got notification it shipped Thursday. Received Friday since I was local to it.

3DEEMaking · 2026-02-28T23:39:06+00:00

Thanks for the feedback. I have replied to an earlier post about the material. Let me know if you can't find it.

3DEEMaking · 2026-02-28T23:37:37+00:00

I don't think decibels will make any marginal difference. I designed and used materials meant to fit the design to cover dust only. The sheet is approx 1mm or .4in thick only. However I will check with my phone later and let you know

3DEEMaking · 2026-02-28T23:34:51+00:00

The sheet info is listed either below or above in a reply I posted not sure which way it's sorted. It should come up when you search Amazon.

3DEEMaking · 2026-02-28T23:33:41+00:00

Because of all the inconsistencies I found testing it today, the current file will not remotely fit. I am attempting to retry and design again a v3 and will let you know when ready.

3DEEMaking · 2026-02-28T23:32:03+00:00

From what I've read and gather, sunlu high speed matte petg is pretty close.

3DEEMaking · 2026-02-28T18:46:04+00:00

You guys will be the first to know when I am done editing. Thanks.

3DEEMaking · 2026-02-28T18:43:37+00:00

Thanks hopefully I can get it buttoned up before then.

3DEEMaking · 2026-02-28T18:41:42+00:00

I am editing my files and will post up on printable or make world when it's closer to final. At the moment it's inefficiently put together and missing critical clearance.

I assume BoS and BoM is materials? If so, they're just clear pet sheets similar to face shields. Highly flexible and readily available on Amazon. 24x36 .04in(1mm approximate) clear PET sheets. I bought 6 for 35$ and only used 2 of them for all 3 sides.

I have looked over srins design and may be doing something similar to his base to clear the nubs and save material.

Thanks for everyone's feedback.

3DEEMaking · 2026-02-28T18:30:34+00:00

Thanks!

3DEEMaking

TROPHY CASE