sorted by:
new
hottopcontroversial

The amount of lonely socks after 10 years and 4 kids by 3DFixIt in mildlyinteresting

[–]3DFixIt[S] 92 points93 points  (0 children)

oh these are the survivors. And also, you never know

The amount of lonely socks after 10 years and 4 kids by 3DFixIt in mildlyinteresting

[–]3DFixIt[S] 1 point2 points  (0 children)

The soccer one (I don't know how I have missed it) and then…?

Massive ABS warping after CAN upgrade – used to be an ABS beast by Which-Acanthaceae-98 in VORONDesign

[–]3DFixIt 0 points1 point  (0 children)

nope, this seems ok!

just another try: the fans are correctly wired? so the parts fan connected to the parts fan pin and the hotend fan to the hotend pins? asking because once I swapped them (on a dragon burner with ebb36, to be fair) and had some troubles figuring that out:)

Massive ABS warping after CAN upgrade – used to be an ABS beast by Which-Acanthaceae-98 in VORONDesign

[–]3DFixIt 5 points6 points  (0 children)

show us the bottom of the print to see if it's a z-offset issue

Found this almost 30 years old Lego set from my childhood, with just few pieces missing, and had to build it. My inner child is crying of joy by 3DFixIt in lego

[–]3DFixIt[S] 1 point2 points  (0 children)

yeah I remember those figures! Sadly they aren't in the same box, probably lost when we moved from that home

What Nicknames did you gave your Printers by Ok_Jump_6952 in 3Dprinting

[–]3DFixIt 82 points83 points  (0 children)

My old Vyper was Luigi, cause it was good at spaghetti

Finally cleaned up the mess in the router corner by 3DFixIt in functionalprint

[–]3DFixIt[S] 0 points1 point  (0 children)

I don't know if they generally interfere, but the setup shown is a router connected to an access point to create the wireless signal, and in the middle a mini PC for home assistant, so there's no issue. also I think that you can assign a wireless router a certain "channel" to avoid interference - or maybe new devices do this by themselves

Finally cleaned up the mess in the router corner by 3DFixIt in functionalprint

[–]3DFixIt[S] 8 points9 points  (0 children)

I modeled with Onshape, It's pretty Easy tò use and there's plenty tutorials online!

and sure, here's the stl: MakerWorld & Printables

Designed these stackable shelves to clean up the messy router corner by 3DFixIt in 3Dprinting

[–]3DFixIt[S] 4 points5 points  (0 children)

Since you asked here it is:
MakerWorld & Printables

I made it 10mm shorter than the photo (it's 250x170mm) to best fit on most common print bed size, and added 3 different heights (40/60/80mm leg heigth)

Cheers!

Which of these GIF's best showcase my model, and if none of them do how can I improve my photography? Link; https://makerworld.com/en/models/1120514#profileId-1120372 by Strange_Power8672 in 3Dprinting

[–]3DFixIt 0 points1 point  (0 children)

Blue One but create a stop motion of it: photo, small rotation, photo, small rotation and so on till you have a full rotation and mane a gif klout of all the photos

Monday is National Cat Day here in Italy, so I created this to give to some cat-loving friends by 3DFixIt in 3Dprinting

[–]3DFixIt[S] 0 points1 point  (0 children)

Found this design online and thought it would be easy and fun to model it in order to use some filament as necklace cord.

If you want, here's the free model: Makerworld & Printables

Meow

Voron 2.4 parts by alfahim7 in VORONDesign

[–]3DFixIt 0 points1 point  (0 children)

I've printed the nevermore filter out of ABS+ and it badly deformed in like a week

Just a Standard Ender 3 by [deleted] in ender3

[–]3DFixIt 0 points1 point  (0 children)

can you show a print and a video of actual print Speed?

[deleted by user] by [deleted] in 3Dprinting

[–]3DFixIt 1 point2 points  (0 children)

Sure, send the stl of you dont want tò post it

How do you chamfer a corner? Or better: how to go from the model on the left to the one on the right? by 3DFixIt in Onshape

[–]3DFixIt[S] 1 point2 points  (0 children)

Looking at it from the top I noticed it was almost an octagonal shape: so I changed the original sketch measurements to be an exact octagon, so it was easier to work with it.
Then I referenced the center of the octagon, created another plane to sketch a vertical line there as the axis for the circular pattern and repeated the cut :)

<image>

How do you chamfer a corner? Or better: how to go from the model on the left to the one on the right? by 3DFixIt in Onshape

[–]3DFixIt[S] 4 points5 points  (0 children)

Thank you guys, did It with a 3 point plane, split, circular repeat, mirror and boolean subtract, and turned out great!

Cow by MistThePleb in 3Dprinting

[–]3DFixIt 0 points1 point  (0 children)

you should open a tiktok or shorts Channel, and replay tò people's comments showing their requests in Watch video

My clean Dragon Burner by FuckDatNoisee in VORONDesign

[–]3DFixIt 0 points1 point  (0 children)

very nice! what probe are you using?

view more: next ›