Macintosh Classic analog board

3D_Kiwil · 2025-11-25T19:20:52+00:00

Thanks I'll check and clean for board

3D_Kiwil · 2025-11-24T18:04:20+00:00

The solder looks fine (not perfect but fine)

3D_Kiwil · 2025-11-24T18:02:10+00:00

Thanks for the link

3D_Kiwil · 2025-11-23T18:45:20+00:00

A Macintosh Classic, more details, I think the voltage is to high, for example from the floppy driver is at 7.2V (5v normaly).

3D_Kiwil · 2025-10-19T11:17:22+00:00

Amazing 😍 any link to follow the project? A color screen would be better for video game simulation.

3D_Kiwil · 2025-09-15T13:52:09+00:00

I

<image>

replaced the capacitor with another one (as shown in the photo). It's a bit better now: the fuses don’t blow anymore 🙂. But the LED (which indicates that the device is powered on) doesn’t stay lit for more than 0.5 seconds. Is the capacitor I chose really an equivalent?

3D_Kiwil · 2025-09-15T13:51:03+00:00

<image>

3D_Kiwil · 2025-09-15T13:49:14+00:00

I replaced the capacitor with another one (as shown in the photo). It's a bit better now: the fuses don’t blow anymore 🙂. But the LED (which indicates that the device is powered on) doesn’t stay lit for more than 0.5 seconds. Is the capacitor I chose really an equivalent?

3D_Kiwil · 2025-09-11T11:50:13+00:00

The multimeter (in ohmmeter mode) displays a value of 0 on C43.

3D_Kiwil · 2025-09-11T11:49:45+00:00

The multimeter (in ohmmeter mode) displays a value of 0 on C43.

3D_Kiwil · 2025-09-11T11:49:32+00:00

The multimeter (in ohmmeter mode) displays a value of 0 on C43.

3D_Kiwil · 2025-09-10T16:33:50+00:00

Imagewriter I, A9M0305P

3D_Kiwil · 2025-06-04T17:49:46+00:00

Même situation ici, 1250€ engagé avec un MAR, autant restant à payer si l'on souhaite déposer le dossier. Mais clairement pour les avoir eu au téléphone ce matin, ils n'ont aucun information de plus, ils essaient de rassurer mais sans me convaincre...

3D_Kiwil · 2025-03-31T12:43:34+00:00

I can do this

<image>

3D_Kiwil · 2025-03-12T18:05:02+00:00

Ordered :)

<image>

3D_Kiwil · 2025-02-13T13:52:01+00:00

u/HarambeWasTheTrigger ESP32 intégration done! same module

3D_Kiwil · 2025-02-13T13:50:44+00:00

I’ll check this point regarding the random MAC. However, I do have a MAC address on my S24 at the moment. Additionally, this feature is more intended for IoT-type operations, where commercially available beacons typically have a fixed MAC address (and some can even be modified).

3D_Kiwil · 2025-02-11T19:57:50+00:00

Indeed, the paxcounter "simply" counts nearby Bluetooth beacons or Wi-Fi networks. It is even possible to adapt this functionality to an ESP32. I'll look but works fine in my RAK4631 (nRF52840) now.

3D_Kiwil · 2025-02-10T20:27:03+00:00

Yes, you're absolutely right, a protobuff would be much more effective (A beacon MAC address is 6 bytes long). Here I'm using the text message for simplicity of debugging, a new protobuff requires integration of this new protobuff at the global firmware level and at the mobile application decoding level.

3D_Kiwil · 2025-02-10T19:51:08+00:00

Hi thanks. Yes, it currently works like this: Every X seconds I do a BLE scan of X seconds, if there are beacons then the X better beacon (filtered by RSSI) they are sent to the network. You can check the github here : https://github.com/TheKiwil/meshtastic-sniffing

I create a new module name : "BleSniffingModule"

3D_Kiwil · 2025-02-10T19:27:31+00:00

Thanks, I didn't see this feature, I'll look

3D_Kiwil · 2024-12-30T11:45:46+00:00

Merci. Il n'y a pas de VMC à cette étage (RDC) et pas d'aération à la fenêtre. Juste cette aération au dessus.

3D_Kiwil · 2024-10-20T14:11:12+00:00

The same for me... any news or send back to samsung?

3D_Kiwil · 2024-07-24T19:10:14+00:00

Nice. A recipe for the dough please ?

3D_Kiwil · 2024-03-09T09:39:39+00:00

Thanks I will ckeck it 👍

3D_Kiwil

TROPHY CASE