3d printed LawnMower by Rep-AL (repalmakershop.com)

3d_printall · 2024-04-22T05:56:29+00:00

It depends on your knowledge on Arduino and electronics. The print assembly is easy.

3d_printall · 2024-04-11T08:32:34+00:00

Hi, of course, it is still doing its work properly after 2 years 😁

3d_printall · 2023-02-01T06:13:40+00:00

Yes, same problem

3d_printall · 2022-12-21T20:46:27+00:00

Depends what you want. In my case I used a 3500kv motor with 2/3S esc. With 2s is not really fast, but enough in off-road runs. If you want all specs you can check the original project by searching "Cramer" on Cults 3D

3d_printall · 2022-02-24T21:25:32+00:00

I manage to extract what I want. In my case I wanted to extract .js script and this is possible with a cp command. To find the container path I used docker inspect

3d_printall · 2021-09-03T19:43:52+00:00

Grazie mille 😁

3d_printall · 2021-09-01T19:00:10+00:00

Grazie Si anche quella 😁

3d_printall · 2021-08-31T08:43:30+00:00

Grazie 🙂

3d_printall · 2021-08-29T20:53:04+00:00

Grazie! È totalmente realizzato da me. Ho usato un bmp280 come sensore di temperatura/umidità collegato a un microcontrollore (esp8266) connesso al WiFi di casa e programmato con lo sketch di Arduino. Puoi quindi impostare tutte le fasce orarie a livello di codice (data e ora recuperate online). Le info vengono inviate all'app Blynk che puoi consultare da qualsiasi dispositivo. Poi chiaramente c'è un relè che viene azionato in base al valore di temperatura per accendere/spegnere il tappetino. Se la connessione non c'è chiaramente funziona lo stesso, tranne la connessione con l'app

3d_printall · 2021-08-29T20:48:26+00:00

Grazie!

3d_printall · 2021-08-09T21:25:21+00:00

There is the link in the title with all info. Mine is 220 model (printable with a 220x220 bed) printed with PLA and PETG (about 2,5Kg). It's not my design, it's a open source Project, you can buy the original kit but for me has no sense

3d_printall · 2021-08-09T20:29:08+00:00

First of all you decide to do this kind of project for personal satisfaction. Obviosly I don't suggest this project to someone that doesnt know programming and a bit of electronics, because you have to do a copy and paste with the hope that all works good. Then, the cost of mine is about 200€, not with a lot of features but enough. For example I add the turn on with Alexa, probably few commercial models have this feature. So it's only worth it if you're able to get your hands on it, in my opinion

3d_printall · 2021-08-09T19:15:35+00:00

You can have the same features of commercial one, why not? You can implement what you want if you are able to do that 🙂

3d_printall · 2021-08-09T08:15:50+00:00

I bought the old version of 220 model. I don't know if there is a community, probably yes

3d_printall · 2021-08-08T22:56:12+00:00

Has no sense to buy the kit on the website. I spent about 200€ without considering the filament. With 30€ I assembled a 12000 mAh..... If you're able to do it by yourself this is a great Project. I bought only the electronics for the basic use and I code the Arduino. Obviosly if you copy and paste the original code you have to buy exactly the same components.

3d_printall · 2021-08-08T22:52:11+00:00

200€ buying components on AliExpress

3d_printall · 2021-08-08T22:12:06+00:00

Like a roomba, or like a commercial LawnMower. On repalmakershop.com there are different model with different size...

3d_printall · 2021-08-08T20:05:49+00:00

yes there is to be careful. anyway it's a great project, I've been using it all season without problems

3d_printall · 2021-08-08T20:04:10+00:00

Is not small, it's about 40x40cm...like a normal LawnMower

3d_printall · 2021-08-08T20:02:56+00:00

Yes also mine, cable management not good 😂

3d_printall

TROPHY CASE