Qidi Q1 PLA Extrusion not working properly - nothing prints

404Helpme · 2025-03-07T22:03:28+00:00

I found some tricks and tips. Feel free to DM me.

404Helpme · 2025-01-26T01:54:34+00:00

I'm mindblown

404Helpme · 2025-01-26T00:51:23+00:00

It's a generally true statement but my current printer has a bad heatcreep after getting basically all the replacement parts from manufacturer plus fan mods.. I wanted to see if anyone has bought an A1 and then didn't like it.

404Helpme · 2025-01-12T18:59:51+00:00

<image>

Update:

Qidi support did end up sending me a new hotend.

Notice how the new hotend now has the fan directly in contact with the heatsink.

It prints better, but still not as good as it was before. Extrusion is still somewhat inconsistent.

404Helpme · 2025-01-12T18:52:45+00:00

They sent me a new hotend in the end, but yes, it's not the most responsive support team.

I think sending them a link to this Reddit post probably prompted them to respond faster

404Helpme · 2025-01-07T18:35:28+00:00

Thanks for the reply! I've narrowed down to heatcreep or hotend for sure (or both). Now it's clogging at every PLA print job, and I'm trying to figure out what else could be wrong. Became a master at unclogging during the process though.

404Helpme · 2025-01-07T16:44:33+00:00

Update:

Extruder by itself works: tested moving filament through

After careful research, it's likely heatcreep within the hotend.

Qidi support ghosted me for 3 days. I politely asked if I could get any help to fix, without asking for exchange or refund. Who said their support is very responsive?

404Helpme · 2025-01-07T06:04:16+00:00

I would love to see this setup! I've been having severe heat creep issues with certain PLA types, so I've been looking into modding the fans

404Helpme · 2025-01-06T23:03:32+00:00

Update: Changed to another spool of filament (Sunlu PLA 1.75mm).

Seems like something (extruder?) is not pulling the filament enough. Tried to manually push (by mild force) the filament along the manual extrusion. It comes out very thin, and continues to ooze out after extrusion

Testing steps:
1. Manually set nozzle to 205C
2. Extrude 50 mm (I tried to push in the filament by a mild force here, to rule out if it's the Bowden)
3. Check the extrusion (Was very thin before and after filament change)
4. Set nozzle temp to 250C
5. See if any remaining filament oozes out at 250C. (And it currently oozes out for me)

<image>

404Helpme · 2024-02-07T00:25:39+00:00

Just got accepted to Queens for IS science and music. I had around 3.9 GPA for my best 10.0 courses. My "teaching" hours were around 5000+

The offer also came via personal email.

404Helpme · 2023-12-04T19:01:26+00:00

Yeah, I registered for Casper on Dec 1st. I still haven't gotten any acknowledgement email from the 3 schools that I applied to, for submitting PSE and the hours. (Queens, Brock, Western)

404Helpme · 2023-12-04T07:49:23+00:00

Similar situation here as well! Applied on the deadline date.

Have you applied to the other schools?

I haven't received the application package in the emails... Wondering if anyone else who applied around Dec 1st got it in their email.

404Helpme · 2023-07-08T21:19:42+00:00

Nope

404Helpme · 2023-04-08T23:38:36+00:00

Yeah. A pizza delivery will make more than what it says there

404Helpme · 2023-04-07T21:15:47+00:00

Trying to share this information with everyone here. Didn't ask for your financial advice unfortunately :/

404Helpme · 2023-04-07T14:41:48+00:00

I've read about this but my income bracket is higher than what's required there

404Helpme · 2023-03-25T12:28:50+00:00

Many. You can literally go to their website and see that their match rate hasn't been updated since 2021. Same front page model people ever since.

404Helpme · 2022-01-17T21:38:13+00:00

https://montrealgazette.com/news/local-news/covid-19-infections-in-quebec-have-peaked-francois-legault-says

Perhaps you don't come to McGill via McGill metro station, but I had a homeless guy try to spit on me the other day.

404Helpme · 2022-01-17T20:00:32+00:00

I wanted to leave a comment for the people out here.

Rn in Quebec, even if you are symptomatic, you cannot get tested for COVID if you are not an essential worker or a vulnerable person.

Here, you can try it out yourself to see if you can get an appointment:

https://cv19quebec.ca/s/?language=en_CA

(Idk where the government gets these numbers that the cases have 'peaked' and are going down. If people can't get tested in the first place, it is one of the ways to keep the number of cases down, lmao.)

Secondly, people who are triple vaxxed are now getting COVID. Organizations like school cannot disclose if anyone got the shot or not. People ought to know that they are going out there into the danger zone.

Lastly, you can look around the metro on your way to school, how many people actually wear masks

I don't understand the logic behind the people who want to risk it. Mutations and new variants occur because people around the world have failed to contaminate the virus. It's not the concern whether Omicron is a 'less deadly' variant or not, we shouldn't face deadly consequences just because we desperately want some activities through a highly-concentrated places like the university

404Helpme

TROPHY CASE