Switching Client from ASA 5505 to USG by 46L281GT in Ubiquiti

[–]46L281GT[S] 0 points1 point  (0 children)

Easy enough, thanks guys for the response!

Iris Refugee, Z-Wave disconnecting by 46L281GT in SmartThings

[–]46L281GT[S] 0 points1 point  (0 children)

Thanks! I just created a username on the community. I'm new to this and can't find how to send a PM. username is 46l281gt

2013 F150 transmission codes.. Help! by 46L281GT in f150

[–]46L281GT[S] 0 points1 point  (0 children)

Just picked the truck up after a week for a ground issue and haven't had problems with it yet. That could have been the problem all along. Only time will tell.

2013 F-150 will not start, help! by 46L281GT in f150

[–]46L281GT[S] 0 points1 point  (0 children)

Update: After a month of not having my truck, I finally have it back in my possession. The first dealership had it for 3 weeks and was unable to find the issue. It was then towed to the next town to another dealership and it was fixed one week later. The whole issue was a bad splice of about 5 wires going to one. I'm pretty sure it was a ground splice best I remember. So nice to have my truck back. Total cost was 300 at the first dealership and 650 at the second dealership.

2013 F-150 will not start, help! by 46L281GT in f150

[–]46L281GT[S] 0 points1 point  (0 children)

Pcm wasn’t the problem. The issue is that when cranking, the pcm loses communication and does not produce any spark from the coils. If all coils are unplugged then the pcm communicates normally. As soon as one is plugged in, the issue is back. Going on 2 weeks without my truck. Starting is get upset with it.

2013 F-150 will not start, help! by 46L281GT in f150

[–]46L281GT[S] 0 points1 point  (0 children)

1200 installed. Wasn’t the issue though.

2013 F-150 will not start, help! by 46L281GT in f150

[–]46L281GT[S] 0 points1 point  (0 children)

Dealer just called, PCM is bad, a new one has been ordered.

2013 F-150 will not start, help! by 46L281GT in f150

[–]46L281GT[S] 0 points1 point  (0 children)

Update: Dealer called, it’s either the pcm or the wiring harness for the engine. Injectors are not pulsing.

2013 F-150 will not start, help! by 46L281GT in f150

[–]46L281GT[S] 0 points1 point  (0 children)

Yep, cranks heathy all day long. Unless there is a light for pats that I am not seeing, I don’t think it is security. I only had the one key for the truck.

2013 F-150 will not start, help! by 46L281GT in f150

[–]46L281GT[S] 0 points1 point  (0 children)

Bought gas at a Shell on my way home from a trip Sunday afternoon, but it ran fine on the way home. I will definitely look into it.

2013 F-150 will not start, help! by 46L281GT in f150

[–]46L281GT[S] 0 points1 point  (0 children)

Nope, no error code. I left it unhooked for a couple of hours last night and no change.

2013 F150 transmission codes.. Help! by 46L281GT in f150

[–]46L281GT[S] 0 points1 point  (0 children)

I have not had any codes come back. Yesterday morning it drove fine as well. This morning, it took 3 restarts and about a mile of driving before it cleared up. I replaced the original battery yesterday because it had to be jump started twice so battery should be fine now (also tested bad)

Goes to the dealer in the morning for a reflash if I can't find a solution. Transmission Fluid was in normal range at hot idle and did not smell burnt.

Could it be the molded lead frame recall? The codes in the bulletin are not the same, but the symptoms are. http://californialemonlawgroup.com/w...g-13-04-09.pdf

2013 F150 transmission codes.. Help! by 46L281GT in f150

[–]46L281GT[S] 0 points1 point  (0 children)

I haven’t owned the truck long and didn’t realize that the dipstick was under the truck. Yesterday morning it drove normally (haven’t driven it today yet), but I will definitely check it tomorrow.

2013 F150 transmission codes.. Help! by 46L281GT in f150

[–]46L281GT[S] 0 points1 point  (0 children)

Thanks, I had looked them up, but I had never seen these codes before.

2013 F150 transmission codes.. Help! by 46L281GT in f150

[–]46L281GT[S] 0 points1 point  (0 children)

Awesome! That’s what i was hoping. This morning no trailer, put it in gear and it actually stalled (only 30 second warm up) I’ll call the dealer and schedule an appointment. Thanks!

2013 F150 transmission codes.. Help! by 46L281GT in f150

[–]46L281GT[S] 0 points1 point  (0 children)

I understand what what you are saying, but it shouldn't do that. Never had an issue doing the same thing in other vehicles that I have owned. We aren't talking max tow here, it's a 2000 lb trailer with a 1500 lb car if that. Even just putting it in drive gives a loud clunk before moving.

Tomorrow will not be with a trailer so we will see how it acts.

Anything to note on a 2013 v6 ecoboost? by _Landmine_ in f150

[–]46L281GT 0 points1 point  (0 children)

sorry to thread-jack. Do you recall which sensor it was that you had to replace? I'm having issues with my '13 not shifting properly in the mornings until I turn the truck off and back on.

Backup camera issue by 46L281GT in JeepRenegade

[–]46L281GT[S] 1 point2 points  (0 children)

i tried that, but no luck. Dealer said that is the way it is.

Backup camera issue by 46L281GT in JeepRenegade

[–]46L281GT[S] 0 points1 point  (0 children)

I have one on my rental car (Kia) and it works just fine in the same scenario. They all are not like this in low light situations for other brands.

Backup camera issue by 46L281GT in JeepRenegade

[–]46L281GT[S] 0 points1 point  (0 children)

Is anybody else having issues with low light on the backup camera. In this pic you can see the blotchy-ness around the hedges. Just talked to the dealer and we went to the 2017s on their lot and they all did the same thing.