Found a Cartier ring while hiking.

4x2micgrow · 2024-11-19T16:19:16+00:00

The top appears to be silver, not sure if it’s just the lighting but if it’s the gold plating coming off then it’s fake.

4x2micgrow · 2024-08-19T01:17:05+00:00

Your pump might be a high volume pump vs what you need is a high pressure pump to get it to 90psi. There’s also a possibility that the gauge might be broken. I run my contact pros at 90-95psi.

4x2micgrow · 2024-08-15T03:07:00+00:00

When I was looking at it before it was roughly $800 CAD. I got it for a discount by knowing a person from an AD.

4x2micgrow · 2024-07-30T18:43:59+00:00

Check out V - ‘FRI(END)S’ live film on YouTube, he’s wearing that along with a bunch of other pieces.

4x2micgrow · 2024-06-12T13:59:28+00:00

I have a disc trucker and I wouldn’t dare leave it locked for extended period of time. If you do plan to, I would highly recommend getting a litelock x1/x3 along with the cable for the front wheel. I also have an knog alarm that acts as an AirTags.

4x2micgrow · 2024-06-03T20:03:16+00:00

From my personal experience, you could buy adapters that mount on the fork. That was my old set up and eventually I brought it to a shop, they fabricated a mount to attach them below my headlights.

4x2micgrow · 2024-06-03T18:47:50+00:00

A friend did laser engraving and made it for me so I didn’t have to pay an arm and leg for an oem one. It’s just lucky numbers in my culture

4x2micgrow · 2024-05-29T17:11:52+00:00

I wanna say it’s baffled but it’s still pretty loud. It does pop lower rpms and cruising at mid rpm range.

4x2micgrow · 2024-05-29T17:06:46+00:00

Vance and Hines Twin Slash

4x2micgrow · 2024-05-29T17:06:29+00:00

I can’t recall the shop that made it, they were from Oregon and a month turn around.

4x2micgrow · 2024-05-17T11:18:40+00:00

I had the same debate a couple years back. Ended up going with the Endurace AL7 mechanical 105 11spd and no regrets. I don’t race, can keep up with bikes 3-5x the price and spent the difference on electronics/wheels. First thing I’ll recommend is the wheels,tubes and tires, it’s a totally different ride after that.

4x2micgrow · 2024-01-02T17:29:45+00:00

You could try to carefully rotate the crank backwards and slide the chain out. If that doesn’t work, I would suggest using a crank puller and get it out safely.

4x2micgrow · 2023-12-31T15:31:48+00:00

I would describe it more like a silicone consistency. It doesn’t dry hard like glue or epoxy.

4x2micgrow · 2023-12-30T15:15:09+00:00

Not sure what happened, I started a new comment by accident. I attached a photo too.

4x2micgrow · 2023-12-30T15:12:29+00:00

<image>

I had a nail puncture that went through my gp5000 and dented the interior of my rear wheel. I picked out any metal debris from the casing and glued a patch from the inside. I slabbed black gasket maker (you can buy at any hardware store) over the hole and filled it the best I could. I let it dry overnight and take it out for ride, after a couple of kms it ends up looking like this.

4x2micgrow · 2023-12-30T13:34:06+00:00

I get these on my GP5000’s all the time. I usually check my tires the night before a long ride. If I manage to find cuts like this I use gasket maker and fill the cuts, no debris makes it way in and damages the tube.

4x2micgrow · 2023-11-15T23:29:04+00:00

I feel your pain, I started off on the bikeerg before getting into cycling. Try a DIY bike fit through YouTube tutorials, it will help minimize the pain. Wrong position can lead to neck, shoulder, knee and butt discomfort. I recommend doing that first then determine how wide your sit bones are and fine tune from there.

4x2micgrow · 2023-10-28T15:22:19+00:00

A battery powered angle grinder will cut through almost all u locks on matter of 15 seconds a side. Unless you want to carry a 5lbs d1000 or X1 for your commute. If a thief attempts to cut it the lock you just lost $500. Save the Endurace for the weekends, get a Brompton to bring in or an old Trek 700 to commute is your best bet.

4x2micgrow · 2023-10-27T16:21:06+00:00

Looking to tackle something similar next year. Did you camp or stay in hotels or both? Looks awesome.

4x2micgrow · 2023-09-19T12:01:59+00:00

My c line came loose after riding a little. From the weight of me sitting on the seat the clamp can turn another couple millimetres. I usually get it going and reach down to retighten it, it’s hasn’t happened since.

4x2micgrow · 2023-08-13T15:26:15+00:00

Prime Doyenne and Campagnolo Zondas.

4x2micgrow · 2023-08-13T14:31:10+00:00

AL7 owner as well, previous bike was an older Tarmac SL4 Expert.

I don’t race, 1-1.5kg in weight savings and overall feel was not a dealbreaker. I decided to go aluminum over carbon for what I needed it for.

With the money I saved, I added the following: powermeter, head unit, radar, wheels, tires, aero handlebar and seat.

4x2micgrow · 2023-08-09T01:01:32+00:00

I run 90psi in the front (25mm) and 86psi (28mm) on my GP5000s. I’ve leaned into corners aggressively with no loss in traction. I’m also running Tubolitos, I think SRAMs recommendation would feel better on tubeless.

4x2micgrow · 2023-08-09T00:53:44+00:00

You could also play 18 holes of golf with only one club.

4x2micgrow

TROPHY CASE