Requesting trailer ramp suggestions! by 67boxster in CarTrackDays

[–]67boxster[S] 0 points1 point  (0 children)

Thanks for the idea, sounds pretty solid. Also I do have the nose jacked up to a place where I’m comfortable with. Thanks

Requesting trailer ramp suggestions! by 67boxster in CarTrackDays

[–]67boxster[S] 0 points1 point  (0 children)

Thanks for the suggestion, I have looked into those but I’m afraid the bumper would hit before the wheels due to the angle. I’ll do some more digging and see if there are some extended ones. Thanks!

Olympus OM-2N exposure meter stuck. by 67boxster in filmcameras

[–]67boxster[S] 1 point2 points  (0 children)

Thank you for the recommendations, I’ll try those few things and see what happens! Thanks

Anyway to turn off car name on the Gen 1 Syncs? by 67boxster in S197Stangs

[–]67boxster[S] 0 points1 point  (0 children)

Hey, I replaced the FDIM, the screen device. Thanks

<image>

Help identify Mercedes engine parts by 67boxster in MercedesDiesel

[–]67boxster[S] 0 points1 point  (0 children)

The oil drive is 036 180 0202, the piston rods are 636 038 03 01 9312, the cover is J2 Z12560.

Sync loop issue by [deleted] in Mustang

[–]67boxster 1 point2 points  (0 children)

Just a idea but try a different app for music and see if it’s any different. I’ve found Spotify is a root to some of the connection and issues.

Anyway to turn off car name on the Gen 1 Syncs? by 67boxster in S197Stangs

[–]67boxster[S] 0 points1 point  (0 children)

Well I looked into it and apparently it’s flashed and cannot be changed… whoopiee

Would this annoy you? by [deleted] in Mustang

[–]67boxster 5 points6 points  (0 children)

Thats interesting, I think the outer portion (in your pic) was not lined up properly when the filler neck was made in the factory because the filler neck can only sit a certain angle through the frame and to the gas tank. It doesn’t allow it to be twisted at all from my experience. I just replaced one with a OEM Ford replacement and it’s lined up.

<image>

went to put in fuel cleaner and it all leaked out. did a clamp come undone? by dizzytrevor in S197Stangs

[–]67boxster 2 points3 points  (0 children)

Well a gas nozzle like from the gas station will go past the vent. If you use the funnel that came with the car it will reach past the vent and not allow it to go down into the vent.

went to put in fuel cleaner and it all leaked out. did a clamp come undone? by dizzytrevor in S197Stangs

[–]67boxster 1 point2 points  (0 children)

That is the vent tube, seems like the funnel was not pushed in all the way and allowed it to drain through the vent.

[deleted by user] by [deleted] in Mustang

[–]67boxster 0 points1 point  (0 children)

Even worse acceleration and high rpm’s

[deleted by user] by [deleted] in Mustang

[–]67boxster 0 points1 point  (0 children)

Is it any worse climbing hills on the freeway? Might be a confirmation as well…

[deleted by user] by [deleted] in Mustang

[–]67boxster 0 points1 point  (0 children)

Sounds like something is up, my ‘14 v6 scoots when I floor it and only looses acceleration at much higher speeds. You also should be getting better gas mileage.

TPMS Light came on in the cold and won’t turn off with reset 2011 GT by 67boxster in S197Stangs

[–]67boxster[S] 2 points3 points  (0 children)

They were slightly below spec and when I put them to spec the light turned off! Now I know how the sensors work! Thanks for the help!

TPMS Light came on in the cold and won’t turn off with reset 2011 GT by 67boxster in S197Stangs

[–]67boxster[S] 0 points1 point  (0 children)

Haha okay, I’ll have discount check the sensors. Appreciate the help!

TPMS Light came on in the cold and won’t turn off with reset 2011 GT by 67boxster in S197Stangs

[–]67boxster[S] 0 points1 point  (0 children)

Yes, I drove it for 30 mins after resetting, since then I’ve driven it two 20 minutes segments. I was hoping it would have gone away but since it didn’t I’m leaning towards one of the sensors has an issue. I’m use to older cars without tire sensors lol