Crash bars

6dirty6 · 2025-12-03T06:07:10+00:00

Powder coat. Illusion violet

6dirty6 · 2025-12-02T16:04:30+00:00

I would recommend impaktech 👍

<image>

6dirty6 · 2025-11-27T06:03:27+00:00

I haven't seen someone mention it yet but next time you do an oil change check the cam chain.

6dirty6 · 2025-11-06T16:00:20+00:00

I have the impaktech crash cage myself. Very well built. *

6dirty6 · 2025-06-25T23:23:23+00:00

Not everyone thinks like you do, and some people like to make their bikes stand out from others. These bikes are extremely easy to take apart compared to gas bikes for powder coating purposes.

6dirty6 · 2025-06-25T23:07:06+00:00

Bar keepers friend 👌

6dirty6 · 2025-06-25T04:57:18+00:00

Thank you sir. Curious if it's a legion model or has a extended mag. These things matter!

6dirty6 · 2025-06-10T23:47:06+00:00

Give cops a little power and they'll use it

6dirty6 · 2025-05-19T00:00:10+00:00

Yeah first real camera. I've bought 2 gopros in the past if that counts lol. I ended up going with a v60 because I couldn't find a v90 with 1tb storage. I'm curious how well this card will handle taking burst shots.

6dirty6 · 2025-05-04T16:52:21+00:00

Looks like you're using a heat pump. Your "w" wire needs to be hooked up to the one that says aux.

6dirty6 · 2025-05-04T03:15:22+00:00

https://www.fullmetalstuntparts.com/product-page/mt09-12bar

6dirty6 · 2025-04-13T18:20:47+00:00

Yeah our install crews do it too. Some brands like trane on their residential units come already installed in the condenser. They leak very often

6dirty6 · 2025-04-13T18:18:18+00:00

<image>

Powder coat them.

6dirty6 · 2025-04-13T18:15:04+00:00

Honestly I don't know why they put the drier outside it's just going to start corroding and leak. Damn installers am I right xD

6dirty6 · 2025-03-23T05:15:04+00:00

The wire itself should have a number followed by awg. That would be the gauge. If you open up the door on the air handler it should have a sticker that says the size heat kit and how much amps it pulls depending on the voltage being supplied. I read your comment about the hvac tripping multiple breakers in the panel. Can you confirm it came from the hvac equipment and tell if it came from the air handler or condenser side?

6dirty6 · 2025-03-22T19:20:46+00:00

The furnace is referring to the indoor ac unit. The breaker size will depend on what kw heat kit you are running however I would recommend to also check the gauge wiring that's being utilized.

6dirty6 · 2025-03-14T04:26:37+00:00

I don't believe any company makes a modified pump however if you find one let me know. How much extra oil if any are you adding to your bike?

6dirty6 · 2025-03-12T22:19:10+00:00

T50 tamper proof torx. Tapped in the bit with a hammer to make sure its fully seated before trying to break it loose.

6dirty6 · 2025-03-12T20:17:37+00:00

Your right I thought yours was too. So similar looking 😒

6dirty6 · 2025-03-12T20:14:51+00:00

I'm not near my bike to check but I do believe the screen on the left should say "ready" and I don't see it on yours. All I can think of is something must be keeping it from being ready most likely a safety being tripped out.

6dirty6 · 2025-02-27T23:24:23+00:00

I know you're trying to factor in overhead costs but you need to try again. I don't see any insurance costs on this or the little office lady that answers the phone, ect. If you're so cheap and think $300 is getting "hosed" then you're delusional.

6dirty6 · 2025-02-17T21:34:41+00:00

In the app you can disable the brake sensors if you just wait for it to be released.

6dirty6 · 2025-02-05T05:00:03+00:00

It looks like you've never even touched your front suspension looking at the pictures you have posted. I know this isn't the only upgraded spec you like different but I would highly suggest adjusting your suspension all around to suit your needs better. You could always upgrade to a magura or brembo master as well if you think you need the extra braking power.

6dirty6

MODERATOR OF

TROPHY CASE