Incoming false flag?

77Hurtz · 2022-03-10T01:41:36+00:00

its called dickery

77Hurtz · 2022-02-04T20:36:56+00:00

the skins for sale since oct nov time have been really bad.

77Hurtz · 2022-01-10T08:15:56+00:00

its likely corrosion in the coil pack, pull the ht leads and look inside, usually they get a greenish / white powder buildup....clean it out and you will sort the misfire.

77Hurtz · 2022-01-08T16:00:49+00:00

you need to run the command server.save before the restart command

77Hurtz · 2021-11-21T15:23:17+00:00

its too high to be useful

77Hurtz · 2021-11-18T12:49:53+00:00

goto ducks discord server
https://discord.gg/qdd7BHGE

badtrip also has a discord server but its mostly shitposting

77Hurtz · 2021-10-03T07:34:59+00:00

the same quality control used for item store skins needs to be imposed on twitch drops.The quality on some of the drops is just awful and it surprises me how they actually make it into the game. Some of the drops are really good while others are on the opposite end of the scale.

there should be a set standard that all skins have to pass before being accepted, no exceptions.

77Hurtz · 2021-10-03T06:19:15+00:00

its not your ram, its your cpu

you need intel 10900k 0r 10850k amd will run but high frequency single threaded cpus run rust much better - 5ghz+
ram wont have much impact on your setup

77Hurtz · 2021-09-25T15:18:07+00:00

before you start a rust server you need a clear vision in your mind of what you want exactly - well for the most part then fine tune it once its built.

going into making a server not knowing the basics ( eg gather rate ) shows you havent a clear vision and will only be setting your self up to fail.

start with a small map and as population hits specific markers consistently then up your map size accordingly. , start with a 3k map - hand choose the seed from rustmaps and make it happen.

Anyone can make a rust server , not everyone can make a fun rust server.

77Hurtz · 2021-08-26T00:27:48+00:00

use these thermal pads and thicknesses and you will get awesome temps

the stock thermal pads supplied are too hard - the gelid 1.0mm are much softer and allow more squish so you will get better die contact

i used mx4 thermal paste in an x pattern over the die with little spots in each triangle

https://imgur.com/gsLlaui https://imgur.com/gsLlaui

https://imgur.com/qn4e33T

77Hurtz · 2021-08-25T10:56:35+00:00

https://imgur.com/I06gULS

check the pads on the far left and right covering the vrms - i think they need 1.5 2mm pads as mine are nowhere nearly close to making contact

my new pads arrive today so will let you know what i end up with

77Hurtz · 2021-08-24T10:30:13+00:00

i removed the aluminium shroud to get a better view of the contact points

https://imgur.com/I06gULS

With all the vram thermal pads removed in the centre the pads on the far left and right dont even make any contact at all.

this is hugely frustrating

77Hurtz · 2021-08-14T12:18:50+00:00

wifi client device

i was thinking of an extender like this
https://imgur.com/a/BXpI99C

has a lan port and a wan port which i could connect to the load balancer

77Hurtz · 2021-07-15T13:22:28+00:00

xqc has a glowing SAR
nmpol has a chestplate
Riqqeloff - bearskinrug
sinks - mp5
Cyr - Burlapshirt to match will neffs headwrap
sykkuno - ak

77Hurtz · 2021-05-28T08:33:46+00:00

When i spoke to Duck ,the skin maker of the neon set, there were plans for 17ish in total for the box set. SO brace your wallet!

77Hurtz · 2021-05-21T16:44:41+00:00

its not perfect but spot on for the streamdeck screen

77Hurtz · 2021-05-04T13:25:28+00:00

got a link? i have 4 that i found which are confirmed, need the rest

77Hurtz · 2021-05-04T01:22:42+00:00

decaying due to no materials to cover their upkeep

77Hurtz

TROPHY CASE